Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hironaka, Kota; Lee, J.; Koizumi, Mitsuo; Ito, Fumiaki*; Hori, Junichi*; Terada, Kazushi*; Sano, Tadafumi*
Nuclear Instruments and Methods in Physics Research A, 1054, p.168467_1 - 168467_5, 2023/09
Times Cited Count:2 Percentile:41.04(Instruments & Instrumentation)Komeda, Masao; Toh, Yosuke
Applied Radiation and Isotopes, 188, p.110391_1 - 110391_6, 2022/10
Times Cited Count:0 Percentile:0.00(Chemistry, Inorganic & Nuclear)Hashimoto, Shunsuke*; Nakajima, Kenji; Kikuchi, Tatsuya*; Kamazawa, Kazuya*; Shibata, Kaoru; Yamada, Takeshi*
Journal of Molecular Liquids, 342, p.117580_1 - 117580_8, 2021/11
Times Cited Count:3 Percentile:20.58(Chemistry, Physical)Quasi-elastic neutron scattering (QENS) and pulsed-field-gradient nuclear magnetic resonance (PFGNMR) analyses of a nanofluid composed of silicon dioxide (SiO) nanoparticles and a base fluid of ethylene glycol aqueous solution were performed. The aim was to elucidate the mechanism increase in the thermal conductivity of the nanofluid above its theoretical value. The obtained experimental results indicate that SiO particles may decrease the self-diffusion coefficient of the liquid molecules in the ethylene glycol aqueous solution because of their highly restricted motion around these nanoparticles. At a constant temperature, the thermal conductivity increases as the self-diffusion coefficient of the liquid molecules decreases in the SiO nanofluids.
Vu, TheDang; Shishido, Hiroaki*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; Miyajima, Shigeyuki*; et al.
Nuclear Instruments and Methods in Physics Research A, 1006, p.165411_1 - 165411_8, 2021/08
Times Cited Count:1 Percentile:15.62(Instruments & Instrumentation)Harada, Masahide; Teshigawara, Makoto; Oi, Motoki; Oikawa, Kenichi; Takada, Hiroshi; Ikeda, Yujiro
Nuclear Instruments and Methods in Physics Research A, 1000, p.165252_1 - 165252_8, 2021/06
Times Cited Count:3 Percentile:40.24(Instruments & Instrumentation)This study explores high-energy neutron components of the extracted neutron beam at J-PARC pulsed neutron source using the foil activation method with threshold reactions. Foils of aluminum, gold, bismuth, niobium, and thulium were used to cover the neutron energy range from 0.3 MeV to 79.4 MeV. The experiment was performed using neutron beams of BL10 (NOBORU). The foils were irradiated by a neutron beam at 13.4 m from the moderator. To characterize high-energy neutron fields for irradiation applications, reaction rates in three different configurations with and without BC slit and Pb filter were examined. To compare the experiments with calculations given for the user, reaction rates for corresponding reactions were calculated by the PHITS code with the JENDL-3.2 and the JENDL dosimetry file. Although there was a systematic tendency in C/E (Calculation/Experiment) ratios for different threshold energies, which C/E ratio decreased as threshold energy increased up to 100 MeV, and all C/E ratios were in the range of 1.00.2. This indicated that high-energy neutron calculations were adequate for the analysis of experimental data for NOBORU users.
Nakamura, Tatsuya; Kawasaki, Takuro; To, Kentaro; Harjo, S.; Sakasai, Kaoru; Aizawa, Kazuya
JPS Conference Proceedings (Internet), 33, p.011097_1 - 011097_6, 2021/03
A large area, two-dimensional scintillation neutron detector was developed for Takumi diffractometer in the J-PARC MLF. The detector is made based on a scintillator/wavelength shifting fiber technology. The detector has a neutron-sensitive area of 32 32 cm with a pixel size of 5 5 mm, which is about 1.5-fold larger than the SENJU detector TAKUMI is one of the neutron diffractometers in the MLF dedicated to use for engineering material research. The developed detector array adds new capabilities to the instrument to measure two-dimensional data collection at the back-scattering angles with a better time-of-flight resolution.
Vu, TheDang; Shishido, Hiroaki*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Oku, Takayuki; Soyama, Kazuhiko; Aizawa, Kazuya; et al.
Superconductor Science and Technology, 34(1), p.015010_1 - 015010_10, 2021/01
Times Cited Count:4 Percentile:29.17(Physics, Applied)Chiaveri, E.*; Aberle, O.*; Alcayne, V.*; Kimura, Atsushi; 124 of others*
EPJ Web of Conferences, 239, p.17001_1 - 17001_8, 2020/09
Times Cited Count:5 Percentile:93.36(Nuclear Science & Technology)Vu, TheDang; Nishimura, Kazuma*; Shishido, Hiroaki*; Harada, Masahide; Oikawa, Kenichi; Miyajima, Shigeyuki*; Hidaka, Mutsuo*; Oku, Takayuki; Soyama, Kazuhiko; Aizawa, Kazuya; et al.
Journal of Physics; Conference Series, 1590, p.012036_1 - 012036_9, 2020/07
Times Cited Count:1 Percentile:64.95(Engineering, Electrical & Electronic)Katano, Ryota; Yamanaka, Masao*; Pyeon, C. H.*
Journal of Nuclear Science and Technology, 57(2), p.169 - 176, 2020/02
Times Cited Count:4 Percentile:37.41(Nuclear Science & Technology)We proposed the linear combination method as a subcriticality measurement method which estimates the prompt neutron decay constant () correlated with the subcriticality using measurement results obtained at multiple detector positions. In the previous study, we confirmed applicability of the linear combination method through the pulsed neutron experiment with DT neutron source at Kyoto University Critical Assembly (KUCA). In this study, we conduct the pulsed neutron source experiment with spallation neutrons at KUCA and confirm the robustness of the linear combination to neutron sources.
Katano, Ryota; Yamanaka, Masao*; Pyeon, C. H.*
Nuclear Science and Engineering, 193(12), p.1394 - 1402, 2019/12
Times Cited Count:5 Percentile:44.57(Nuclear Science & Technology)The author proposed the linear combination method as a subcriticality measurement method which estimates the prompt neutron decay constant (alpha) correlated with the subcriticality using measurement results obtained at multiple detector positions. In this study, we conduct the pulsed neutron experiment at Kyoto University Critical Assembly (KUCA) and measure alpha by the linear combination method using measured neutron counts. Through experiment, we experimentally show that the linear combination method can reduce the higher-mode effect compared to the conventional method. In addition, experimentally show that the linear combination has capability of the different mode extraction.
Aso, Tomokazu; Tatsumoto, Hideki*; Otsu, Kiichi*; Kawakami, Yoshihiko*; Komori, Shinji*; Muto, Hideki*; Takada, Hiroshi
JAEA-Technology 2019-013, 77 Pages, 2019/09
At Materials and Life Science experimental Facility (MLF) of the Japan Proton Accelerator Research Complex (J-PARC), a 1-MW pulsed spallation neutron source is equipped with a cryogenic hydrogen system which circulates liquid hydrogen (20 K and 1.5 MPa) to convert high energy neutrons generated at a mercury target to cold neutrons at three moderators with removing nuclear heat of 3.8 kW deposited there. The cryogenic system includes an accumulator with a bellows structure in order to absorb pressure fluctuations generated by the nuclear heat deposition in the system. Welded inner bellows of the first accumulator was failured during operation, forcing us to improve the accumulator to have sufficient pressure resistance and longer life-time. We have developed elemental technologies for manufacturing welded bellows of the accumulator by a thick plate with high pressure resistance, succeeding to find optimum welding conditions. We fabricated a prototype bellows block and carried out an endurance test by adding a pressure change of 2 MPa repeatedly. As a result, the prototype bellows was successfully in use exceeding the design life of 10,000 times. Since distortions given during welding and assembling affect functionality and lifetime of the bellows, we set the levelness of each element of the bellows as within 0.1. The improved accumulator has already been in operation for about 25,000 hours as of January 2019, resulting that the number of strokes reached to 16,000. In July 2018, we demonstrated that the accumulator could suppress the pressure fluctuation generated by the 932 kW beam injection as designed. As current operational beam power is 500 kW, the current cryogenic hydrogen system could be applicable for stable operation at higher power in the future.
Ito, Daisuke*; Sato, Hirotaka*; Saito, Yasushi*; Parker, J. D.*; Shinohara, Takenao; Kai, Tetsuya
Journal of Visualization, 22(5), p.889 - 895, 2019/06
Times Cited Count:1 Percentile:6.77(Computer Science, Interdisciplinary Applications)Katano, Ryota
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 6 Pages, 2019/05
no abstracts in English
Katano, Ryota
Nuclear Science and Engineering, 193(4), p.431 - 439, 2019/04
Times Cited Count:6 Percentile:51.34(Nuclear Science & Technology)We proposed "linear combination method" to reduce the higher order mode effect on the prompt neutron decay constant measured by the pulsed neutron experiment. When the spatial higher order mode effect is taken into account, the time evolution of the neutron counts after the pulsed neutron injection is given by linear combination of multiple exponential functions. However, the measurement results by the conventional method include the systematic error derived from the higher order mode effect because the conventional method fit the neutron counts with a single exponential function. The proposed method extract the single exponential function of the fundamental mode by linear combination of the neutron counts at multiple detectors, thus the proposed method reduces the higher order mode effect. As the verification, we applied the proposed method to the numerical simulation. The results indicate that the proposed method can reduce the higher order mode effect by linear combination.
Ikeda, Yujiro; Shimizu, Hirohiko*
Reza Kenkyu, 46(11), p.641 - 646, 2018/11
In viewing significant progresses in technical achievement toward a high-intensity neutron source driven by a high-power laser came up with the high power laser development, we have reviewed the currently most advanced moderator system and neutron optics, which are the key elements for the neutron beam applications. Regarding the moderators, concepts adopted in J-PARC pulsed neutron source, which is one of most advanced system, were described to give a baseline design. Also a new direction of moderator concept is shown, which could be a high brightness candidate for the high-intensity laser driven system. On the neutron optics, the most fundamental consideration is primarily reviewed along with recent progress in new devises for enrichment of neutron-beam characteristics.
Harada, Masahide; Teshigawara, Makoto; Oi, Motoki; Klinkby, E.*; Zanini, L.*; Batkov, K.*; Oikawa, Kenichi; Toh, Yosuke; Kimura, Atsushi; Ikeda, Yujiro
Nuclear Instruments and Methods in Physics Research A, 903, p.38 - 45, 2018/09
Times Cited Count:12 Percentile:74.00(Instruments & Instrumentation)Kitatani, Fumito; Tsuchiya, Harufumi; Toh, Yosuke; Hori, Junichi*; Sano, Tadafumi*; Takahashi, Yoshiyuki*; Nakajima, Ken*
KURRI Progress Report 2017, P. 99, 2018/08
Shibata, Kaoru
Hamon, 28(1), p.26 - 28, 2018/02
We briefly introduce the pedigree of the backscattering neutron spectrometer and the specification of DNA; a time-of-flight (TOF) type near-backscattering spectrometer (n-BSS), with Si crystal analyzers which was constructed at the Materials and Life Science Experimental Facility (MLF) of the Japan Proton Accelerator Research Complex (J-PARC).
Teshigawara, Makoto; Ikeda, Yujiro; Oi, Motoki; Harada, Masahide; Takada, Hiroshi; Kakishiro, Masanori*; Noguchi, Gaku*; Shimada, Tsubasa*; Seita, Kyoichi*; Murashima, Daisuke*; et al.
Nuclear Materials and Energy (Internet), 14, p.14 - 21, 2018/01
Times Cited Count:0 Percentile:0.00(Nuclear Science & Technology)We developed an Au-In-Cd (AuIC) decoupler material to reduce induced radioactivity instead of Ag-In-Cd one, which has a cut off energy of 1eV. In order to implement it into an actual moderator-reflector assembly, a number of critical engineering issues need to be resolved with regard to large-sized bonding between AuIC and A5083 alloys by the hot isostatic pressing process. We investigated this process in terms of the surface conditions, sizes, and heat capacities of large AuIC alloys. We also show a successful implementation of an AuIC decoupler into a reflector assembly, resulting in a remarkable reduction of radioactivity by AuIC compared to AIC without sacrificing neutronic performance.