Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamamoto, Tomohiko; Watakabe, Tomoyoshi; Miyazaki, Masashi; Okamura, Shigeki; Miyagawa, Takayuki; Yokoi, Shinobu*; Fukasawa, Tsuyoshi*; Fujita, Satoshi*
Mechanical Engineering Journal (Internet), 11(2), p.23-00393_1 - 23-00393_21, 2024/04
Mori, Takashi*; Shimada, Takahiro*; Kai, Satoru*; Otani, Akihito*; Yamamoto, Tomohiko; Yan, X.
Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 8 Pages, 2023/07
Yamamoto, Tomohiko; Watakabe, Tomoyoshi; Miyazaki, Masashi; Miyagawa, Takayuki*; Yokoi, Shinobu*; Okamura, Shigeki*; Fukasawa, Tsuyoshi*; Fujita, Satoshi*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
Mori, Takashi*; Shimada, Takahiro*; Kai, Satoru*; Otani, Akihito*; Yamamoto, Tomohiko; Yan, X.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05
Yamano, Hidemasa; Okamura, Shigeki*
Transactions of the 26th International Conference on Structural Mechanics in Reactor Technology (SMiRT-26) (Internet), 9 Pages, 2022/07
Seismic response analyses were conducted for the pipe with and without the seismic isolation system based on the response waveforms. This study performed a fragility analysis by setting uncertainty parameters on the basis of existing studies. The comparison results showed that the seismic isolation technology is effective for the pipe to prevent cliff-edge effects. In other words, the seismic margin for the seismically isolated plant is 1.2 times larger than that of the non-isolated plant. To evaluate the response reduction effect, this study focused on response coefficients of components as uncertainty parameters, which were specified within a physically possible range. Even if the uncertainty is considered, the HCLPF for the isolated plant is nearly twice as high as the non-isolated plant, namely the response reduction effect is still significant for the isolated plant. Therefore, the isolation technology is effective to avoid cliff-edge effects.
Takeda, Nobukazu; Nakahira, Masataka; Kakudate, Satoshi; Takahashi, Hiroyuki*; Shibanuma, Kiyoshi; Yabana, Shuichi*; Matsuda, Akihiro*
Proceedings of 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures (CD-ROM), p.299 - 306, 2005/00
For the ITER, a fusion experimental reactor, it is planned to use rubber bearings in order to enhance the reliability of integrity with a sufficient margin even for the earthquakes beyond the design basis earthquake. In application for nuclear plants, the vertical compression of the isolator is 25 MPa and there is no experience for such a high compression as 10 MPa to be used for the ITER. Therefore, there is not enough design data of the rubber bearings with high compression, and thus a detailed estimation of performance is necessary. As a result of the endurance test after aging, it was validated that the bearing can be applied safely until 400th cycle even after 40 years of aging. On the other hand, the residual deformation was found at the 246th cycle. This means that the residual deformation can be observed enough earlier than the change of the macroscopic mechanical parameter such as stiffness. Therefore, it is possible to prevent break of the bearing during operation by sensing a sign of break with a periodical visual inspection.
Takeda, Nobukazu; Nakahira, Masataka; Tada, Eisuke; Fujita, Satoshi*; Fujita, Takafumi*
Nihon Jishin Kogakkai Rombunshu (Internet), 4(3), p.298 - 304, 2004/04
ITER is a Tokamak-type international fusion experimental device composed of superconducting magnets, a vacuum vessel, and so on. These are operated at a quie wide temperature ranging from 4K to 200 degree C. For this, multiple plates have been chosen as the machine support so as to peovide flexibility in the radial direction while keeping high rigidity vertically. This results in a low natural frequency of around 4Hz in the horizontal direction. Since those structures are designed in accordance with the IAEA seismic acceleration of 0.2g as a reference, a seismic isolation is required if earthquake-proof larger than 0.2g is necessary. Considering these conditions, analytical and experimental studies have been conducted to characterize the ITER dynamic response in Japan. This paper outlines the latest status on seismic design for ITER in Japan and evaluation on tokamak dynamic response and verification tests using scaled tokamak model.
Tada, Eisuke; Hada, Kazuhiko; Maruo, Takeshi; Safety Design/Evaluation Group
Purazuma, Kaku Yugo Gakkai-Shi, 78(11), p.1145 - 1156, 2002/11
no abstracts in English
Yabana, Shuichi*; Matsuda, Akihiro*; Nakahira, Masataka; Osaki, Toshio*
Nihon Kenchiku Gakkai 2002-Nendo Taikai Koen Kogaishu, P. 495, 2002/08
no abstracts in English
Tsutsumi, Hideaki*; Yamada, Hiroyuki; Teragaki, Toshio*; Ebisawa, Katsumi; Shibata, Katsuyuki
Seismic Engineering 2000 (PVP-Vol.402-1), p.141 - 146, 2000/00
no abstracts in English
Nakahira, Masataka; Takeda, Nobukazu; Takahashi, Hiroyuki*; Yagenchi, Akira*; Akutsu, Yoichi; Tada, Eisuke; Yabana, Shuichi*
Proceedings of 7th International Conference on Nuclear Engineering (ICONE-7) (CD-ROM), 10 Pages, 1999/00
no abstracts in English
Tsunematsu, Toshihide; Namba, Haruyuki*; Akutsu, Yoichi; Okawa, Yoshinao; Yagenji, Akira; Takeda, Masatoshi*; Yajima, Kensaku*; Nitta, Yoshio*; Kobayashi, Kenichi*; Maeda, Ikuo*; et al.
Fusion Engineering and Design, 41(1-4), p.415 - 420, 1998/09
Times Cited Count:4 Percentile:38.51(Nuclear Science & Technology)no abstracts in English
Shibata, Katsuyuki; ;
Proc. of 7th German-Japan Joint Seminar on Research in Structural Strength and NDE-Problems, 12 Pages, 1997/00
no abstracts in English
Sobajima, Makoto; ; Kondo, Masaaki; ; Muramatsu, Ken;
10th Pacific Basin Nuclear Conf. (10-PBNC), 1, p.629 - 636, 1996/00
no abstracts in English
Fukasawa, Tsuyoshi*; Hirayama, Tomoyuki*; Yokoi, Shinobu*; Hirota, Akihiko*; Somaki, Takahiro*; Yukawa, Masaki*; Miyagawa, Takayuki*; Uchita, Masato*; Yamamoto, Tomohiko; Miyazaki, Masashi; et al.
no journal, ,
The seismic integrity of sodium-cooled fast reactor (SFR) designs in nuclear power plants is of paramount importance. Based on the static loading test, this study investigates the force-displacement relationship and load transference in a three-dimensional seismic isolation system that is envisaged for use in reactor buildings. In SFR designs, the necessity for thin-walled structures to maintain high-temperature structure integrity can unintentionally compromise the seismic design. Consequently, addressing horizontal and vertical seismic forces become vital for ensuring seismic resilience. Currently, there are no specific codes or standards governing the integration of Three-dimensional seismic isolation systems into nuclear reactor buildings. However, current guidelines for the design of horizontal seismic isolation systems emphasize the necessity to clarify the force-displacement relationship and load transfer under conditions of superimposed horizontal and vertical loads. This study involves static loading tests performed on a half-scale specimen, which is subjected to horizontal and vertical loads exceeding the design basis ground motions for the SFR. The findings affirm that the system's horizontal supporting function maintains the segregation of horizontal and vertical load transference, even under seismic loads that exceed the design basis ground motions.
Okamura, Shigeki*; Fujita, Satoshi*; Uchita, Masato*; Fukasawa, Tsuyoshi*; Yamamoto, Tomohiko
no journal, ,
no abstracts in English
Yoshida, Shogo*; Nakamura, Izumi*; Yamamoto, Tomohiko; Mori, Takashi*; Fukui, Hirohisa*; Sato, Eiji*
no journal, ,
Floating seismic isolation building has been proposed as a measure to reduce seismic response of small modular reactor (SMR). Demonstration experiment on floating seismic isolation building was conducted in February 2024. Seismic response analysis model for OpenFOAM was built by reference to the demonstration experiment. To confirm the availability of the analytical model, the time history analysis was conducted using a sine wave with an amplitude of 0.05 m in the vertical direction and horizontal direction, respectively. This paper describes the overview of the analytical model and the results of Dynamic response analysis.
Yamamoto, Tomohiko; Watakabe, Tomoyoshi; Miyagawa, Takayuki*; Okamura, Shigeki*; Fukasawa, Tsuyoshi*; Fujita, Satoshi*
no journal, ,
This report describes that the concepts and specifications of "3-dimensional seismic isolation device" adopting in a Sodium-cooled fast reactor, summary of various tests and analyzes, and shows feasibility of 3-dimensional seismic isolation device for earthquake response reduction effect.