Application of indentation technique to material degradation evaluation in the mercury target vessel for spallation neutron sources

Wakui, Takashi; Saito, Shigeru; Futakawa, Masatoshi

Jikken Rikigaku, 24(4), p.212 - 218, 2024/12

Irradiation damage is one of the main factors determining the lifetime of the mercury target vessel for spallation neutron source in J-PARC. To understand material degradation of the used vessels, it is planned to conduct an evaluation using inverse analyses with indentation tests on the structural materials of the used vessels and numerical experiments. This evaluation technique was applied to two kinds of ion-irradiated materials with different displacement damage doses, in which the irradiation condition was simulated. It could be confirmed that the ultimate strength increased, and the total elongation decreased with increasing irradiation. These trends are like the material degradation behaviors which have been reported by using small specimen's tensile tests.

Present status of the liquid lithium target facility in the international fusion materials irradiation facility (IFMIF)

Nakamura, Hiroo; Riccardi, B.*; Loginov, N.*; Ara, Kuniaki*; Burgazzi, L.*; Cevolani, S.*; Dell'Ocro, G.*; Fazio, C.*; Giusti, D.*; Horiike, Hiroshi*; et al.

Journal of Nuclear Materials, 329-333(1), p.202 - 207, 2004/08

https://doi.org/10.1016/j.jnucmat.2004.04.013

International Fusion Materials Irradiation Facility (IFMIF), being developed by EU, JA, RF and US, is a deuteron-lithium (Li) reaction neutron source for fusion materials testing. In the end of 2002, 3 year Key Element technology Phase (KEP) to reduce the key technology risk factors has been completed. This paper describes these KEP tasks results. To evaluate Li flow characteristics, a water and Li flow experiments have been done. To develop Li purification system, evaluation of nitrogen and tritium gettering materials have been done. Conceptual design of remote handling and basic experiment have been donde. In addition, safety analysis and diganostics design have been done. In the presentation, the latest design and future prospects will be also summarized.

Post-irradiation annealing and re-irradiation technique for LWR reactor pressure vessel material

Matsui, Yoshinori; Ide, Hiroshi; Itabashi, Yukio; Kikuchi, Taiji; Ishikawa, Kazuyoshi; Abe, Shinichi; Inoue, Shuichi; Shimizu, Michio; Iwamatsu, Shigemi; Watanabe, Naoki*; et al.

KAERI/GP-195/2002, p.33 - 40, 2002/00

Studies on the irradiation damage of the material of the RPV are inevitable for the LWR. Recently, the researches of annealing effect on the irradiation damage of RPV material were extensively carried out using specimens irradiated in the JMTR of the JAERI. As the next step, an annealing test of irradiated specimens and re-irradiation of annealed specimens were planned. The aim of the test is to evaluate the effect of annealing by comparing the damage of irradiated specimen, its recovery by annealing and the damage after re-irradiation. For the re-irradiation test of this study, JAERI developed a new capsule in which the specimens can be exchanged before and after annealing, and, re-irradiated afterward. The development of the capsule consisted of the design and fabrication of airtight connector for thermocouples and mechanical seal device which was fit to remote handling. Remote operation procedures for handling the radioactive capsule and for exchanging specimens were carefully performed. The results of the re-irradiation proved that the development was technically successful.

JAERI Tandem annual report 1999; April 1, 1999 - March 31, 2000

Department of Materials Science

JAERI-Review 2000-018, 151 Pages, 2000/11

JAERI-Review-2000-018.pdf:7.5MB

no abstracts in English