Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Brear, D. J.*; Kondo, Satoru; Sogabe, Joji; Tobita, Yoshiharu*; Kamiyama, Kenji
JAEA-Research 2024-009, 134 Pages, 2024/10
JAEA-Research-2024-009.pdf:2.45MB
The SIMMER-III/SIMMER-IV computer codes are being used for liquid-metal fast reactor (LMFR) core disruptive accident (CDA) analysis. The sequence of events predicted in a CDA is often influenced by the heat exchanges between LMFR materials, which are controlled by heat transfer coefficients (HTCs) in the respective materials. The mass transfer processes of melting and freezing, and vaporization and condensation are also controlled by HTCs. The complexities in determining HTCs in a multi-component and multi-phase system are the number of HTCs to be defined at binary contact areas of a fluid with other fluids and structure surfaces, and the modes of heat transfer taking into account different flow topologies representing flow regimes with and without structure. As a result, dozens of HTCs are evaluated in each mesh cell for the heat and mass transfer calculations. This report describes the role of HTCs in SIMMER-III/SIMMER-IV, the heat transfer correlations implemented and the calculation of HTCs in all topologies in multi-component, multi-phase flows. A complete description of the physical basis of HTCs and available experimental correlations is contained in Appendices to this report. The major achievement of the code assessment program conducted in parallel with code development is summarized with respect to HTC modeling to demonstrate that the coding is reliable and that the model is applicable to various multi-phase problems with and without reactor materials.
Kurihara, Ryoichi
Fusion Engineering and Design, 61-62, p.209 - 216, 2002/11
Times Cited Count：4 Percentile：28.66(Nuclear Science & Technology)To attain high fusion power density, the divertor must suffer high heat flux from the fusion plasma. It is very difficult to remove a high heat flux more than 20 MW/m
using the only solid divertor plate from the viewpoint of severe mechanical state such as thermal stress and crack growth. Therefore, a concept of liquid divertor is proposed to remove high heat flux by liquid films flowing on a solid wall. This paper mainly descries a preliminary thermofluid analysis of the free surface liquid flow, made of the FliBe molten salt, using the finite element analysis code ADINA-F. The heat flux of 25
100 MW/m was given on the free surface liquid of the flow. I explored a possibility of applying the secondary flow to enhance the heat transfer of the liquid flow suffering high heat flux. This analysis shows that the heat flux of 100 MW/m can be removed by inducing the secondary flow in the free surface liquid FLiBe. And this paper shows that the liquid divertor using solid-liquid multi-phase flow makes possible large heat removal by utilizing the latent heat of fusion of solid phase.
Utsumi, Takayuki*; Sasaki, Akira; Kunugi, Tomoaki*; Fujii, Sadao*; Akamatsu, Mikio*
Proceedings of 13th International Conference on High-Power Particle Beams (BEAMS 2000) (CD-ROM), 4 Pages, 2000/00
no abstracts in English
Murao, Yoshio
Konsoryu, 11(3), p.203 - 204, 1997/00
no abstracts in English
