Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Konno, Chikara; Ikeda, Yujiro
Journal of Nuclear Science and Technology, 39(Suppl.2), p.1037 - 1040, 2002/08
no abstracts in English
; Takemura, Morio*
JNC TJ9440 2000-005, 157 Pages, 2000/03
With use of the two-dimensional discrete ordinates code DORT and the standard groupwise shielding design library JSSTDL produced from the latest evaluated nuclear data library JENDL-3.2, experimental analyses for the representative configurations in the Radial Shield Attenuation Experiment of the JASPER were performed. The results were compared with those obtained with use of traditional method DOT3.5/JSDJ2 for the previous JASPER experimetal analyses. In general, the change of the cross section library gives higher results and the change of the transport code gives lower results. Finally the new analysis method gives better agreement with the experimental results and also less deviations of calculational errors between various detectors. Experimental analyses for the thick concrete configulation in the Gap Streaming Experiment of the JASPER was also performed with the new analysis method, after solving the poor agreement found in last year with the original JASPER experimental analyses. The same tendency due to the library change was confirmed with the above mentioned analyses of the Radial Shield Attenuation Experiment. Compilation of the input data necessary for future reanalyses of important configurations in JASPER experiments were continued through the above-mentioned experimental analyses and related informations were added for repletion of the database preserved in a computer disk holding previously accumulated data. Input data descriptions were made for auxiliary routines needed for the experimental analyses and their sample data were compiled and stored in the database.
Hasegawa, Akira; Yamano, Naoki*
Journal of Nuclear Science and Technology, 37(Suppl.1), p.723 - 727, 2000/03
no abstracts in English
Takemura, Morio*
PNC TJ9055 97-001, 112 Pages, 1997/03
With use of a standard groupwise shielding design library JSSTDL produced from the latest evaluated nuclear data library JENDL-3.2, experimental analyses for the Axial Shield Experiment (homogeneous and central blockage type shield configurations with BC or stainless steel shield material) were performed. The results were compared with those obtained by the same analysis method and input data using JSDJ2 library that had been applied consistently to the JASPER experiment analyses. In general, the results with JSSTDL analyses are higher than those by JSDJ2 as were found in analyses in last year for the Radial Shield Attenuation Experiment and the Special Materials Experiment. Consideration was made on the discrepancies between JSSTDL and JSDJ2 analysis results of the Axial Shield Experiment and also those of the sodium configulation in the Radial Shield Attenuation Experiment. The former was done by exchange of macro cross section of each region, and the latter forcused on sodium cross section was done with use of cross section sensitivity analysis method. Compilation of the input data necessary for future reanalyses of important configurations in JASPER experiments, that were selected in previous study in last year, were continued and new data were added into the computer disk holding previous ones.
Nuclear Data for Science and Technology, p.232 - 234, 1992/00
no abstracts in English