Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Togawa, Orihiko; Okura, Takehisa; Kimura, Masanori
JAEA-Review 2022-049, 76 Pages, 2023/01
Before construction and after operation of nuclear facilities, environmental consequence assessments are conducted for normal operation and an emergency. These assessments mainly aim at confirming safety for the public around the facilities and producing relief for them. Environmental consequence assessments are carried out using observations/ measurements by environmental monitoring and/or model predictions by calculation models, sometimes using either of which and at other times using both them, according to the situations and necessities. First, this report investigates methods, roles, merits/demerits and relationship between observations/measurements and model predictions which are used for environmental consequence assessments of nuclear facilities, especially holding up a spent nuclear fuel reprocessing plant at Rokkasho, Aomori as an example. Next, it explains representative examples of utilization of data on observations/measurements and results on model predictions, and considers points of attention at using them. Finally, the report describes future direction, for example, improvements of observations/measurements and model predictions, and fusion of both them.
Iijima, Shizuka; Uchida, Naoki; Taguchi, Katsuya; Washiya, Tadahiro
JAEA-Review 2015-018, 39 Pages, 2015/11
There is a possibility that the fuel assemblies stored in the spent fuel pool (SFP) at Fukushima Daiichi NPS (or Nuclear Power Station) are not only exposed to seawater and concrete fragments, but also damaged by fallen rubbles. We checked the reprocessing experiences of leak fuels at Tokai Reprocessing Plant and overseas reprocessing facilities, and the storage conditions and the checked and inspected results of the fuel stored in the SFP at Fukushima Daiichi NPS, after that, we listed up the technological problems with reprocessing damaged nuclear fuels and selected elements of the research for the purpose of drawing indicators to make a judgmental decision of the possibility of damaged nuclear fuels reprocessing. And we drew the indicators to make a judgmental decision on the possibility of reprocessing based on the results of the examination and the study about elements of the research.
Nakajima, Ken*; Itahara, Kuniyuki*; Okuno, Hiroshi
Proceedings of International Conference on Nuclear Criticality Safety (ICNC 2015) (DVD-ROM), p.496 - 502, 2015/09
An outline of the standard "Procedures for Applying Burnup Credit to Criticality Safety Control of a Reprocessing Facility: 2014" (AESJ-SC-F025: 2014) published in April 2015 by the Atomic Energy Society of Japan (AESJ) is presented. The AESJ published more than 60 Standards. However, many of them were in the field of nuclear power reactors or radioactive wastes. Ten years ago the AESJ published "Basic Items of Criticality Safety Control: 2004" (AESJ-SC-F004:2004), which prescribed basic ideas, requirements and methods on nuclear criticality safety controls of facilities handling with nuclear fuel materials in general for preventing a nuclear criticality accident. However, it did not include any specific procedures for adopting burnup credit. Therefore, a new standard was envisaged as the first Standard for fuel reprocessing plants, which clarified the specific procedures to apply burnup credit to designers, operators, maintenance persons and administrators.
Otaki, Kiyoshi*; Tanaka, Yoji*; Katsurai, Kiyomichi*; Aoki, Kazuo*
JAERI-Review 2005-035, 79 Pages, 2005/09
In order to collect technical information for the assessment on future nuclear power reactors and fuel cycle systems in Japan, investigation has been made on the characteristics and performance of future reactor options including reduced moderation water reactors (RMWRs) and their fuel cycle systems since the fiscal year 1998. The subjects of investigation are divided into three categories; breeder reactors and their fuel cycle, alternative to sodium-cooled FBR systems,plutonium recycling, spent fuel reprocessing and waste disposal. This report is a summary of the investigation carried out so far.
Watanabe, Koji; Tashiro, Shinsuke; Abe, Hitoshi; Takada, Junichi; Morita, Yasuji
JAERI-Tech 2004-029, 48 Pages, 2004/03
In a part of building ventilating installation of a nuclear fuel facility, a reprocessing plant for example, the pre-filters are adopted as one of the ventilation filters. In a fire accident, it is supposed that, because of the pre-filter clogging by large smoke, its differential pressure (
p) is evolved up to the value at its breakage. Therefore, in regard to maintaining the confinement of radioactive materials, it is important to predict the time course of
p of the pre-filter accurately. In the current study, it was assumed that the empirical equation for the DF of the pre-filter as function of smoke particle diameter (SPD), between 0.7-2
m, could be applied to estimating its DF for SPD above 2
m. Under this assumption, the time corresponding to its
p at its breakage, calculated by CELVA-1D, was agreed well with the experimental result.
Kato, Chiaki
JAERI-Research 2003-013, 143 Pages, 2003/08
This study is investigation about stress corrosion cracking (SCC) of zirconium in nuclear fuel reprocessing. Chapter 1 is described background. Chapter 2 is explained experimental apparates. Chapter 3 is described the increased oxidization potential on the heat-transfer surface and suggested the initiation of SCC on a boiling heat-transfer surface. Chapter 4 is described that the SCC susceptibility increased with increasing nitric acid concentration and solution temperature on notched specimen by SSRT. In addition, the SCC susceptibility effected by the crystal anisotropy by the hot rolling direction and increased on a parallel face to the rolling direction. Chapter 5 is described that the SCC susceptibility increased in HAZ/base metal boundary in order to the preferential orientation of cleavage plane (0002). Chapter 6 is described that the increased oxidization potential on the heat-transfer surface is attributed to the reduction of nitrous acid concentration by the thermal decomposition on the surface and the removal of the decomposition product from solution by boiling bubbles.
NUCEF 2001 Symposium Working Group
JAERI-Conf 2002-004, 714 Pages, 2002/03
This volume contains 94 papers presented at the 3rd NUCEF International Symposium NUCEF 2001 held on October 31 - November 2, 2001, in Tokai, Japan, following the 1st symposium NUCEF'95 (Proceedings: JAERI-Conf 96-003) and the 2nd symposium NUCEF'98 (Proceedings: JAERI-Conf 99-004). The theme of this symposium was " Scientific Basis for Criticality Safety, Separation Process and Waste Disposal". The papers were presented in oral and poster sessions on following research fields: (1) Separation Process, (2) TRU Chemistry, (3) Radioactive Waste Disposal, (4) Criticality Safety.
Kobayashi, Takuya; Lee, S.; Chino, Masamichi
Journal of Nuclear Science and Technology, 39(2), p.171 - 179, 2002/02
Times Cited Count:3 Percentile:22.50(Nuclear Science & Technology)A three-dimensional model system was developed to predict oceanic dispersions of radionuclides released into the eastern area of Shimokita Peninsula. This system is a combination of the Princeton Ocean Model (POM) for predicting ocean currents and a particle random walk model for oceanic dispersion of radionuclides. The model was verified by using measured currents, temperature and salinity at the coastal area of Shimokita, Aomori-ken, Japan, where a nuclear fuel reprocessing plant is under construction. The results obtained from simulations area as follows; (1) Wind and the Tsugaru Warm Current entering into the objective region through the Tsugaru Strait significantly affect the structure of current over the region. (2) POM can represent seasonal variations of the Tsugaru Warm Current well with hypothetical oceanographic data. The calculation succeeded to reproduce the coastal mode from winter to spring and the gyre mode from summer to autumn.
Tachimori, Shoichi
JAERI-Research 2001-048, 23 Pages, 2001/10
A new chemical process, ARTIST process, is proposed for the treatment of spent nuclear fuel. The main concept of the ARTIST process is to recover and stock all actinides (Ans) in two groups, uranium (U) and a mixture of transuranics (TRU), to preserve their resource value and to dispose solely fission products (FPs). The process composed of two main steps, an U exclusive isolation and a total recovery of TRU; which copes with the nuclear non-proliferation measures, and additionally Pu separation process and soft N-donor process if requested, and optionally processes for separation of long-lived FPs. These An products: U-product and TRU-product, are to be solidified by calcination and allowed to the interim stockpile for future utilization. These separations are achieved by use of amidic extractants in accord with the CHON principle. The technical feasibility of the ARTIST process was explained by the performance of both the branched-alkyl monoamides the diglycolic amide (TODGA) in thorough extraction of all TRU by tridentate fashon.
Department of Decommissioning and Waste Management
JAERI-Review 2000-013, 49 Pages, 2000/09
no abstracts in English
JAERI-Conf 99-004, 712 Pages, 1999/03
no abstracts in English
Togawa, Orihiko
Journal of Nuclear Science and Technology, 33(10), p.792 - 803, 1996/10
Times Cited Count:3 Percentile:32.75(Nuclear Science & Technology)no abstracts in English
Tonoike, Kotaro; Izawa, Naoki; Okazaki, Shuji; Sugikawa, Susumu; Takeshita, Isao;
ICNC 95: 5th Int. Conf. on Nuclear Criticality Safety,Vol. II, 0, p.10.25 - 10.32, 1995/00
no abstracts in English
Shindo, Ryuichi
Enerugi, Shigen, 14(5), p.419 - 423, 1993/00
no abstracts in English
Proc. of the 3rd Int. Conf. on Nuclear Fuel Reprocessing and Waste Management,Vol. 1, p.189 - 194, 1991/00
no abstracts in English