Detectability of pump/diagrid link rupture in pool-type sodium-cooled fast reactor

Onoda, Yuichi; Uchita, Masato*; Tokizaki, Minako*; Okazaki, Hitoshi*

Nuclear Technology, 211(11), p.2812 - 2831, 2025/11

https://doi.org/10.1080/00295450.2025.2462367

Seismic fragility evaluation of a thin-walled vessel in a sodium-cooled fast reactor

Watakabe, Tomoyoshi; Yamano, Hidemasa; Futagami, Satoshi

Transactions of the 28th International Conference on Structural Mechanics in Reactor Technology (SMiRT28) (Internet), 10 Pages, 2025/08

The fragility evaluation method of the RV in the SFR has been developed for both failure mode buckling and fatigue. The past studies showed the fragility using the RV of a loop-type SFR: radius R / thickness t is about 100. Recently, Japan Atomic Energy Agency together with Japanese industrial partners has been conducting a pool-type SFR design. The fragility of the pool-type RV has never been evaluated by the proposed method, which is based on the fatigue failure mode instead of the buckling. To investigate the basic behaviour of the pool-type RV under excessive seismic loading, this report investigated the fragility by using a simple cylindrical model with a wall thickness close to the design of the pool-type RV: R/t is 200, as the first trial.

A 3D particle-based simulation of heat and mass transfer behavior in the EAGLE ID1 in-pile test

Zhang, T.*; Morita, Koji*; Liu, X.*; Liu, W.*; Kamiyama, Kenji

Annals of Nuclear Energy, 179, p.109389_1 - 109389_10, 2022/12

https://doi.org/10.1016/j.anucene.2022.109389

Measurement of fragments of a wall-impinging liquid jet in a shallow pool

Horiguchi, Naoki; Yoshida, Hiroyuki; Kaneko, Akiko*; Abe, Yutaka*

Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 6 Pages, 2022/10

For safety evaluation of nuclear reactors in severe accidents, it is important to estimate physical quantities of fragments generated from the molten fuel jet, which falls in a pool and breaks up. The evaluation method has been developed for the behavior as liquid jet with hydrodynamic interaction including fuel coolant interaction (FCI). In case of a shallow pool assumed in ex-vessel, the molten fuel jet is assumed to behave as wall-impinging liquid jet and to form liquid film flow spreading on the floor with/without fragmentation. In our research, focusing on hydrodynamic interaction and the transient 3-dimensional spreading on the floor, we have developed the evaluation method by numerical simulation using the two-phase flow simulation code with interface tracking method (TPFIT) developed by JAEA and, the experimental method using the 3D-LIF method in liquid-liquid system for the validation data. In our previous studies, we investigated the wall-impinging liquid jet behavior with fragmentation and observed that the liquid film flow had some characteristic parts transiently. Since it indicates that the quantities change depending on the parts and affect the safety evaluation, it is important to measure the quantities of the fragments generated from each part. This paper explains the measurement of the physical quantities of the fragments generated from each part of the wall-impinging liquid jet in a shallow pool for the validation of the numerical simulation. We conducted an experiment with the 3D-LIF method and segmented the experimental data based on the fragmentation point over the liquid film flow using the dispersed phase tracking method, developed by JAEA. Then, we measured the diameter and amount of the fragments from the segmented experimental data and investigated their changing trend.

Development of dispersed phase tracking method for time-series 3-dimensional interface shape data

Horiguchi, Naoki; Yoshida, Hiroyuki; Yamamura, Sota*; Fujiwara, Kota*; Kaneko, Akiko*; Abe, Yutaka*

Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 14 Pages, 2022/03

A Comparative CFD exercise on bubble hydrodynamics using Euler-Euler and interface tracking approaches

Dehbi, A.*; Cheng, X.*; Liao, Y.*; Okagaki, Yuria; Pellegrini, M.*

Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 15 Pages, 2022/03

Analytical study on removal mechanisms of cesium aerosol from a noble gas bubble rising through liquid sodium pool, 2; Effects of particle size distribution and agglomeration in aerosols

Miyahara, Shinya*; Kawaguchi, Munemichi; Seino, Hiroshi; Atsumi, Takuto*; Uno, Masayoshi*

Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 6 Pages, 2021/08

https://doi.org/10.1115/ICONE28-63286

In a postulated accident of fuel pin failure of sodium cooled fast reactor, a fission product cesium will be released from the failed pin as an aerosol such as cesium iodide and/or cesium oxide together with a fission product noble gas such as xenon and krypton. As the result, the xenon and krypton released with cesium aerosol into the sodium coolant as bubbles have an influence on the removal of cesium aerosol by the sodium pool in a period of bubble rising to the pool surface. In this study, cesium aerosol removal behavior due to inertial deposition, sedimentation and diffusion from a noble gas bubble rising through liquid sodium pool was analyzed by a computer program which deals with the expansion and the deformation of the bubble together with the aerosol absorption considering the effects of particle size distribution and agglomeration in aerosols. In the analysis, initial bubble diameter, sodium pool depth and temperature, aerosol particle diameter and density, initial aerosol concentration in the bubble were changed as parameter, and the results for the sensitivities of these parameters on decontamination factor (DF) of cesium aerosol were compared with the results of the previous study in which the effects of particle size distribution and agglomeration in aerosols were not considered. From the results, it was concluded that the sensitivities of initial bubble diameter, the aerosol particle diameter and density to the DF became significant due to the inertial deposition of agglomerated aerosols. To validate these analysis results, the simulation experiments have been conducted using a simulant particles of cesium aerosol under the condition of room temperature in water pool and air bubble systems. The experimental results were compared with the analysis results calculated under the same condition.

Macrolayer formation model for prediction of critical heat flux in saturated and subcooled pool boiling

Ono, Ayako; Sakashita, Hiroto*; Yoshida, Hiroyuki

Heat Transfer Engineering, 42(21), p.1775 - 1788, 2021/00

https://doi.org/10.1080/01457632.2020.1826738

In this study, the macrolayer formation model is proposed to predict the critical heat flux in the saturated and subcooled pool boiling based on the macrolayer dryout model. This model concept is based on the results of the previous experiments. In the model, the nucleation site is assumed to distribute based on the Poisson distribution. Combining the proposed macrolayer formation model and macrolayer dryout model, the CHFs up to subcooling 40K were predicted and they are successfully good agreement with the experimental data. Moreover, the concept of the model was confirmed by the numerical simulation using the TPFIT.

Numerical simulation of liquid jet behavior in shallow pool by interface tracking method

Suzuki, Takayuki*; Yoshida, Hiroyuki; Horiguchi, Naoki; Yamamura, Sota*; Abe, Yutaka*

Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 7 Pages, 2020/08

https://doi.org/10.1115/ICONE2020-16213

Study on loss-of-cooling and loss-of-coolant accidents in spent fuel pool, 1; Overview

Kaji, Yoshiyuki; Nemoto, Yoshiyuki; Nagatake, Taku; Yoshida, Hiroyuki; Tojo, Masayuki*; Goto, Daisuke*; Nishimura, Satoshi*; Suzuki, Hiroaki*; Yamato, Masaaki*; Watanabe, Satoshi*

Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05

https://doi.org/10.1299/jsmeicone.2019.27.1343

In this research program, cladding oxidation model in SFP accident condition, and numerical simulation method to evaluate capability of spray cooling system which was deployed for spent fuel cooling during SFP accident, have been developed. These were introduced into the severe accident codes such as MAAP and SAMPSON, and SFP accident analyses were conducted. Analyses using Computational Fluid Dynamics (CFD) code were conducted as well for the comparison with SA code analyses and investigation of detail in the SFP accident. In addition, three-dimensional criticality analysis method was developed as well, and safer loading pattern of spent fuels in pool was investigated.