Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.
High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02
As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.
Ueta, Shohei; Mizuta, Naoki; Fukaya, Yuji; Goto, Minoru; Tachibana, Yukio; Honda, Masaki*; Saiki, Yohei*; Takahashi, Masashi*; Ohira, Koichi*; Nakano, Masaaki*; et al.
Nuclear Engineering and Design, 357, p.110419_1 - 110419_10, 2020/02
The concept of a plutonium (Pu) burner HTGR is proposed to incarnate highly-effective Pu utilization by its inherent safety features. The security and safety fuel (3S-TRISO fuel) employs the coated fuel particle with a fuel kernel made of plutonium dioxide (PuO) and yttria stabilized zirconia (YSZ) as an inert matrix. This paper presents feasibility study of Pu burner HTGR and R&D on the 3S-TRISO fuel.
Aihara, Jun; Goto, Minoru; Ueta, Shohei; Tachibana, Yukio
JAEA-Data/Code 2019-018, 22 Pages, 2020/01
Concept of Pu-burner high temperature gas-cooled reactor (HTGR) was proposed for purpose of more safely reducing amount of recovered Pu. In Pu-burner HTGR concept, coated fuel particle (CFP), with ZrC coated yttria stabilized zirconia (YSZ) containing PuO (PuO-YSZ) small particle and with tri-structural isotropic (TRISO) coating, is employed for very high burn-up and high nuclear proliferation resistance. ZrC layer is oxygen getter. On the other hand, we have developed Code-B-2.5.2 for prediction of pressure vessel failure probabilities of SiC-tri-isotropic (TRISO) coated fuel particles for HTGRs under operation by modification of an existing code, Code-B-2. The main purpose of modification is preparation of applying code for CFPs of Pu-burner HTGR. In this report, basic formulae are described.
JAEA-Technology 2019-010, 22 Pages, 2019/07
Transition phenomena from laminar to turbulent flow are roughly classified into three categories. Circular pipe flow of the third category is linearly stable against any small disturbance, despite that flow actually transitions and transitional flow exhibits intermittency. These are among major challenges that are yet to be resolved in fluid dynamics. Thus, author proposes hypothesis as follows; "Flow in a circular pipe transitions from laminar flow because of vortices released from separation bubble forming in vicinity of inlet of pipe, and transitional flow becomes intermittent because vortex-shedding is intermittent." Present hypothesis can easily explain why linear stability theory has not been able to predict transition in circular pipe flow, why circular pipe flow actually transitions, why transitional flow actually exhibits intermittency even due to small disturbance, and why numerical analysis has not been able to predict intermittency of transitional flow in circular pipe.
Aihara, Jun; Ueta, Shohei; Goto, Minoru; Inaba, Yoshitomo; Shibata, Taiju; Ohashi, Hirofumi
JAEA-Technology 2018-002, 70 Pages, 2018/06
HTFP code is code for calculation of additional release amount of fission product (FP) from fuel rod in high temperature gas-cooled reactor (HTGR) after stop of fission. Minory changed Fornax-A code also can calculate that. Therefore, release behavior of Cs calculated with HTFP code was compared with that calculated with minory modified FORNAX-A code in this report. Release constants of Cs evaluated with minory modified FORNAX-A code are rather different from default values for HTFP code.
Kasahara, Seiji; Imai, Yoshiyuki; Suzuki, Koichi*; Iwatsuki, Jin; Terada, Atsuhiko; Yan, X.
Nuclear Engineering and Design, 329, p.213 - 222, 2018/04
A conceptual design of a practical large scale plant of the thermochemical water splitting iodine-sulfur (IS) process flowsheet was carried out as a heat application of JAEA's commercial high temperature gas cooled reactor GTHTR300C plant design. Innovative techniques proposed by JAEA were applied for improvement of hydrogen production thermal efficiency; depressurized flash concentration HSO using waste heat from Bunsen reaction, prevention of HSO vaporization from a distillation column by introduction of HSO solution from a flash bottom, and I condensation heat recovery in an HI distillation column. Hydrogen of about 31,900 Nm/h would be produced by 170 MW heat from the GTHTR300C. A thermal efficiency of 50.2% would be achievable with incorporation of the innovative techniques and high performance HI concentration and decomposition components and heat exchangers expected in future R&D.
Noguchi, Hiroki; Takegami, Hiroaki; Kasahara, Seiji; Tanaka, Nobuyuki; Kamiji, Yu; Iwatsuki, Jin; Aita, Hideki; Kubo, Shinji
Energy Procedia, 131, p.113 - 118, 2017/12
The IS process is the most deeply investigated thermochemical water-splitting hydrogen production cycle. It is in a process engineering stage in JAEA to use industrial materials for components. Important engineering tasks are verification of integrity of the total process and stability of hydrogen production in harsh environment. A test facility using corrosion-resistant materials was constructed. The hydrogen production ability was 100 L/h. Operation tests of each section were conducted to confirm basic functions of reactors and separators, etc. Then, a trial operation for integration of the sections was successfully conducted to produce hydrogen of about 10 L/h for 8 hours.
Noguchi, Hiroki; Takegami, Hiroaki; Kamiji, Yu; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji
Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.1029 - 1038, 2016/11
JAEA has been conducting R&D on the IS process for nuclear-powered hydrogen production. We have constructed a 100 NL/h-H-scale test apparatus made of industrial materials. At first, we investigated performance of components in this apparatus. In this paper, the test results of HSO decomposition, HI distillation, and HI decomposition were shown. In the HSO section, O production rate is proportional to HSO feed rate and SO decomposition ratio was estimated about 80%. In HI distillation section, we confirmed to acquire a concentrated HI solution over azeotropic HI composition in the condenser. In HI decomposition section, H could be produced stably by HI decomposer and decomposition ratio was about 18%. The HSO decomposer, the HI distillation column, and the HI decomposer were workable. Based on the results added to that shown in Series I, we conducted a trial continuous operation and succeeded it for 8 hours.
Tanaka, Nobuyuki; Takegami, Hiroaki; Noguchi, Hiroki; Kamiji, Yu; Iwatsuki, Jin; Aita, Hideki; Kasahara, Seiji; Kubo, Shinji
Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.1022 - 1028, 2016/11
Japan Atomic Energy Agency (JAEA) has manufactured 100 NL/h-H-scale hydrogen test apparatus. In advance to conduct the continuous operation, we investigated performance of the components in each section of the IS process. In this paper, the results of test of Bunsen and HI concentration sections was shown. In Bunsen reaction, section, we confirmed that outlet gas flow rate included no SO gas, indicating that all the feed SO gas was absorbed to the solution in the Bunsen reactor for the Bunsen reaction. On the basis of these results, we evaluated that Bunsen reactor was workable. In HI concentration section, HI concentration was conducted by EED stack. As a result, it can concentrate HI in HIx solution as theoretically predicted on the basis of the previous paper. Based on the results added to that shown in Series II, we have conducted a trial continuous operation and succeeded it for 8 hours.
Aihara, Jun; Ueta, Shohei; Nishihara, Tetsuo
JAEA-Technology 2015-040, 32 Pages, 2016/02
Original FORNAX-A is a calculation code for amount of fission product (FP) released from fuel rods of pin-in-type high temperature gas-cooled reactors (HTGRs). This report is for explanation what calculations become possible with minor changed FORNAX-A.
Dipu, A. L.; Ohashi, Hirofumi; Hamamoto, Shimpei; Sato, Hiroyuki; Nishihara, Tetsuo
Annals of Nuclear Energy, 88, p.126 - 134, 2016/02
The tritium concentration in the high temperature engineering test reactor (HTTR) was measured during the high temperature continuous operation for 50 days. The tritium concentration in the primary helium gas increased after startup and reached a maximum value. It then decreased slightly over the course during the normal operation phase. Decrease of concentration of tritium in primary helium gas during the normal operation phase could be attributed to the effect of tritium chemisorption on graphite. The tritium concentration in the secondary helium gas showed a peak value during the power ramp up phase. Afterwards, it decreased gradually at the end of normal power operation. It was assessed that the concentration and total quantity of tritium in the secondary helium cooling system for the HTTR-Iodine Sulfur (IS) system can be maintained below the regulatory limits, which means the hydrogen production plant can be exempt from the safety function of the nuclear facility.
Kawamoto, Yasuko*; Nakaya, Hiroyuki*; Matsuura, Hideaki*; Katayama, Kazunari*; Goto, Minoru; Nakagawa, Shigeaki
Fusion Science and Technology, 68(2), p.397 - 401, 2015/09
To start up a fusion reactor, it is necessary to provide a sufficient amount of tritium from an external device. Herein, methods for supplying a fusion reactor with tritium are discussed. Use of a high temperature gas cooled reactor (HTGR) as a tritium production device has been proposed. So far, the analyses have been focused only on the operation in which fuel is periodically exchanged (batch) using the block type HTGR. In the pebble bed type HTGR, it is possible to design an operation that has no time loss for refueling. The pebble bed type HTGR (PBMR) and the block type HTGR (GTHTR300) are assumed as the calculation and comparison targets. Simulation is made using the continuous-energy Monte Carlo transport code MVPBURN. It is shown that the continuous operation using the pebble bed type HTGR has almost the same tritium productivity compared with the batch operation using the block type HGTR. The issues for pebble bed type HTGR as a tritium production device are discussed.
Nomoto, Yasunobu; Aihara, Jun; Nakagawa, Shigeaki; Isaka, Kazuyoshi; Ohashi, Hirofumi
JAEA-Data/Code 2015-008, 39 Pages, 2015/06
HTFP is a calculation code for amount of additionally released fission product (FP) from fuel rods of pin-in-type according to transient of core temperature at the accident of high temperature gas-cooled reactors (HTGRs). This code analyzes FP release inventory from core according to the transient of core temperature at the accident as an input data and considering FP release rate from a fuel compact and a graphite sleeve and radioactive decay of FP. This report describes the outline of HTFP code and its input data. The computed solutions using the HTFP code were compared to those of HTCORE code, which was used for the design of the High Temperature Engineering Test Reactor (HTTR) to validate the analysis models of the HTFP code. The comparison of HTFP code results with HTCORE code results showed the good agreement.
Takei, Masanobu*; Kosugiyama, Shinichi*; Mori, Tomoaki; Katanishi, Shoji; Kunitomi, Kazuhiko
Nihon Genshiryoku Gakkai Wabun Rombunshi, 5(2), p.109 - 117, 2006/06
no abstracts in English
Sawa, Kazuhiro; Ueta, Shohei; Shibata, Taiju; Sumita, Junya; Ohashi, Jumpei; Tochio, Daisuke
JAERI-Tech 2005-024, 34 Pages, 2005/03
The Very-High-Temperature Reactor (VHTR) is one of the strong candidates for the Generation IV Nuclear Energy System. JAERI has developed Zirconium carbide (ZrC)-coated fuel particle and ZrC coating layer is expected to maintain its intactness under higher temperature and burn-up comparing conventional SiC-coating layer. JAERI carries out (1) ZrC-coating process development by large-scale coater, (2) inspection method development and (3) irradiation test and post irradiation experiment of ZrC coated particles. Also, JAERI carries out reactivity insertion tests to clarify the coating failure mechanism and tries to increase allowable temperature limit in case of reactivity insertion accident. Furthermore, JAERI develops non-destructive evaluation methods for mechanical properties of graphite components by ultrasonic testing and micro-indentation technique. This report describes these research and development plan and results of FY 2004 as a MEXT contact research.
Takei, Masanobu; Katanishi, Shoji; Kunitomi, Kazuhiko; Izumiya, Toru*
Nihon Genshiryoku Gakkai Wabun Rombunshi, 2(4), p.490 - 499, 2003/12
no abstracts in English
Ogawa, Toru; Minato, Kazuo; Sawa, Kazuhiro
Proceedings of 11th International Conference on Nuclear Engineering (ICONE-11) (CD-ROM), 6 Pages, 2003/04
no abstracts in English
Sogabe, Toshiaki; Ishihara, Masahiro; Baba, Shinichi; Kojima, Takao; Tachibana, Yukio; Iyoku, Tatsuo; Hoshiya, Taiji; Hiraoka, Toshiharu*; Yamaji, Masatoshi*
JAERI-Research 2002-026, 22 Pages, 2002/11
Carbon Fiber Reinforced Carbon-carbon Composites, C/C composites, have been developed and extensively studied their characteristics. C/C composites are considered to be promising materials for the application of a control rod in the next high performance high temperature gas-cooled reactors. In the present paper, details of the development of the candidate C/C composite are described. In the course of the development of the material, especially, feasibility of the production, stableness of the supply and cost are much taken into consideration. As the physical properties of the material, high mechanical strength such as tensile and bending, high fracture strain and fracture toughness and low dimensional change by neutron irradiation have to be met. The developed 2D-C/C composite consists of plain-weave PAN-based carbon fiber cloth and pitch derived matrix. Also, high purification up to the level of nuclear grade was successfully attained in the composite.
Zusetsu Zoryu; Tsubu No Sekai Arekore, p.131 - 133, 2001/10
no abstracts in English
*; Miyamoto, Yoshiaki; Akino, Norio; Shiina, Yasuaki; Hishida, Makoto*; Ogawa, Masuro; Fumizawa, Motoo; Inagaki, Yoshiyuki; Takeda, Tetsuaki; Takada, Shoji; et al.
JAERI-Review 98-024, 403 Pages, 1999/01
no abstracts in English