Residual stress relief effect in gradient structural steel and remaining life evaluation under stochastic fatigue loads

Qin, T. Y.*; Hu, F. F.*; Xu, P. G.; Zhang, R.*; Su, Y. H.; Ao, N.*; Li, Z. W.*; Shinohara, Takenao; Shobu, Takahisa; Wu, S. C.*

International Journal of Fatigue, 202, p.109233_1 - 109233_16, 2026/01

https://doi.org/10.1016/j.ijfatigue.2025.109233

A Methodology for the design of non-uniform core configurations in the modified STACY facility

Dechenaux, B.*; Brovchenko, M.*; Araki, Shohei; Gunji, Satoshi; Suyama, Kenya

Annals of Nuclear Energy, 223, p.111555_1 - 111555_11, 2025/12

https://doi.org/10.1016/j.anucene.2025.111555

High-speed 3D modeling for nuclear reactor environment based on feature extraction results from video images (Contract research); FY2023 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Sapporo University*

JAEA-Review 2025-033, 71 Pages, 2025/11

JAEA-Review-2025-033.pdf:4.48MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2023. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2023, this report summarizes the research results of the "High-speed 3D modeling for nuclear reactor environment based on feature extraction results from video images" conducted in FY2023. The present study aims to develop a 3D model for a workspace that maximizes the amount of information based on the features extracted from video, which is taken when surveying the primary containment vessel and inside the reactor building as part of the decommissioning of 1F, considering within a specified time. In FY2023, we verified extracting effective shooting conditions for obtaining 3D reconstruction based on photogrammetry and the method extracting feature values that can generate 3D restoration results from a small amount of data within a specified time based on deep learning. In addition, we applied point cloud data extracted from video to segmentation and classified it into parts with instance labels.

Investigation of effects of nano interfacial phenomena on dissolution aggregation of alpha nanoparticles by using micro nano technologies (Contract research); FY2023 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Institute of Science Tokyo*

JAEA-Review 2025-026, 72 Pages, 2025/11

JAEA-Review-2025-026.pdf:7.97MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2023. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2022, this report summarizes the research results of the "Investigation of effects of nano interfacial phenomena on dissolution aggregation of alpha nanoparticles by using micro nano technologies" conducted in FY2023. To ensure the safety of retrieval and storage management of nuclear fuel debris generated by the Fukushima-Daiichi Nuclear Power Station accident, understanding of dissolution-denaturation behavior of the fuel debris alpha particles is one of the most crucial issues. This research aims to create novel microfluidic real-time measurement device for elucidating dissolution, aggregation, and denaturation processes of metal oxide nanoparticles under various solution environments, and clarify their nano-size and interfacial effects. In this year, we conducted bulk and micro dissolution tests of simulated fuel debris particles (UO mechanical-treated nanoparticles, UO chemical-treated nanoparticles, and (U,Zr)O nanoparticles), and successfully clarified that the effects of particle sizes, reaction times, and HO concentrations on the dissolution behavior of each nanoparticle. In particular, it was found that (U,Zr)O nanoparticles have different degrees of Zr catalytic reactions depending on HO concentrations, resulting in the generation of different amounts of gas and U. Moreover, we developed a new microfluidic device which enables to instantly react the nanoparticles with HO solutions, and determined dynamic aggregation and dissolution rates of the nanoparticles. The research was carried out in close collaboration with UK researchers, and achieved the expected goal of this year.

Optimising sodium incorporation into potassium-activated metakaolin-based alkali-activated materials

Chaerun, R. I.; Sato, Junya; Hiraki, Yoshihisa; Yoshida, Yukihiko; Sato, Tsutomu*; Osugi, Takeshi

Construction and Building Materials, 500, p.144270_1 - 144270_10, 2025/11

https://doi.org/10.1016/j.conbuildmat.2025.144270

Alkali-activated materials (AAMs), particularly those derived from metakaolin, have gained significant attention as sustainable binders for hazardous waste immobilisation, owing to their dense microstructure and chemical durability. Their amorphous aluminosilicate framework enables effective encapsulation of hazardous materials and reduces environmental risks. However, maintaining the stability of this amorphous network is challenging, particularly when sodium (Na)-rich precursors are used, as excess Na) promotes crystallisation and compromises matrix integrity. This study systematically investigates the influence of Na) concentration on the structural stability of metakaolin-based AAMs activated primarily with potassium (K)). The objective is to identify the threshold Na incorporation level that preserves the amorphous structure and maintains chemical stability. Transmission electron microscopy (TEM), Raman spectroscopy, and thermodynamic modelling were employed to examine the structural evolution of K-AAMs across a range of Na:K molar ratios. The results reveal that higher Na:K ratios induce nanopore formation and early crystallisation of Na-rich zeolitic phases, which can reduce matrix stability. In contrast, an optimal Na:K ratio was identified that maintains the amorphous network and preserves the aluminosilicate framework. These findings provide valuable insights into optimising K-AAMs for advanced, durable waste encapsulation technologies.

An Analytical study on Russia's civilian nuclear energy utilization

Kawasaki, Nobuchika

JAEA-Review 2025-043, 74 Pages, 2025/10

JAEA-Review-2025-043.pdf:2.45MB

Russia is one of the most advanced countries in the civilian use of nuclear energy. However, understanding the internal mechanisms of its nuclear program remains difficult due to various reasons. Therefore, this study presents a historical overview of Russia's nuclear energy utilization, fuel supply, fuel manufacturing capabilities, and concepts regarding reprocessing and the nuclear fuel cycle. From this overview, insights have been extracted and analyzed. These insights are then organized under two strategic perspectives: "Strategic diversity and continuity in developments and demonstrations" and "Diversity in utilizations and deployments," with considerations of implications for Japan, as below. Russia's nuclear energy policy strategically utilizes a variety of reactor types and fuel cycle technologies to expand nuclear power generation both domestically and internationally. Currently, nuclear power, centered on light-water reactors (VVER series), accounts for about 20% of Russia's electricity supply, and there are plans to increase this share to 25% by 2045. A wide range of reactors, from large-scale to medium and small modular reactors, are being constructed in Russia. Russia is also actively developing fast reactor technologies, and focusing on the reprocessing and recycling of spent fuel. Internationally, VVER-1200 reactors are under construction in several countries, and cooperation with China is deepening in the field of fast reactors. Notably, Russia offers an integrated, or selectively customizable, package of nuclear technology services on the international stage. These include not only reactor deployment, but also fuel supply, reprocessing, waste management, and even the provision of radioisotopes. Rather than simply exporting products or technology, Russia fosters long-term relationships and trust by flexibly responding to the conditions and needs of partner countries. For this reason, Russia promotes the technology developments in advance within the country in areas anticipated for future overseas deployment. It carefully selects target technologies and services and systematically rolls them out. This flexible strategy, combining "technological diversity" and "strategic consistency", enables cooperation with countries across various geopolitical contexts. For Japan, this strategic approach offers valuable lessons on how to engage in comprehensive international nuclear cooperation, not merely through technology exports, but through integrated approaches that encompass the entire fuel cycle, and by combining elements such as fast reactors and RI supply.

Embedded system using a radiation-hardened processor (Contract research); FY2023 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Okayama University*

JAEA-Review 2025-022, 51 Pages, 2025/10

JAEA-Review-2025-022.pdf:3.05MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2023. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2022, this report summarizes the research results of the "Embedded system using a radiation-hardened processor" conducted in FY2023. The present study aims to develop a radiation-hardened optoelectronic processor with 10 MGy total-ionizing-dose (TID) tolerance, a radiation-hardened processor with 4 MGy TID tolerance, a radiation-hardened memory with 4 MGy TID tolerance, and a radiation-hardened power supply unit with 1 MGy TID tolerance. Up to now, we have successfully developed a radiation-hardened optoelectronic processor with 10 MGy TID tolerance, a radiation-hardened memory with 4 MGy TID tolerance. Moreover, Japanese research group will support radiation-hardened field programmable gate arrays, power supply units, and radiation-hardened optical systems for radiation-hardened robot systems and radiation sensor systems developed by UK team. Finally, we will provide our radiation-hardened robot system which can identify the intensity and type of radiation.

Uncertainty reduction of the FPs transport mechanism and debris degradation behavior and evaluation of the reactor contamination of debris state on the basis of the accident progression scenario of Fukushima Daiichi Nuclear Power Station Unit 2 and 3 (Contract research); FY2023 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Institute of Science Tokyo*

JAEA-Review 2025-012, 96 Pages, 2025/10

JAEA-Review-2025-012.pdf:3.99MB

JAEA/CLADS had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). Among the adopted proposals in FY2021, this report summarizes the research results of the "Uncertainty reduction of the FPs transport mechanism and debris degradation behavior and evaluation of the reactor contamination of debris state on the basis of the accident progression scenario of Fukushima Daiichi Nuclear Power Station unit 2 and 3" conducted from FY2021 to FY2023. The present study aims to elucidate the cause of the high dosage under shield plug by clarification of to the cesium behavior of migration, adhesion to structure and deposition as well as evaluate the properties of metal-rich debris predeceasing melted through the materials science approach based on the most probable scenario of accident progression of Unit 2 and 3. Through three years investigation, chemi-absorption configuration of Cs has been elucidated to change with acidity of steel surface during oxidation in humid atmosphere and CsO trapping compound as well as penetration depth have found to be importantly considered. For metallic debris, solid oxidation was found to be controlled by FeO formation and molten state was found to tend to preferentially yield ZrO resulting in formation of slate structure during solidification. Present findings obtained are contributing to better improve the accuracy of accident progression scenario in FDNPP in viewpoint of backward analysis.

Corrigendum to "Neutron diffraction study on the deuterium composition of nickel deuteride at high temperatures and high pressures" [Phys. B Condens. Matter. 587 (2020) 412153]

Saitoh, Hiroyukki*; Machida, Akihiko*; Hattori, Takanori; Sano, Asami; Funakoshi, Kenichi*; Sato, Toyoto*; Orimo, Shinichi*; Aoki, Katsutoshi*

Physica B; Condensed Matter, 714, p.417234_1 - 417234_3, 2025/10

https://doi.org/10.1016/j.physb.2025.417234

Corrigendum to "Neutron diffraction study on the deuterium composition of nickel deuteride at high temperatures and high pressures" [Phys. B Condens. Matter. 587 (2020) 412153] was reported.

Research on radioactive aerosol control and decontamination at Fukushima Daiichi Nuclear Power Station Decommissioning (Contract research); FY2023 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2025-015, 73 Pages, 2025/09

JAEA-Review-2025-015.pdf:5.9MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2023. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2021, this report summarizes the research results of the "Research on radioactive aerosol control and decontamination at Fukushima Daiichi Nuclear Power Station decommissioning" conducted from FY2021 to FY2023. The present study aims to develop a safe laser decontamination system that integrates advanced particle detection and characterization systems with aerosol dispersion control, in collaboration with UK researchers. For aerosol dispersion control, new containment methods ranging from simple mechanical containment hoods to optical laser shields are jointly investigated. The Japanese team will develop a radioactive dispersion control method based on the use of water mist and water spray to reduce radiation risks during laser cutting and decontamination applications. Based on data on aerosol particles provided by the UK team, the potential to enhance aerosol scrubbing efficiency will be explored. Additionally, the effect of charge enhancement will be evaluated. The UK team will develop laser-based aerosol containment methods and conducting experiments to improve the condensation of aerosol particles and mist in spray scrubbing. The development of aerosol removal technologies and strategies will be carried out through comprehensive experimental and computational studies. Experiments will be conducted at UTARTS facility to verify simultaneous operations such as laser decontamination, cutting, and spray operations. Aerosol measurements will also be performed to obtain high spatial resolution data that can better validate CFD models. In the final year, mock-up tests will be conducted to verify the system's operation and decontamination performance at full scale, evaluating the decontamination system developed through this research.