Proceedings of International Conference on Physics of Reactors 2022 (PHYSOR 2022) (Internet), 10 Pages, 2022/05
This paper proposes a new homogenization method, "Boundary Condition Free Homogenization (BCFH)". The traditional homogenization method separates the core calculation and the cell (assembly) calculation by assuming a specific boundary condition or a peripheral region in the cell calculation. Nevertheless, there are ambiguities and approximation in these assumptions, and they can also cause a decline in accuracy. BCFH aims to avoid these problems and improve the accuracy in the cell calculation such as homogenization. We imposed the conditions that the physical quantities in the cell related to the reaction rate preservation is preserved for any incoming partial current, during the homogenization. That is, the response matrices of cell average (or total) flux and outgoing partial current, to be the same form between heterogeneous and homogeneous system. As a result, homogenized parameters, such as cross-sections, superhomgenization factors, and discontinuity factors, are no longer dependent on a specific boundary condition. The new homogenized parameters obtained in this way are extended from the conventional vector form to the matrix form in BCFH. To investigate the performance of BCFH, numerical tests are done for the simplified models which originates in 750MW-class sodium-cooled fast reactor with MOX fuel core in Japan. It is found that BCFH is particularly effective in evaluating control rod reactivity worth and reaction rate distribution, compared to the traditional method. We conclude that the BCFH can be a promising homogenization concept for core neutronic analysis.
Choi, B.; Nishida, Akemi; Kawata, Manabu; Shiomi, Tadahiko; Li, Y.
JAEA-Research 2021-017, 174 Pages, 2022/03
Standard methods such as lumped mass models have been used in the assessment of seismic safety and the design of building structures in nuclear facilities. Recent advances in computer capabilities allow the use of three-dimensional finite element (3D FE) models to account for the 3D behavior of buildings, material nonlinearity, and the nonlinear soil-structure interaction effect. Since the 3D FE model enables more complex and high-level treatment than ever before, it is necessary to ensure the reliability of the analytical results generated by the 3D FE model. Guidelines for assuring the dependability of modeling techniques and the treatment of nonlinear aspects of material properties have already been created and technical certifications have been awarded in domains other than nuclear engineering. The International Atomic Energy Agency performed an international benchmark study in nuclear engineering. Multiple organizations reported on the results of seismic response studies using the 3D FE model based on recordings from the Niigata-ken Chuetsuoki Earthquake in 2007. The variation in their analytical results was significant, indicating an urgent need to improve the reliability of the analytical results by standardization of the analytical methods using 3D FE models. Additionally, it has been pointed out that it is necessary to understand the 3D behavior in the seismic fragility assessment of buildings and equipment, which requires evaluating the realistic nonlinear behavior of building facilities when assessing their seismic fragility. In view of these considerations, a standard guideline for the seismic response analysis method using a 3D FE model was produced by incorporating the latest knowledge and findings in this area. The purpose of the guideline is to improve the reliability of the seismic response analysis method using 3D FE model of reactor buildings. The guideline consists of a main body, commentaries, and appendixes; it also provides standard procedures
Ichihara, Yoshitaka*; Nakamura, Naohiro*; Moritani, Hiroshi*; Horiguchi, Tomohiro*; Choi, B.
Nihon Genshiryoku Gakkai Wabun Rombunshi, 21(1), p.1 - 14, 2022/03
In this study, we aim to approximately evaluate the effect of nonlinearity of reinforced concrete structures through seismic response analysis using the equivalent linear analysis method. A simulation analysis was performed for the ultimate response test of the shear wall of the reactor building used in an international competition by OECD/NEA in 1996. The equivalent stiffness and damping of the shear wall were obtained from the trilinear skeleton curves proposed by the Japan Electric Association and the hysteresis curves proposed by Cheng et al. The dominant frequency, maximum acceleration response, maximum displacement response, inertia force-displacement relationship, and acceleration response spectra of the top slab could be simulated well up to a shear strain of approximately =2.010. The equivalent linear analysis used herein underestimates the maximum displacement response at the time of ultimate fracture of approximately =4.010. Moreover, the maximum shear strain of the shear wall could not capture the locally occurring shear strain compared with that of the nonlinear analysis. Therefore, when employing this method to evaluate the maximum shear strain and test results, including those during the sudden increase in displacement immediately before the fracture, sufficient attention must be paid to its applicability.
Togawa, Orihiko; Okura, Takehisa; Kimura, Masanori; Nagai, Haruyasu
JAEA-Review 2021-021, 61 Pages, 2021/11
Triggered by the Fukushima Daiichi Nuclear Power Station accident, there have been a lot of arguments among various situations and levels about utilization of atmospheric dispersion models for a nuclear emergency preparedness and response. Most of these arguments, however, were alternative and extreme discussions on whether predictions by computational models could be applied or not for protective measures in a nuclear emergency, and it was hard to say that these arguments were politely conducted, based on scientific verification in an emergency response. It was known, on the other hand, that there were not a few potential users of atmospheric dispersion models and/or calculation results by the models within the Japan Atomic Energy Agency (JAEA) and outside. However, they seemed to have a lack of understanding and a misunderstanding on proper use of different kinds of atmospheric dispersion models. This report compares an outline of models and calculation method in atmospheric dispersion models for a nuclear emergency preparedness and response, with a central focus on the models which have been developed and used in the JAEA. Examples of calculations by these models are also described in the report. This report aims at contributing to future consideration and activities for potential users of atmospheric dispersion models within the JAEA and outside.
Choi, B.; Nishida, Akemi; Shiomi, Tadahiko; Kawata, Manabu; Li, Y.
Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 7 Pages, 2021/08
In the seismic safety assessment of building structures in nuclear facilities, lumped mass models are conventionally used. However, they cannot possess the required high-accuracy evaluation of nuclear facilities, such as the local response at the equipment location in a reactor building. In this point of view, a seismic response analysis method using a three-dimensional finite element (3D FE) model is indispensable. Although, it has been reported that the analysis results obtained using 3D FE models vary greatly depending on the experience and knowledge of analysts, the quality of analysis results should be insured by developing a standard analysis method. In the Japan Atomic Energy Agency, we have developed a guideline for seismic response analysis methods that adopt 3D FE models of reactor buildings. The guideline consists of a main body, commentary, and several supplements; it also includes procedures, recommendations, points of attention, and a technical basis for conducting seismic response analysis using 3D FE models of reactor buildings. In this paper, the outline of the guideline and analysis examples based on the guideline are presented.
Okuno, Hiroshi; Sato, Sohei; Kawakami, Takeshi; Yamamoto, Kazuya; Tanaka, Tadao
Journal of Radiation Protection and Research, 46(2), p.66 - 79, 2021/06
The nuclear accident at the Fukushima Daiichi Nuclear Power Station (NPS) of Tokyo Electric Power Company (TEPCO) was a typical one of the disastrous damages that induced evacuation of the residents around the NPS, which was triggered by the hugest earthquake and associated tsunami. This paper summarized early responses of the Japan Atomic Energy Agency (JAEA), especially of its Nuclear Emergency Assistance and Training Center (NEAT) to the off-site emergencies associated with the TEPCO's Fukushima Daiichi NPS. The paper addressed activities of emergency preparedness of the NEAT before 2011 in relevant to the TEPCO's Fukushima Daiichi NPS, the situation of the NEAT on March 11, 2011, and its early responses to the related off-site emergencies including those caused by the accident at the TEPCO's Fukushima Daiichi NPS. The paper also discussed issues associated with complex disasters.
Hashimoto, Makoto; Kinase, Sakae; Munakata, Masahiro; Murayama, Takashi; Takahashi, Masa; Takada, Chie; Okamoto, Akiko; Hayakawa, Tsuyoshi; Sukegawa, Masato; Kume, Nobuhide*; et al.
JAEA-Review 2020-071, 53 Pages, 2021/03
In the case of a nuclear accident or a radiological emergency, the Japan Atomic Energy Agency (JAEA), as a designated public corporation assigned in the Disaster Countermeasures Basic Act and the Armed Attack Situation Response Law, undertakes technical supports to the national government and local governments. The JAEA is requested to support to evaluate radiation doses to residents in a nuclear emergency, which is specified in the Basic Disaster Management Plan and the Nuclear Emergency Response Manual. For the dose evaluation, however, its strategy, target, method, structure and so on have not been determined either specifically or in detail. This report describes the results of investigation and consideration discussed in the "Working Group for Radiation Dose Evaluation at a Nuclear Emergency" established within the Nuclear Emergency Assistance and Training Center to discuss technical supports for radiation dose evaluation to residents in the case of a nuclear emergency, and aims at contributing to specific and detailed discussion and activities in the future for the national government and local governments, also within the JAEA.
Futemma, Akira; Sanada, Yukihisa; Kawasaki, Yoshiharu*; Iwai, Takeyuki*; Hiraga, Shogo*; Sato, Kazuhiko*; Haginoya, Masashi*; Matsunaga, Yuki*; Kikuchi, Hikaru*; Ishizaki, Azusa; et al.
JAEA-Technology 2020-019, 128 Pages, 2021/02
A large amount of radioactive material was released by the nuclear disaster of Fukushima Daiichi Nuclear Power Station (FDNPS), Tokyo Electric Power Company, caused by the Great East Japan Earthquake and the following tsunami on March 11, 2011. After the nuclear disaster, airborne radiation monitoring using manned helicopter has been utilized to grasp rapidly and widely the distribution of the radioactive materials around FDNPS. We prepare the data of background radiation dose, geomorphic characteristics and the controlled airspace around nuclear facilities of the whole country in order to make effective use of the monitoring technique as a way of emergency radiation monitoring and supply the results during accidents of the facilities. Furthermore, the airborne radiation monitoring has been conducted in Integrated Nuclear Emergency Response Drill to increase effectiveness of the monitoring. This report is summarized that the knowledge as noted above achieved by the aerial radiation monitoring around Higashidori nuclear power station, the nuclear fuel reprocessing plant in Rokkasho village and Shika nuclear power station, the full details of the aerial radiation monitoring in Integrated Nuclear Emergency Response Drill in the fiscal 2019. In addition, examination's progress aimed at introduction of airborne radiation monitoring using unmanned helicopter during nuclear disaster and the technical issues are summarized in this report.
Okuno, Hiroshi; Yamamoto, Kazuya
JAEA-Review 2020-066, 32 Pages, 2021/02
The International Atomic Energy Agency (abbreviated as IAEA) has been implementing the Asian Nuclear Safety Network (abbreviated as ANSN) activities since 2002. As part of this effort, Topical Group on Emergency Preparedness and Response (abbreviated as EPRTG) for nuclear or radiation disasters was established in 2006 under the umbrella of the ANSN. Based on the EPRTG proposal, the IAEA conducted 23 Asian regional workshops in the 12 years from 2006 to 2017. Typical topical fields of the regional workshops were nuclear emergency drills, emergency medical care, long-term response after nuclear/radiological emergency, international cooperation, national nuclear disaster prevention system. The Japan Atomic Energy Agency has produced coordinators for EPRTG since its establishment and has led its activities since then. This report summarizes the Asian regional workshops conducted by the IAEA based on the recommendations of the EPRTG.
Tsubaki, Hirohiko; Koizumi, Satoshi*
JAEA-Technology 2020-016, 16 Pages, 2020/11
Maintenance and Operation Section for Remote Control Equipment in Naraha Center for Remote Control Technology Development is the main part of the nuclear emergency response team of JAEA deal with Act on Special Measures Concerning Nuclear Emergency Preparedness. The section needs to train operators from every nuclear facility in JAEA to control crawler-type robots, and so on. A driving training of a crawler-type robot used a reciprocating passage (U-shaped passage look from above) is one of the important training programs. The section always assembled a reciprocating passage with borrowed parts from other sections for every training of being used the passage. The section designed and produced training-way system included a reciprocating passage with stairs in 2019 fiscal year. The system makes the section members labor-saving, possible to set any time for training and diverse training-ways with easy assembling system. This report shows design and produce training-way system for crawler-type robots against nuclear emergency of JAEA facilities by Maintenance and Operation Section for Remote Control Equipment.
Togawa, Orihiko; Hayakawa, Tsuyoshi; Tanaka, Tadao; Yamamoto, Kazuya; Okuno, Hiroshi
JAEA-Review 2020-017, 36 Pages, 2020/09
In 2010, the government of Japan joined the Response and Assistance Network (RANET) of the International Atomic Energy Agency (IAEA), in order to contribute to offering international assistance in the case of a nuclear accident or radiological emergency. At that occasion, the Japan Atomic Energy Agency (JAEA) was registered as the National Assistance Capability (NAC) having resources capable of the External Based Support (EBS) in the following seven areas: (1) aerial survey, (2) radiation monitoring, (3) environmental measurements, (4) assessment and advice, (5) internal dose assessment, (6) bioassay and (7) dose reconstruction. After the registration, three inquiries were directed to the JAEA about a possibility of its support. However, the JAEA's assistance has not eventually been realized. On the other hand, the JAEA participated almost every year in the international Convention Exercise (ConvEx) carried out by the IAEA in connection with RANET. This report describes an outline of the RANET and related activities of the JAEA for RANET registration and participation in the ConvEx.
Nishiyama, Yutaka; Iwai, Masaki; Tsubaki, Hirohiko; Chiba, Yusuke; Hayasaka, Toshiro*; Ono, Hayato*; Hanyu, Toshinori*
JAEA-Technology 2020-006, 26 Pages, 2020/08
Maintenance and Operation Section for Remote Control Equipment in Naraha Center for Remote Control Technology Development is the main part of the nuclear emergency response team of JAEA deal with Act on Special Measures Concerning Nuclear Emergency Preparedness. The section needs to remodel crawler-type robots for tasks, crawler-type scouting robots, and so on. About two crawler-type robots for tasks, the section designed and mounted advanced wireless communication equipment on manipulators mounted on the two robots. The crawler part of the robot has been able to be controlled by way of the new equipment, and when it is broken down, it can be changed by way of an original equipment. And the new equipment makes a single relay robot controllable both the crawler part and the manipulator part of the robot, in case of wireless relay robots being needed. And after checking the ability and characteristic about 5 wireless communication equipment, the section chose and mounted the best equipment on one crawler-type scouting robot. This report shows design and mounting advanced wireless communication equipment on the two crawler-type robots for tasks and on the one crawler-type scouting robot.
Riyana, E. S.; Okumura, Keisuke; Terashima, Kenichi; Matsumura, Taichi; Sakamoto, Masahiro
Mechanical Engineering Journal (Internet), 7(3), p.19-00543_1 - 19-00543_8, 2020/06
Choi, B.; Nishida, Akemi; Muramatsu, Ken*; Takada, Tsuyoshi*
Nihon Jishin Kogakkai Rombunshu (Internet), 20(2), p.2_1 - 2_16, 2020/02
no abstracts in English
Iwasaki, Toshiki*; Sekiyama, Tsuyoshi*; Nakajima, Teruyuki*; Watanabe, Akira*; Suzuki, Yasushi*; Kondo, Hiroaki*; Morino, Yu*; Terada, Hiroaki; Nagai, Haruyasu; Takigawa, Masayuki*; et al.
Atmospheric Environment, 214, p.116830_1 - 116830_11, 2019/10
The utilization of numerical atmospheric dispersion prediction (NDP) models for accidental discharge of radioactive substances was recommended by a working group of the Meteorological Society of Japan. This paper is to validate the recommendation through NDP model intercomparison in the accidental release from the Fukushima Dai-ichi Nuclear Power Plant in 2011. Emission intensity is assumed to be constant during the whole forecast period for the worst-case scenario unless time sequence of emission is available. We expect to utilize forecasts of surface air contaminations for preventions of inhalations of radioactive substances, and column-integrated amounts for mitigation of radiation exposure associated with wet deposition. Although NDP forecasts have ensemble spread, they commonly figure out relative risk in space and time. They are of great benefit to disseminating effective warnings to public without failure. The multi-model ensemble technique may be effective to improve the reliability.
Journal of Computational Chemistry, 40(24), p.2072 - 2085, 2019/09
Nagai, Haruyasu; Yamazawa, Hiromi*
Environmental Contamination from the Fukushima Nuclear Disaster; Dispersion, Monitoring, Mitigation and Lessons Learned, p.230 - 242, 2019/08
An overview of SPEEDI is provided in the context of it development, functions, and role in the framework of nuclear emergency management. Thereafter, we examine how it was used and how it should be used for the Fukushima Daiichi Nuclear Power Station accident from a system developer perspective. We believe that our review can provide lessons or tasks for improving the prediction system and for considering better utilization of the system; it is also beneficial to consider reconstructing the framework of nuclear emergency management. Furthermore, we hope this review will prove useful in understanding and effectively using the atmospheric dispersion predictions from the system in the case of a similar accident in the future.
Maeda, Makoto; Furutaka, Kazuyoshi; Kureta, Masatoshi; Ozu, Akira; Komeda, Masao; Toh, Yosuke
Journal of Nuclear Science and Technology, 56(7), p.617 - 628, 2019/07
Kawabata, Kuniaki; Yamada, Taichi; Shirasaki, Norihito; Ishiyama, Hiroki
Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2019) (USB Flash Drive), p.559 - 564, 2019/07
Yoshizawa, Atsufumi*; Oba, Kyoko; Kitamura, Masaharu*
Nihon Genshiryoku Gakkai Wabun Rombunshi, 18(2), p.55 - 68, 2019/06
This study aims to improve the potential of an emergency response by analyzing the workload management during the accident at the Emergency Response Center (ERC) of TEPCO's Fukushima Daiichi Nuclear Power Plant. Specifically, the research focused on the response of the ERC during the time between the discontinuation of Unit 3 core water injection and its recovery. It identified the different types of workload at the ERC had and how they had been managed based on the record of a TV conference. It also deduced the casual factors of the responses, supplementing the interview record of the director of ERC at the time by applying workload management analysis. On the basis of these findings, lessons to enhance the potential of the on-site emergency response have been obtained for ERC and outside organizations.