Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakayama, Yuta*; Ogawa, Fumio*; Hiyoshi, Noritake*; Hashidate, Ryuta; Wakai, Takashi; Ito, Takamoto*
ISIJ International, 61(8), p.2299 - 2304, 2021/08
Times Cited Count：0 Percentile：0(Metallurgy & Metallurgical Engineering)This study discusses the creep-fatigue strength for Mod.9Cr-1Mo steel at a high temperature under multiaxial loading. A low-cycle fatigue tests in various strain waveforms were performed with a hollow cylindrical specimen. The low cycle fatigue test was conducted under a proportional loading with a fixed axial strain and a non-proportional loading with a 90-degree phase difference between axial and shear strains. The low cycle fatigue tests at different strain rates and the creep-fatigue tests at different holding times were also conducted to discuss the effects of stress relaxation and strain holding on the failure life. In this study, two types of multiaxial creep-fatigue life evaluation methods were proposed: the first method is to calculate the strain range using Manson's universal slope method with considering a non-proportional loading factor and creep damage; the second method is to calculate the fatigue damage by considering the non-proportional loading factor using the linear damage law and to calculate the creep damage from the improved ductility exhaustion law. The accuracy of the evaluation methods is much better than that of the methods used in the evaluation of actual machines such as time fraction rule.
Saito, Kimiaki; Nagai, Haruyasu; Kinase, Sakae; Takemiya, Hiroshi
Nihon Genshiryoku Gakkai-Shi ATOMO
, 59(6), p.40 - 44, 2017/06
no abstracts in English
Ioka, Ikuo; Miwa, Yukio; Tsuji, Hirokazu; Yonekawa, Minoru; Takada, Fumiki; Hoshiya, Taiji
JSME International Journal, Series A, 45(1), p.51 - 56, 2002/01
The low cycle creep-fatigue test with tensile strain hold of the austenitic stainless steel irradiated to 2dpa was carried out at 823K in vacuum. The applicability of creep-fatigue life prediction methods to the irradiated specimen was examined. The fatigue life on the irradiated specimen without tensile strain hold time was reduced by a factor of 2-5 in comparison with the unirradiated specimen. The fraction of intergranular fracture increased with increasing strain hold time. The decline in fatigue life of the irradiated specimen with tensile strain hold was almost equal to that of the unirradiated specimen. For the irradiated specimen, the time fraction damage rule trends to yield unsafe estimated lives and the ductility exhaustion damage rule trends to yield generous results. However, all of data were predicted within a factor of three on life by the linear damage rule.
Kurata, Yuji; Nakajima, Hajime
Journal of Nuclear Science and Technology, 32(6), p.539 - 546, 1995/06
Times Cited Count：6 Percentile：55.97(Nuclear Science & Technology)no abstracts in English
