Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakasegawa, Hideo; Nakajima, Motoki*; Kato, Taichiro*; Nozawa, Takashi*; Ando, Masami*
Materials Today Communications (Internet), 40, p.109659_1 - 109659_8, 2024/08
Times Cited Count：1 Percentile：17.44(Materials Science, Multidisciplinary)Nanometric oxide particles play an important role in improving the creep property of Oxide Dispersion Strengthened (ODS) steels. In our previous research, we examined a microstructural feature known as prior particle boundary (PPB). PPB refers to the surface of mechanically alloyed (MA) powders before consolidation. We revealed that the ODS steel with fine PPBs produced from smaller MA powders, exhibited shorter creep rupture times, compared to that with coarse PPBs produced from larger MA powders. The size of MA powders had an impact on the creep property. In this study, we examined the shape of MA powders, which were non-spherical shapes. Such shapes have the potential to induce anisotropic creep behavior. We conducted small punch creep tests on specimens with two different orientations to study the possible anisotropy. The results revealed that the creep rupture times varied depending on the orientation of specimen, thus indicating anisotropic creep property.
Miyazawa, Takeshi; Tanno, Takashi; Imagawa, Yuya; Hashidate, Ryuta; Yano, Yasuhide; Kaito, Takeji; Otsuka, Satoshi; Mitsuhara, Masatoshi*; Toyama, Takeshi*; Onuma, Masato*; et al.
Journal of Nuclear Materials, 593, p.155008_1 - 155008_16, 2024/05
Times Cited Count：2 Percentile：37.73(Materials Science, Multidisciplinary)Yamashita, Shinichiro; Nagase, Fumihisa; Kurata, Masaki; Nozawa, Takashi; Watanabe, Seiichi*; Kirimura, Kazuki*; Kakiuchi, Kazuo*; Kondo, Takao*; Sakamoto, Kan*; Kusagaya, Kazuyuki*; et al.
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 10 Pages, 2017/09
In Japan, the research and development (R&D) project on accident tolerant fuel and other components (ATFs) of light water reactors (LWRs) has been initiated in 2015 for establishing technical basis of ATFs. The Japan Atomic Energy Agency (JAEA) has coordinated and carried out this ATF R&D project in cooperation with power plant providers, fuel venders and universities for making the best use of the experiences, knowledges in commercial uses of zirconium-base alloys (Zircaloy) in LWRs. ATF candidate materials under consideration in the project are FeCrAl steel strengthened by dispersion of fine oxide particles(FeCrAl-ODS) and silicon carbide (SiC) composite, and are expecting to endure severe accident conditions in the reactor core for a longer period of time than the Zircaloy while maintaining or improving fuel performance during normal operations. In this paper, the progresses of the R&D project are reported.
Sakamoto, Kan*; Hirai, Mutsumi*; Ukai, Shigeharu*; Kimura, Akihiko*; Yamaji, Akifumi*; Kusagaya, Kazuyuki*; Kondo, Takao*; Yamashita, Shinichiro
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 7 Pages, 2017/09
This paper will show the overview of current status of development of accident tolerant FeCrAl-ODS fuel claddings for BWRs (boiling water reactors) in the program sponsored and organized by the Ministry of Economy, Trade and Industry (METI) of Japan. This program is being carried out to create the technical basis for the practical use of the accident tolerant fuels and the other components in LWRs through multifaceted activities. In the development of FeCrAl-ODS fuel claddings both the experimental and the analytical studies have been performed. The acquisition and accumulation of key material properties of FeCrAl-ODS fuel claddings were conducted by using bar, sheet and tube shaped FeCrAl-ODS materials fabricated in this program to support the evaluations in the analytical studies. A neutron irradiation test was also started in the ORNL High Flux Isotope Reactor (HFIR) to examine the effect of neutron irradiation on the mechanical properties.
Asayama, Tai; Otsuka, Satoshi
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Next Generation Nuclear Systems for Sustainable Development (FR-17) (USB Flash Drive), 15 Pages, 2017/06
This paper summarizes ongoing efforts in Japan Atomic Energy Agency on the development of core and structural materials for sodium-cooled fast reactors. For core materials, oxide dispersion strengthened (ODS) steels and 11Cr ferritic steel (PNC-FMS) will be used for the fuel pin cladding and wrapper tube, respectively. As for ODS steel, 9Cr- and 11Cr-ODS steels have been extensively developed. Their laboratory-scale manufacturing technology has been developed including reliability improvement in tube microstructure and strength homogeneity. As for the PNC-FMS wrapper tube, the development of a dissimilar joining technique with type 316 steel and properties evaluation of dissimilar welds have been carried out. For structural materials, codification of 316FR stainless steel and Modified 9Cr-1Mo steel is ongoing. Acquisition and collection of long-term data of base metal and welded joints are continued and evaluation methodologies are being developed to establish a technical basis for 60-year design.
Aghamiri, M. S.*; Ukai, Shigeharu*; Ono, Naoko*; Hayashi, Shigenari*; Sowa, Takashi*; Sugawara, Naoya*; Sakamoto, Kan*; Yamashita, Shinichiro
no journal, ,
Both the grain structure and mechanical properties of the fuel cladding tubes are important issues to design the material for high temperature conditions and probable accident of nuclear reactor. In this study, we compared the microstructure and tensile properties of FeCrAl-ODS steels plates and cladding tubes in different extruded, recovered and recrystallized conditions and propose the material for the application.
