JOPSS - Search Results

Journal Articles

Anisotropic creep property related to non-spherical shape of mechanically alloyed powder of oxide dispersion strengthened F82H

Sakasegawa, Hideo; Nakajima, Motoki*; Kato, Taichiro*; Nozawa, Takashi*; Ando, Masami*

Materials Today Communications (Internet), 40, p.109659_1 - 109659_8, 2024/08

https://doi.org/10.1016/j.mtcomm.2024.109659

Times Cited Count：1 Percentile：48.91(Materials Science, Multidisciplinary)

Nanometric oxide particles play an important role in improving the creep property of Oxide Dispersion Strengthened (ODS) steels. In our previous research, we examined a microstructural feature known as prior particle boundary (PPB). PPB refers to the surface of mechanically alloyed (MA) powders before consolidation. We revealed that the ODS steel with fine PPBs produced from smaller MA powders, exhibited shorter creep rupture times, compared to that with coarse PPBs produced from larger MA powders. The size of MA powders had an impact on the creep property. In this study, we examined the shape of MA powders, which were non-spherical shapes. Such shapes have the potential to induce anisotropic creep behavior. We conducted small punch creep tests on specimens with two different orientations to study the possible anisotropy. The results revealed that the creep rupture times varied depending on the orientation of specimen, thus indicating anisotropic creep property.

Journal Articles

Effect of thermo-mechanical treatments on nano-structure of 9Cr-ODS steel

Oka, Hiroshi; Tanno, Takashi; Otsuka, Satoshi; Yano, Yasuhide; Uwaba, Tomoyuki; Kaito, Takeji; Onuma, Masato*

Nuclear Materials and Energy (Internet), 9, p.346 - 352, 2016/12

https://doi.org/10.1016/j.nme.2016.10.007

Times Cited Count：22 Percentile：87.41(Nuclear Science & Technology)

Journal Articles

Mechanical properties of weldments using irradiated stainless steel welded by the laser method for ITER blanket replacement

Yamada, Hirokazu*; Kawamura, Hiroshi; Nagao, Yoshiharu; Takada, Fumiki; Kono, Wataru*

Journal of Nuclear Materials, 355(1-3), p.119 - 123, 2006/09

https://doi.org/10.1016/j.jnucmat.2006.04.010

Times Cited Count：5 Percentile：35.46(Materials Science, Multidisciplinary)

In this study, the bending properties of welding joint of irradiated material and un-irradiated material (irradiated/un-irradiated joints) were investigated using SS316LN-IG, which is the candidate material for the cooling pipe of ITER. The results of this study showed that the bending position of joints using un-irradiated material was un-irradiated part and that the bending position of irradiated/irradiated joints was fusion area or HAZ (heat affected zone). Although the bending position of joints was different bor the combination pattern between irradiated and un-irradiated materials, the bending strength of joint was almost same. Additionally, it is confirmed that bending strength did not depend on the combination pattern between the irradiated and un-irradiated materials, nor on the relationship between the heat input direction and the bending load direction.

Journal Articles

Radiation damage effects in superplastic 3Y-TZP irradiated with Zr ions

Motohashi, Yoshinobu*; Kobayashi, Tomokazu*; Harjo, S.*; Sakuma, Takaaki*; Shibata, Taiju; Ishihara, Masahiro; Baba, Shinichi; Hoshiya, Taiji

Nuclear Instruments and Methods in Physics Research B, 206, p.144 - 147, 2003/05

https://doi.org/10.1016/S0168-583X(03)00702-X

Times Cited Count：4 Percentile：33.44(Instruments & Instrumentation)

The 3mol% yttria containing tetragonal zirconia polycrystals(3Y-TZP) were irradiated using 130MeV Zr $^{11+}$ ions in the TANDEM accelerator facility at Tokai Research Establishment, JAERI. Irradiation was performed with the fluence of 3.510 $^{16}$ and 2.110 $^{17}$ ions/m $^{2}$ . Residual stress and changes in mechanical properties caused by the ion irradiation and the effects of the subsequent annealing are studied. The occurrence of compressive residual stresses and increases in hardness and fracture toughness were found at the surface regions of as-irradiated specimens. It was found from the subsequent annealing that these quantities decreased gradually with raising the annealing temperature and returned to that of un-irradiated state at around 1173K. A most probable cause of the increases in the hardness and fracture toughness after the irradiation may, therefore, be the residual compressive stresses left in the irradiated surface region.

JAEA Reports

Basic design of shield blocks for a spallation neutron source under the high-intensity proton accelerator project

Yoshida, Katsuhiko*; Maekawa, Fujio; Takada, Hiroshi

JAERI-Tech 2003-019, 52 Pages, 2003/03

JAERI-Tech-2003-019.pdf:2.89MB

Under the JAERI-KEK High-Intensity Proton Accelerator Project (J-PARC), a spallation neutron source driven by a 3 GeV-1MW proton beam is planed to be constructed as a main part of the Materials and Life Science Facility. Overall dimensions of a biological shield of the neutron source had been determined by evaluation of shielding performance by Monte Carlo calculations. This report describes results of design studies on an optimum dividing scheme in terms of cost and treatment and mechanical strength of shield blocks for the biological shield. As for mechanical strength, it was studied whether the shield blocks would be stable, fall down or move to a horizontal direction in case of an earthquake of seismic intensity of 5.5 (250 Gal) as an abnormal load. For ceiling shielding blocks being supported by both ends of the long blocks, maximum bending moment and an amount of maximum deflection of their center were evaluated.

Journal Articles