A Study for establishment of passive creep-fatigue test techniques using the difference of thermal expansion coefficients of materials

Wakai, Takashi; Ando, Masanori; Okajima, Satoshi; Toyota, Kodai; Ishigami, Katsuo*; Onuma, Terumitsu*; Takahashi, Ryoya*; Asayama, Tai

Nihon Kikai Gakkai Rombunshu (Internet), 92(961), p.26-00004_1 - 26-00004_12, 2026/09

https://doi.org/10.1299/transjsme.26-00004

This paper describes current efforts within the Japan Atomic Energy Agency to develop a new materials surveillance technology for sodium-cooled fast reactors that aims at raising the confidence levels in operating reactors' structural integrity to the ones which could otherwise be achieved only by a vast amount of long-term material test data that needs decades to accumulate. The technology would allow for monitoring on-going materials degradation processes in an actual reactor, namely fatigue and creep-fatigue, by inserting a newly developed specimen for this purpose into the reactor and establishing procedures to observe and evaluate the specimen to get desired information such as the extent of degradation and residual life. To establish the test procedure, a passive creep-fatigue test model was developed in the framework of the "Civil Nuclear Energy Research and Development Working Group (CNWG)", a collaboration agreement between the US and Japan, and a demonstration test was performed under cyclic thermal loads using an electric furnace. Temperature conditions had been determined based on finite element analyses. As a result, the test specimen failed by several hundred thermal cycles. Macroscopic inspection of the specimen after the test showed the test had been performed successfully without buckling. Fracture surface observations suggested that the failure caused probably by fatigue or creep-fatigue.

International benchmark on radionuclide solubility and speciation for the Long-term In-situ Test (LIT) at Grimsel Test Site (GTS, Switzerland)

Noseck, U.*; Schfer, T.*; Alonso, U.*; Hamamoto, Takafumi*; Havlova, V.*; Hibberd, R.*; Ishidera, Takamitsu; Kitamura, Akira; Klajmon, M.*; Missana, T.*; et al.

Applied Geochemistry, 201, p.106762_1 - 106762_23, 2026/04

https://doi.org/10.1016/j.apgeochem.2026.106762

Thermodynamic benchmark calculations have been performed to better understand the behavior of Se(VI), Tc(VII), U(VI), Np(V), Am(III), Th(IV) and Pu(IV)) in the evolving geochemical conditions of the Long-term In-situ Test (LIT) at the Grimsel Test Site (GTS) and corresponding mock-up experiment. It also aims to identify the status of the geochemical speciation models and databases for these elements. The experiments are simulating the near-field conditions in some radioactive waste repository concept including a bentonite engineered barrier emplaced in crystalline rock and the findings are contributing to the long-term safety assessment of these facilities.

Analytical study on stress behavior of core graphite components using simplified viscoelastic evaluation model

Saijo, Tomoaki; Shimazaki, Yosuke; Ishihara, Masahiro

JAEA-Technology 2025-010, 126 Pages, 2025/12

JAEA-Technology-2025-010.pdf:12.52MB

During the operation of the High Temperature Engineering Test Reactor (HTTR), thermal stress is generated in the graphite components. In addition, graphite exhibits dimensional shrinkage and creep deformation under neutron irradiation. As a result, residual stress remains in the graphite components during reactor shutdown. Therefore, in the design of the HTTR core graphite structures, stress analyses of the graphite components have previously been performed using the finite element analysis code VIENUS. In the HTTR, the graphite components are exposed to a wide range of temperature, from approximately 400C to 1200C, depending on their location. Consequently, irradiation-induced behaviors such as material property changes and irradiation shrinkage vary among the graphite components. On the other hand, since VIENUS code evaluates stress based on thermal fluid and heat conduction analysis results, it is not suitable for parametric studies. In this study, the influence of irradiation behavior on the stress behavior of graphite components in the wide temperature range (400C to 1200C) was analyzed using simplified viscoelastic evaluation model, consisting of two beam elements, to conduct efficient parametric studies. Operational stress exhibits two distinct patterns depending on whether the irradiation temperature is below or above 800C, due to irradiation shrinkage. Residual stress approaches the thermal stress, preventing excessive increase even when irradiation shrinkage is large. Moreover good agreement in stress behavior trends was observed between the stress analysis results by the simplified viscoelastic evaluation model and VIENUS code. These results indicate that the simplified viscoelastic evaluation model is beneficial in simulating stress behavior.

Development of a prototype shielding-free radiation-resistant diamond neutron measurement system (Contract research); FY2023 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Hokkaido University*

JAEA-Review 2025-028, 66 Pages, 2025/11

JAEA-Review-2025-028.pdf:3.59MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2023. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2023, this report summarizes the research results of the "Development of a prototype shielding-free radiation-resistant diamond neutron measurement system" conducted in FY2023. The present study aims to develop a prototype of a shielding-free neutron measurement system for 1F. The system consists of diamond neutron detectors and radiation-resistant silicon integrated circuits, and has radiation resistance of more than 10 MGy and 4 MGy, respectively, at the component level in terms of integrated dose, and has a track record of stable operation under -ray dose rate environment of 1.5 kGy/h. Future applications are expected to include neutron detectors for debris investigation, criticality proximity monitoring monitors, and neutron detectors for dry tube investigation in pressure vessels. In this development, a prototype consisting of 100 diamond detector elements of 5 mm square will be developed to obtain system construction technology and to evaluate system performance. In addition, a subcriticality evaluation method will be developed. This development will lead to the completion of system development, development of the actual system in collaboration with the manufacturer, and introduction of the system into 1F decommissioning project.

Development of evaluation method for transition behavior of non-condensable gas in primary coolant system of pool-type sodium-cooled fast reactor; Preliminary evaluation of bubble detachment behavior from free surface in cold plenum region

Matsushita, Kentaro; Ezure, Toshiki; Fujisaki, Tatsuya*; Nakamine, Yoshiaki*; Imai, Yasutomo*; Tanaka, Masaaki

Nihon Kikai Gakkai 2025-Nendo Nenji Taikai Koen Rombunshu (Internet), 5 Pages, 2025/09

In the design of sodium-cooled fast reactors (SFRs), it is important to evaluate the transition behavior of non-condensable gas entrained into the primary coolant system due to cover gas entrainment and dissolution. In this study, trajectories of non-condensable gas bubbles in the cold plenum of the pool-type SFR evaluated by three-dimensional CFD analyses applying Discrete Phase Model. As the result of sensitivity analyses regarding bubble radius flowing into the cold plenum, it was clarified that the release rate of bubbles showed an increase according to the increase of bubble radius and an asymptotic increasing behavior in the large bubble radius cases.

Applicability of equivalent linear three-dimensional FEM analysis of reactor buildings to the seismic response of a soil-structure interaction system

Ichihara, Yoshitaka*; Nakamura, Naohiro*; Nabeshima, Kunihiko*; Choi, B.; Nishida, Akemi

Nuclear Engineering and Design, 441, p.114160_1 - 114160_10, 2025/09

https://doi.org/10.1016/j.nucengdes.2025.114160

This paper evaluates the applicability of equivalent linear analysis of reinforced concrete model, which uses frequency-independent complex damping with a small computational load, to the seismic design of nuclear power plant reactor buildings. To this end, a three-dimensional finite element method analysis of the soil-structure interaction focusing on nonlinear and equivalent linear seismic behavior of the building embedded in an ideally uniform soil condition was performed for the Kashiwazaki-Kariwa Nuclear Power Plant Unit 7 reactor building. The equivalent linear analysis results correlated well with the nonlinear analysis results of the shear strain, acceleration, displacement, and acceleration response spectrum, demonstrating the effectiveness of the equivalent linear analysis method. Moreover, the equivalent linear analysis results were more conservative than those of nonlinear analysis using the material constitutive law in evaluating the shear strain of the external wall of the reactor building. From this result, equivalent linear analysis method tended to obtain a lower building stiffness than nonlinear analysis under the analysis conditions used in this paper.

Decontamination effectiveness for wiping vehicle in screening during a nuclear emergency

Hiraoka, Hirokazu; Manabe, Kentaro; Hirouchi, Jun; Takahara, Shogo

Proceedings of Asian Symposium on Risk Assessment and Management 2025 (ASRAM 2025) (Internet), p.487 - 494, 2025/08

Evaluation of stability of precipitates under irradiation in 316FR steel used as fast reactor structural material

Toyota, Kodai; Onizawa, Takashi; Wakai, Eiichi*

Research & Development in Material Science (Internet), 21(5), p.2632 - 2637, 2025/06

Development of gas entrainment evaluation model based on distribution of pressure along vortex center line; Application to a gas entrainment experiment with traveling vortices in an open water channel flow?

Matsushita, Kentaro; Ezure, Toshiki; Tanaka, Masaaki; Imai, Yasutomo*; Fujisaki, Tatsuya*; Sakai, Takaaki*

Nuclear Engineering and Design, 432, p.113785_1 - 113785_16, 2025/02

https://doi.org/10.1016/j.nucengdes.2024.113785

Establishing an evaluation method for the gas entrainment (GE) of argon cover gas due to surface vortices is required in terms of safety design of sodium-cooled fast reactors. To modify the evaluation model in an in-house evaluation tool for GE, StreamViewer, a modified evaluation model on the pressure distribution along the vortex center line (PVL model) was proposed to identify the vortex center lines by connecting continuous vortex center points from the suction port to the surface and evaluate gas core length based on the balance between the hydrostatic pressure and the pressure decrease distribution along the vortex center line. PVL model was applied the three-dimensional numerical analysis results for the experiments where a plate induced unsteady traveling vortices in the open channel flow. Consequently, the GE evaluation using StreamViewer with PVL model could reproduce the relation between the inlet flow velocity and the gas core length in the unsteady vortex flow experiments.

High-temperature strength of modified type 316 steel for fast reactor fuel before and after neutron irradiation

Miyazawa, Takeshi; Uwaba, Tomoyuki; Yano, Yasuhide; Tanno, Takashi; Otsuka, Satoshi; Onizawa, Takashi; Ando, Masanori; Kaito, Takeji

JAEA-Technology 2024-009, 140 Pages, 2024/10

JAEA-Technology-2024-009.pdf:8.03MB

For the purpose of enhancing the reliability of fast reactor fuel designing using modified type 316 steel, the out-of-pile and in-pile mechanical data of modified type 316 steel cladding tubes and wrapper tubes were statistically analyzed with the knowledge on material science and engineering; the high-temperature strength equations of modified type 316 steel, which can be applied to high-dose neutron irradiation environment, were derived. The out-of-pile high-temperature tensile and creep data of modified type 316 steel cladding tubes and wrapper tubes were derived up to 900C, which is higher than the upper limit temperature of anticipated transient event of fast reactor. Using the extended database, the best-fit equation and the lower limit equation were derived for out-of-pile 0.2% proof strength, ultimate tensile strength and creep rupture strength while the best-fit equation and the upper and lower limit equations for creep strain. Furthermore, the degradation factors for tensile and creep strength, which will be produced by in-reactor environment (i.e., neutron irradiation in liquid sodium), were evaluated using the existing neutron irradiation data of modified type 316 steel, which were derived using the experimental fast reactor Joyo, the French proto-type fast reactor Phenix, the American experimental fast reactor FFTF. The derived equations were validated by the comparison with the experimental data.