Key achievements in elementary R&D on water-cooled solid breeder blanket for ITER test blanket module in JAERI

Suzuki, Satoshi; Enoeda, Mikio; Hatano, Toshihisa; Hirose, Takanori; Hayashi, Kimio; Tanigawa, Hisashi; Ochiai, Kentaro; Nishitani, Takeo; Tobita, Kenji; Akiba, Masato

Nuclear Fusion, 46(2), p.285 - 290, 2006/02

https://doi.org/10.1088/0029-5515/46/2/012

This paper presents significant progress in R&D of key technologies on the water-cooled solid breeder blanket for the ITER-TBM in JAERI. By the improvement of heat treatment process for blanket module fabrication, a fine-grained microstructure of F82H, can be obtained by homogenizing it at 1150 C followed by normalizing at 930 C after the HIP process. Moreover, a promising bonding process for a tungsten armor and an F82H structural material was developed by using a uniaxial hot compression without any artificial compliant layer. Also, it has been confirmed that a fatigue lifetime correlation, which was developed for ITER divertor, can be applicable for F82H first wall mock-up. As for R&D on a breeder material, LiTiO, the effect of compression loads on thermal conductivity of pebble beds has been clarified. JAERI have extensively developed key technologies for ITER-TBM, and now steps up into an engineering R&D stage, where integrated performance of TBM structures will be demonstrated by scalable mock-ups.