Preliminary studies on ion-pair extractions of Zr, Hf, Nb, and Ta using extractants having tertiary N atom from HSO and HF

Sasaki, Yuji; Kaneko, Masashi; Matsumiya, Masahiko*

Chemistry Letters, 53(9), p.upae164_1 - upae164_4, 2024/09

https://doi.org/10.1093/chemle/upae164

Ion-pair extractions enable to recover the anionic metal ions, such as TcO and ReO, using cationic extractant. Recently the noble metals in hydrochloric acid are extracted by extractants having secondary and tertiary amino N atoms in their structures. Following this, extractions of Zr, Hf, Nb and Ta, metal anions present in sulfonic and hydrofluoric acids, are examined using this technique. Zr and Hf in HSO, and Zr, Hf, Nb and Ta in HF can be extracted by NTAamide, MIDOA and TOA, and a basic information on their extraction behavior is obtained in this work.

NMR study of C-A-S-H structures

Hanamachi, Yuji*; Walker, C.*; Sasamoto, Hiroshi; Mihara, Morihiro

NIMS Bisai Kozo Kaiseki Purattofuomu Riyo Hokokusho (Internet), 2 Pages, 2023/12

A High-volume Fly ash Silica fume Cement (HFSC) has been considered as the use of concrete support of drift in deep disposal of radioactive wastes. JAEA has been carried out experiments and modeling studies to evaluate chemical stability of C-A-S-H gel synthesized which would be believed as the dominant component of the HFSC. For the modeling purpose, it is necessary to evaluate the chemical composition both of C-A-S-H gel synthesized and accompanied minerals in the experiment. In the year of 2020, Al and Si NMR measurement were performed to identify Al and Si distribution in the sample and chemical composition of C-A-S-H gel was derived. However, it was impossible to derive the C-A-S-H gel composition having the expected Al/Si molar ratio since there were several accompanied minerals produced in the experiment due to the short term of immersion. This time similar approach to derive C-A-S-H gel composition is adopted using NMR measurement for the sample of longer time (6 months).

NMR study of C-A-S-H structures

Walker, C.*

NIMS Bisai Kozo Kaiseki Purattofuomu Riyo Hokokusho (Internet), 2 Pages, 2021/09

High content fly ash silica fume cement (HFSC) has been considering a candidate low alkali cements for the geological disposal of radioactive waste in Japan. JAEA has been currently performing many experiments and modeling studies relevant to validation for the long-term stability of the C-A-S-H gel which is a dominant component of the HFSC. For developing the C-A-S-H model of hydration and degradation, it is necessary to determine the composition of C-A-S-H gel and accompanied minerals when it reacts with water. In the present subject, the synthesized sample of C-A-S-H gels were analyzed by using the NMR spectra of Al and Si to determine the coordination of these element in the C-A-S-H gel.

Precise chemical state analyses of ultrathin hafnium films deposited on clean Si(111)-77 surface using high-resolution core-level photoelectron spectroscopy

Kakiuchi, Takuhiro*; Matoba, Tomoki*; Koyama, Daisuke*; Yamamoto, Yuki*; Kato, Daiki*; Yoshigoe, Akitaka

Surface Science, 701, p.121691_1 - 121691_8, 2020/11

https://doi.org/10.1016/j.susc.2020.121691

Ultrathin hafnium films on Si(111)-77 were studied using synchrotron radiation photoelectron spectroscopies to reveal the chemical states at interface and surface. Ultrathin Hf layers grow on clean Si(111)-77 surface by lever rule. Surface and interface of Hf/Si(111) contain three components (metallic Hf layers, Hf monosilicide (HfSi) and Si-rich Hf silicide). Ultrathin Hf layers changes HfSi islands on bared Si(111)-77 surface after annealing at 1073 K. It was found that the long axes of the rectangle islands expand the direction connecting the corner holes in DAS model of clean Si(111)-77 surface.

The In-situ experiment for performance confirmation of engineered barrier system at Horonobe Underground Research Laboratory; Consideration of concrete-type plug composition

Nakayama, Masashi; Niunoya, Sumio*; Miura, Norihiko*; Takeda, Nobufumi*

JAEA-Research 2017-016, 62 Pages, 2018/01

JAEA-Research-2017-016.pdf:19.99MB

The Horonobe URL Project has being pursued by JAEA to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formation at Horonobe, Hokkaido. The URL Project consists of 2 major research areas, "Geoscientific Research" and "Research and Development on Geological Disposal Technologies", and proceeds in 3 overlapping phases, over a period of around 20 years. Phase III (Investigations in the underground facilities) investigation was started in 2010 FY. The in-situ experiment for performance confirmation of engineered barrier system (EBS experiment) had started 2013 at GL-350 m gallery, and heating by electric heater in simulated overpack had started in January, 2015. One of objectives of the EBS experiment is acquiring data concerned with THMC coupled behavior. These data will be used in order to confirm the performance of engineered barrier system. This report shows consideration of concrete-type plug composition. The low alkaline cement developed by JAEA, called HFSC, was used for the plug. HFSC has used in construction test at the gallery as shotcrete in Horonobe URL.

Basic properties of the concrete using the low alkaline cement (HFSC) developed by JAEA

Seno, Yasuhiro*; Nakayama, Masashi; Sugita, Yutaka; Tanai, Kenji; Fujita, Tomoo

JAEA-Data/Code 2016-011, 164 Pages, 2016/11

JAEA-Data-Code-2016-011.pdf:8.45MB
JAEA-Data-Code-2016-011-appendix(CD-ROM).zip:0.1MB

The cementitious materials are used as candidate materials for the tunnel support of the deep geological repository of high-level radioactive wastes (HLW).Generally the pH of leachate from concrete mixed Ordinary Portland Cement (OPC) shows a range of 12 to 13. The barrier function of bentonite used as a buffer material and that of host rock might be damaged by the high alkaline leachate from cementitious materials. Therefore, low alkalinity that does not damage each barrier function is necessary for cementitious materials used for the tunnel support system of the HLW geological repository. JAEA has developed a low alkaline cement named as HFSC (Highly Fly-ash contained Silicafume Cement) which the pH of the cement leachate could lower approximately 11. We have confirmed the applicability of HFSC for the tunnel support materials, by using experimentally as the shotcreting materials to the part of gallery wall at 140m, 250m and 350m depth in Horonobe Underground Research Laboratory. And moreover, HFSC has been used as the cast-in-place concrete for the shaft lining concrete at the depth of 374m-380m. This Data/Code summarized the past HFSC mix proportion test results about the fresh concrete properties and hardened concrete properties, in order to offer the information as a reference for selecting the mix proportion of HFSC concrete adopted to the disposal galleries et al. in the future.

Long-term immersion experiments of low alkaline cementitious materials

Seno, Yasuhiro*; Noguchi, Akira*; Nakayama, Masashi; Sugita, Yutaka; Suto, Shunkichi; Tanai, Kenji; Fujita, Tomoo; Sato, Haruo*

JAEA-Technology 2016-011, 20 Pages, 2016/07

JAEA-Technology-2016-011.pdf:7.56MB

Cementitious materials are expected to be used for the construction of an underground repository for the geological disposal of radioactive wastes. Ordinary Portland Cement(OPC) would conventionally be used in the fields of civil engineering and architecture, however, OPC has the potential to generate a highly alkaline plume (pH12.5), which will likely degrade the performance of other barriers in the repository such as the bentonite buffer and/or host rock. Low alkaline cementitious materials are therefore being developed that will mitigate the generation of a highly alkaline plume. JAEA has developed a High-volume Fly ash Silica fume Cement (HFSC) as a candidate low alkaline cementitious material. The workability of the HFSC shotcrete was confirmed by conducting In-situ full scale construction tests in the Horonobe underground research laboratory. This report summarizes the results of immersion tests to assess the long-term pH behavior of hardened HFSC cement pastes made with mix designs that are expected to be able to be used in the construction of an underground repository in Japan.

Experimental examination of heat removal limitation of screw cooling tube at high pressure and temperature conditions

Ezato, Koichiro; Suzuki, Satoshi; Dairaku, Masayuki; Akiba, Masato

Fusion Engineering and Design, 81(1-7), p.347 - 354, 2006/02

https://doi.org/10.1016/j.fusengdes.2005.06.360

no abstracts in English

Critical heat flux testing on screw cooling tube made of RAFM-steel F82H for divertor application

Ezato, Koichiro; Suzuki, Satoshi; Dairaku, Masayuki; Akiba, Masato

Fusion Engineering and Design, 75-79, p.313 - 318, 2005/11

https://doi.org/10.1016/j.fusengdes.2005.06.113

no abstracts in English

Precision hfs of Cs( = 1.63 m) by ABMR

Pinard, J.*; Duong, H. T.*; Marescaux, D.*; Stroke, H. H.*; Redi, O.*; Gustafsson, M.*; Nilsson, T.*; Matsuki, S.*; Kishimoto, Yasuaki*; Kominato, K.*; et al.

Nuclear Physics A, 753(1-2), p.3 - 12, 2005/05

https://doi.org/10.1016/j.nuclphysa.2005.01.036

The hfs separation of Cs( m) in the 6s S ground state was obtained in a precision measurement near zero magnetic field by means of atomic beam magnetic resonance with laser optical pumping on-line with the CERN-PSB-ISOLDE mass separator. The result, MHz, corrects significantly a previous published value from a high-field experiment. With our result, the precision of the nuclear magnetic moment, Cs), is now limited by the influence of extended nuclear structure on the hfs (the Bohr-Weisskopf effect).