JOPSS - Search Results

JAEA Reports

Technical note for the cavitation damage inspection for interior surface of the mercury target vessel, 1; Development of specimen cutting machine for remote handling

Naoe, Takashi; Kinoshita, Hidetaka; Wakui, Takashi; Kogawa, Hiroyuki; Haga, Katsuhiro

JAEA-Technology 2022-018, 43 Pages, 2022/08

JAEA-Technology-2022-018.pdf:7.84MB

In the liquid mercury target system for the pulsed spallation neutron source of Materials and Life science experimental Facility (MLF) at the Japan in the Japan Proton Accelerator Research Complex (J-PARC), cavitation that is generated by the high-energy proton beam-induced pressure waves, resulting severe erosion damage on the interior surface of the mercury target vessel. The erosion damage is increased with increasing the proton beam power, and has the possibility to cause the leakage of mercury by the penetrated damage and/or the fatigue failure originated from erosion pits during operation. To achieve the long term stable operation under high-power proton beam, the mitigation technologies for cavitation erosion consisting of surface modification on the vessel interior surface, helium gas microbubble injection, double-walled beam window structure has been applied. The damage on interior surface of the vessel is never observed during the beam operation. Therefore, after the target operation term ends, we have cut out specimen from the target nose of the target vessel to inspect damaged surface in detail for verification of the cavitation damage mitigation technologies and lifetime estimation. We have developed the techniques of specimen cutting out by remote handling under high-radiation environment. Cutting method was gradually updated based on experience in actual cutting for the used target vessel. In this report, techniques of specimen cutting out for the beam entrance portion of the target vessel in high-radiation environment and overview of the results of specimen cutting from actual target vessels are described.

JAEA Reports

Failure probability analysis on mercury target vessel

Ishikura, Shuichi*; Shiga, Akio*; Futakawa, Masatoshi; Kogawa, Hiroyuki; Sato, Hiroshi; Haga, Katsuhiro; Ikeda, Yujiro

JAERI-Tech 2005-026, 65 Pages, 2005/03

JAERI-Tech-2005-026.pdf:2.86MB

Failure probability analysis was carried out to estimate the lifetime of the mercury target which will be installed into the JSNS (Japan spallation neutron source) in J-PARC (Japan Proton Accelerator Research Complex). The lifetime was estimated as taking loading condition and materials degradation into account. Considered loads imposed on the target vessel were the static stresses due to thermal expansion and static pre-pressure on He-gas and mercury and the dynamic stresses due to the thermally shocked pressure waves generated repeatedly at 25 Hz. Materials used in target vessel will be degraded by the fatigue, neutron and proton irradiation, mercury immersion and pitting damages, etc. The imposed stresses were evaluated through static and dynamic structural analyses. The material-degradations were deduced based on published experimental data. As results, it was quantitatively confirmed that the failure probability for the lifetime expected in the design is very much lower, 10 $^{-11}$ in the safety hull, meaning that it will be hardly failed during the design lifetime. On the other hand, the beam window of mercury vessel suffered with high-pressure waves exhibits the failure probability of 12%. It was concluded, therefore, that the leaked mercury from the failed area at the beam window is adequately kept in the space between the safety hull and the mercury vessel to detect mercury-leakage sensors.

Journal Articles

Present status of the liquid lithium target facility in the international fusion materials irradiation facility (IFMIF)

Nakamura, Hiroo; Riccardi, B.*; Loginov, N.*; Ara, Kuniaki*; Burgazzi, L.*; Cevolani, S.*; Dell'Ocro, G.*; Fazio, C.*; Giusti, D.*; Horiike, Hiroshi*; et al.

Journal of Nuclear Materials, 329-333(1), p.202 - 207, 2004/08

https://doi.org/10.1016/j.jnucmat.2004.04.013

Times Cited Count：14 Percentile：65.28(Materials Science, Multidisciplinary)

International Fusion Materials Irradiation Facility (IFMIF), being developed by EU, JA, RF and US, is a deuteron-lithium (Li) reaction neutron source for fusion materials testing. In the end of 2002, 3 year Key Element technology Phase (KEP) to reduce the key technology risk factors has been completed. This paper describes these KEP tasks results. To evaluate Li flow characteristics, a water and Li flow experiments have been done. To develop Li purification system, evaluation of nitrogen and tritium gettering materials have been done. Conceptual design of remote handling and basic experiment have been donde. In addition, safety analysis and diganostics design have been done. In the presentation, the latest design and future prospects will be also summarized.

Journal Articles

Effects of neutron irradiation on some superplastic characteristics of tetragonal zirconia polycrystals containing 3 mol% yttria

Shibata, Taiju; Ishihara, Masahiro; Motohashi, Yoshinobu*; Ito, Tsutomu*; Baba, Shinichi; Kikuchi, Makoto*

Materials Transactions, 45(8), p.2580 - 2583, 2004/08

https://doi.org/10.2320/matertrans.45.2580

Times Cited Count：3 Percentile：26.39(Materials Science, Multidisciplinary)

Fast neutrons (energy 1.610 $^{23}$ J) were irradiated to tetragonal zirconia polycrystals containing 3 mol% yttria (3Y-TZP) at the fluence levels of 2.510 $^{24}$ (Light irradiation) and 4.310 $^{24}$ (Heavy irradiation) m $^{-2}$ . The irradiation caused no significant swelling in the 3Y-TZP specimens. After the neutron irradiation, superplastic characteristics were examined by tensile tests at a temperature range from 1623 to 1773 K with initial strain rates ranging from 5.010 $^{-4}$ to 1.6710 $^{-2}$ s $^{-1}$ . It was found that the elongation to fracture of the irradiated specimens was quite small in comparison with the unirradiated ones. The apparent activation energy for the superplastic flow of the irradiated 3Y-TZP was fairly high, i.e., 781 and 693 kJ・mol $^{-1}$ for Light and Heavy irradiations, respectively. Atomic displacement damages and defects in the 3Y-TZP caused by the irradiation were thought to be main causes of these property changes.

JAEA Reports

Estimation of tritium permeation through reduced-activation ferritic steel at IFMIF target backwall damaged by neutron irradiation

Matsuhiro, Kenjiro; Ando, Masami; Nakamura, Hiroo; Takeuchi, Hiroshi

JAERI-Research 2004-003, 12 Pages, 2004/03

JAERI-Research-2004-003.pdf:0.85MB

The effect of neutron irradiation damage on tritium permeation through reduced-activation ferritic steel (F82H) at IFMIF target backwall has been estimated. From the results, it has been found that the effective diffusion coefficient of hydrogen in F82H will decrease by 10 % to 20 % under neutron irradiation. Therefore, the amount of tritium permeation for several hundred seconds at the beginning of permeation will be smaller than 80 % to 90 % of that before neutron irradiation. The amount of tritium permeation of F82H at IFMIF target backwall is 1.3x10 $^{-11}$ g/d (4.7x10 $^{3}$ Bq/d). It is 30 times larger than that of 316SS, and is about 8 % of tritium permeation at main loop of IFMIF.