Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Oizumi, Akito; Akie, Hiroshi
JAEA-Technology 2023-017, 93 Pages, 2023/12
JAEA-Technology-2023-017.pdf:8.45MB
After the decision of decommissioning JMTR (Japan Materials Testing Reactor), Japan Atomic Energy Agency investigated the possibility to construct a new irradiation test reactor to succeed JMTR (post-JMTR), and the final report of the investigated result was submitted to the Ministry of Education, Culture, Sports, Science and Technology on March 30th 2021. This investigation was carried out in 4 steps of (1) selection of reactor type, (2) reactor core plans studies, (3) neutronic studies, (4) thermal studies, and was finally (5) considered and evaluated. This JAEA-Technology report summarizes the process and the results of (3) neutronic studies. Neutron fluxes were calculated at irradiation sample positions in the investigated cores, the standard core and the compact core, and the calculated fluxes satisfied the required irradiation capability. It was also evaluated the two investigated cores' continuous reactor operation time in days in one refueling cycle, and the results guaranteed an operation days equality with that of existing JMTR. In addition, neutronic characteristics of the cores were estimated, such as power distribution in the core, control rod reactivity worth, reactivity coefficients, distribution of fuel burnup rate of each fuel element, and kinetics parameters. The evaluated neutronic characteristics were used in the post-JMTR final investigation report to confirm the neutronic feasibility by comparing with the neutronic limiting values of existing JMTR, and to estimate the cooling capability to make the core thermally feasible.
Takino, Kazuo; Oki, Shigeo
JAEA-Data/Code 2023-003, 26 Pages, 2023/05
JAEA-Data-Code-2023-003.pdf:1.66MB
Since next-generation fast reactors aim to achieve a higher core discharge burn-up than conventional reactors do, core neutronics design methods must be refined. Therefore, a suitable analysis condition is required for the analysis of burn-up nuclear characteristics to accomplish sufficient estimation accuracy while maintaining a low computational cost. We investigated the effect of the analysis conditions on the accuracy of estimation of the burn-up nuclear characteristics of next-generation fast reactors in terms of neutron energy groups, neutron transport theory, and spatial mesh. This study treated the following burn-up nuclear characteristics: criticality, burn-up reactivity, control rod worth, breeding ratio, assembly-wise power distribution, maximum linear heat rate, sodium void reactivity, and Doppler coefficient for the equilibrium operation cycle. As a result, it was found that the following conditions were the most suitable: 18-energy-group structure, 6 spatial meshes per assembly with diffusion approximation. Additionally, these conditions should apply to correction factors for energy group structure, spatial mesh and transport effects.
Harada, Masahide; Watanabe, Noboru; Teshigawara, Makoto; Kai, Tetsuya; Maekawa, Fujio; Kato, Takashi; Ikeda, Yujiro
LA-UR-06-3904, Vol.2, p.700 - 709, 2006/06
Pulse characteristics data for every neutron beam line are indispensable in designing devices for neutron scattering experiments of JSNS. A detailed model was built and pulse characteristics of each beam line were estimated using the PHITS code and the MCNP-4C code. These results have been disclosed on the J-PARC homepage since September 2004. Due to changes of moderator shapes in a progress of manufacture design, we observed from the calculation that pulse structures of decoupled moderators were deteriorated, especially, those of pulse tail. We found that this deterioration was caused by leakage neutron from gaps between decouplers and absorbing liners of the reflector. For a final stage of the manufacture design, we carefully tried to find other factors which deteriorated the pulse characteristics. Furthermore, pulse structures of poisoned and unpoisoned decoupled moderators were evaluated with the consideration of heterogeneous burn-up and leakage neutron spectra including high-energy region up to GeV were estimated for each neutron beam hole.
Harada, Masahide; Teshigawara, Makoto; Kai, Tetsuya; Sakata, Hideaki*; Watanabe, Noboru; Ikeda, Yujiro
Journal of Nuclear Science and Technology, 39(8), p.827 - 837, 2002/08
Times Cited Count：19 Percentile：73.92(Nuclear Science & Technology)For a decoupled hydrogen (super critical) moderator, optimization studies have been performed on a premoderator and reflector material (Pb, Be, Fe and Hg) together with the decoupling energy to realize a higher neutronic performance. The result indicated that the best neutronic performance could be obtained for a decoupled H
moderator in a Pb reflector by optimizing the premoderator and adopting an appropriate decoupling energy, even compared with optimized one in a Be reflector.
Nagaoka, Yoshiharu; Komukai, Bunsaku; ; Koike, Sumio; Saito, Minoru;
JAERI-M 92-098, 81 Pages, 1992/07
no abstracts in English
