JOPSS - Search Results

JAEA Reports

Microstructural observation of simulated fuel kernels for Pu-burner high temperature gas-cooled reactor in Japan

Aihara, Jun; Ueta, Shohei; Honda, Masaki*; Kasahara, Seiji; Okamoto, Koji*

JAEA-Research 2024-012, 98 Pages, 2025/02

JAEA-Research-2024-012.pdf:32.24MB

Concept of Pu-burner high temperature gas-cooled reactor (HTGR) was proposed for the purpose of more safely reducing amount of recovered Pu. In Pu-burner HTGR concept, coated fuel particle (CFP), with ZrC coated yttria stabilized zirconia (YSZ) containing PuO $_{2}$ (PuO $_{2}$ -YSZ) small particle and with tri-structural isotropic (TRISO) coating, is employed for very high burn-up and high nuclear proliferation resistance. ZrC layer is oxygen getter. In research project of Pu-burner HTGR carried out from fiscal year of 2014 to fiscal year of 2017, simulated CFPs were fabricated using Ce to simulate Pu. Moreover, simulated fuel compacts were fabricated using fabricated simulated CFPs. In this report, results of microstructural observation of CeO $_{2}$ -YSZ and ZrC layer at each fabrication step are reported.

Journal Articles

Study on plutonium burner high temperature gas-cooled reactor in Japan; Introduction scenario, reactor safety and fabrication tests of the 3S-TRISO fuel

Ueta, Shohei; Mizuta, Naoki; Fukaya, Yuji; Goto, Minoru; Tachibana, Yukio; Honda, Masaki*; Saiki, Yohei*; Takahashi, Masashi*; Ohira, Koichi*; Nakano, Masaaki*; et al.

Nuclear Engineering and Design, 357, p.110419_1 - 110419_10, 2020/02

https://doi.org/10.1016/j.nucengdes.2019.110419

Times Cited Count：1 Percentile：9.26(Nuclear Science & Technology)

The concept of a plutonium (Pu) burner HTGR is proposed to incarnate highly-effective Pu utilization by its inherent safety features. The security and safety fuel (3S-TRISO fuel) employs the coated fuel particle with a fuel kernel made of plutonium dioxide (PuO $_{2}$ ) and yttria stabilized zirconia (YSZ) as an inert matrix. This paper presents feasibility study of Pu burner HTGR and R&D on the 3S-TRISO fuel.

JAEA Reports

Code-B-2.5.2 for stress calculation for SiC-TRISO fuel particle

Aihara, Jun; Goto, Minoru; Ueta, Shohei; Tachibana, Yukio

JAEA-Data/Code 2019-018, 22 Pages, 2020/01

JAEA-Data-Code-2019-018.pdf:1.39MB

Concept of Pu-burner high temperature gas-cooled reactor (HTGR) was proposed for purpose of more safely reducing amount of recovered Pu. In Pu-burner HTGR concept, coated fuel particle (CFP), with ZrC coated yttria stabilized zirconia (YSZ) containing PuO $_{2}$ (PuO $_{2}$ -YSZ) small particle and with tri-structural isotropic (TRISO) coating, is employed for very high burn-up and high nuclear proliferation resistance. ZrC layer is oxygen getter. On the other hand, we have developed Code-B-2.5.2 for prediction of pressure vessel failure probabilities of SiC-tri-isotropic (TRISO) coated fuel particles for HTGRs under operation by modification of an existing code, Code-B-2. The main purpose of modification is preparation of applying code for CFPs of Pu-burner HTGR. In this report, basic formulae are described.

Journal Articles

Irradiation performance of HTGR fuel in WWR-K research reactor

Ueta, Shohei; Shaimerdenov, A.*; Gizatulin, S.*; Chekushina, L.*; Honda, Masaki*; Takahashi, Masashi*; Kitagawa, Kenichi*; Chakrov, P.*; Sakaba, Nariaki

Proceedings of 7th International Topical Meeting on High Temperature Reactor Technology (HTR 2014) (USB Flash Drive), 7 Pages, 2014/10

A capsule irradiation test with the high temperature gas-cooled reactor (HTGR) fuel is being carried out using WWR-K research reactor in the Institute of Nuclear Physics of the Republic of Kazakhstan (INP) to attain 100 GWd/t-U of burnup under normal operating condition of a practical small-sized HTGR. This is the first HTGR fuel irradiation test for INP in Kazakhstan collaborated with Japan Atomic Energy Agency (JAEA) in frame of International Science and Technology Center (ISTC) project. In the test, TRISO coated fuel particle with low-enriched UO $_{2}$ (less than 10% of $^{235}$ U) is used, which was newly designed by JAEA to extend burnup up to 100 GWd/t-U comparing with that of the HTTR (33 GWd/t-U). Both TRISO and fuel compact as the irradiation test specimen were fabricated in basis of the HTTR fuel technology by Nuclear Fuel Industries, Ltd. in Japan. A helium-gas-swept capsule and a swept-gas sampling device installed in WWR-K were designed and constructed by INP. The irradiation test has been started in October 2012 and will be completed up to the end of February 2015. The irradiation test is in the progress up to 69 GWd/t of burnup, and integrity of new TRISO fuel has been confirmed. In addition, as predicted by the fuel design, fission gas release was observed due to additional failure of as-fabricated SiC-defective fuel.

Journal Articles

R&D plan for development of oxidation-resistant graphite and investigation of oxidation behavior of SiC coated fuel particle to enhance safety of HTGR

Ueta, Shohei; Sumita, Junya; Shibata, Taiju; Aihara, Jun; Fujita, Ichiro*; Ohashi, Jun*; Nagaishi, Yoshihide*; Muto, Takenori*; Sawa, Kazuhiro; Sakaba, Nariaki

Nuclear Engineering and Design, 271, p.309 - 313, 2014/05

https://doi.org/10.1016/j.nucengdes.2013.11.052

Times Cited Count：9 Percentile：54.64(Nuclear Science & Technology)

A new concept of the high temperature gas-cooled reactor (HTGR) is proposed as a challenge to assure no event sequences to the harmful release of radioactive materials even when the design extension conditions (DECs) occur by deterministic approach based on the inherent safety features of the HTGR. The air/water ingress accident, one of the DECs for the HTGR, is prevented by additional measures (e.g. facility for suppression to air ingress). With regard to the core design, it is important to prevent recriticality accidents by keeping the geometry of the fuel rod which consists of the graphite sleeve, fuel compact and SiC-TRISO (TRIstructural-ISOtropic) coated fuel particle, and by improving the oxidation resistance of the graphite when air/water ingress accidents occur. Therefore, it is planned to develop the oxidation-resistant graphite, which is coated with gradient SiC layer. It is also planned that the experimental identification of the condition to form the stable oxide layer (SiO $_{2}$ ) for SiC layer on the oxidation-resistant graphite and on the SiC-TRISO fuel. This paper describes the R&D plan for un-irradiation and irradiation test under simulating air/water ingress accident condition to develop oxidation-resistant graphite and to investigate the oxidation behavior of SiC coated fuel particle.

Journal Articles

Reprocessing technologies of the High Temperature Gas-cooled Reactor (HTGR) fuel

Sumita, Junya; Ueta, Shohei; Kunitomi, Kazuhiko; Yoshimuta, Shigeharu*; Sawa, Kazuhiro

Nihon Genshiryoku Gakkai Wabun Rombunshi, 2(4), p.546 - 554, 2003/12

https://doi.org/10.3327/taesj2002.2.546

A High Temperature Gas-Cooled Reactor (HTGR) is particularly attractive due to capability of producing high temperature helium gas and its inherent safety characteristic. Research and development of high temperature gas turbine plant and high temperature heat utilizing technology are now undergoing. The High Temperature Engineering Test Reactor (HTTR) is a research facility constructed by the Japan Atomic Energy Research Institute. This paper describes reprocessing technology of HTGR fuels. Coated fuel particles, consisted of a microsphere of low enriched UO $_{2}$ with TRISO particles, are used as the HTGR fuels. In order to reprocess HTGR fuels, a head-end process is needed and JAERI had confirmed jet-grind method as basic technologies of the head-end process. Since Purex method can be used after the head-end process, a reprocessing system for the HTGR fuels could be established. Also the preliminary study on the methodology for disposing graphite blocks in a HTGR was carried out, and its evaluation results were briefly presented.

Journal Articles