Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
Dai-26-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2022/07
JAEA is implementing a simulation of a two-phase flow in the reactor core by TPFIT and JUPITER which are developed by JAEA based on the surface tracking method. However, it is impossible to simulate a boiling on the heating surface in the large-scale domain by this type of simulation method since the simulation of boiling based on the surface tracking method needs the fine mesh which sufficiently resolves the initiation of boiling. Therefore, JAEA started to develop the simplified boiling model applied for the two-phase flow in the fuel assemblies. In this study, the simulation results of the convection boiling on a vertical heating surface and the comparison between the simulation results and experimental results are shown.
Ono, Ayako; Yamashita, Susumu; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 16 Pages, 2022/03
JAEA is developing the methodology to predict the critical heat flux based on a mechanism in order to reduce the cost for full mock-up test. The evaluation method based on a mechanism is expected to be able to predict in the wide range of parameter under the unexpected conditions including the severe accident. In this study, the JUPITER code developed by JAEA is examined to apply for the two-phase flow simulation of LWR fuel assembly with the spacer grid. The benchmark data of single-phase flow in the bundle with the spacers by KAERI were used to validate the simulation result by JUPITER. Moreover, the single-phase flow simulation was conducted by another simulation method, STAR-CCM+, as a supplemental analysis to consider the effect of the different simulation methods. Finally, the two-phase flow simulation for the bundle with the spacer was conducted by JUPITER. The effect of the spacer with a vane on the bubble behavior is discussed.
Ono, Ayako; Yamashita, Susumu; Suzuki, Takayuki*; Yoshida, Hiroyuki
Mechanical Engineering Journal (Internet), 7(3), p.19-00583_1 - 19-00583_12, 2020/06
JAEA is implementing the 3D detailed nuclear-thermal-coupled analysis code to analyze the transition state of the core and to reduce the likelihood of the design. In the development plan, the computational fluid dynamics code based on the VOF method, JUPITER, is applied for TH part of the 3D detailed nuclear-thermal-coupled analysis code.
Ono, Ayako; Yamashita, Susumu; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-18) (USB Flash Drive), p.666 - 677, 2019/08
An evaluation methodology of critical heat fluxes (CHFs) based on a mechanism for fuel assemblies in light water reactors (LWRs) is needed in order to design and evaluate the safety for the fuel assemblies in LWRs. In our study, the numerical simulation with surface-tracking will be applied for the two-phase flow in fuel assemblies in order to obtain the detail data relating to the size and velocity of bubbles in the subchannel, which is needed to predict the CHF based on the mechanism. In this study, the numerical simulation of two-phase flow in 44 bundle was implemented by using JUPITER in order to establish the evaluation method of the size and velocity of bubbles by the numerical simulation, which is the multi-physics simulation code and enable to track the gas-liquid surface. The simulation results are validated by the curve of flow regime for air-water under the adiabatic condition. The bubble and velocity of bubbles obtained by simulation results are analyzed.