Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kojima, Kensuke; Okajima, Shigeaki; Yamane, Tsuyoshi; Ando, Masaki; Kataoka, Masaharu*; Iwanaga, Kohei
JAERI-Tech 2004-016, 38 Pages, 2004/03
JAERI-Tech-2004-016.pdf:1.46MB
To investigate the void coefficient in the Reduced-Moderation Water Reactor (RMWR), an infinite multiplication factor was measured in the FCA-XXII-1 (65V) core. Axial and radial fission rate distributions were measured by micro fission chambers with four different kinds of nuclides. The infinite multiplication factor was derived from the material buckling, which was obtained from both the axial and radial fission rate distributions, and the migration area calculated. The value of it in the test region of the FCA-XXII-1 (65V) core was 1.344
0.034. It was compared with the calculation, the ratio of the calculation to the measurement was 1.0080.026. The improvement in measurement accuracy was also considered.
Shelley, A.; Kugo, Teruhiko; Shimada, Shoichiro*; Okubo, Tsutomu; Iwamura, Takamichi
JAERI-Research 2004-002, 47 Pages, 2004/03
JAERI-Research-2004-002.pdf:3.08MB
Neutronic study has been done for a PWR-type reduced-moderation water reactor with seed-blanket fuel assemblies to achieve a high conversion ratio, a negative void coefficient and a high burnup by using a MOX fuel. The results of the precise assembly burnup calculations show that the recommended numbers of seed and blanket layers are 15(S15) and 5(B5), respectively. By the optimization of axial configuration, the S15B5 assembly with the seed of 1000
2 mm high, internal blanket of 150 mm high and axial blanket of 4002 mm high is recommended. In this configuration, the conversion ratio is 1.0 and the core average burnup is 38 GWd/t. The S15B5 assembly can attain the core average burnup of 45 GWd/t by decreasing the height of seed to 5002 mm, however, the conversion ratio becomes 0.97. The void and fuel temperature coefficients are negative for both of the configurations. Effect of metal or T-MOX (PuO
+ThO) fuel has been also investigated. Metal improves the conversion ratio but makes the void coefficient worse. T-MOX improves the void coefficient, but decreases the conversion ratio.
Shelley, A.; Shimada, Shoichiro*; Kugo, Teruhiko; Okubo, Tsutomu; Iwamura, Takamichi
Nuclear Engineering and Design, 224(3), p.265 - 278, 2003/10
Times Cited Count：15 Percentile：68.18(Nuclear Science & Technology)Parametric studies have been done for a PWR-type reduced-moderation water reactor (RMWR) with seed-blanket fuel assembles to achieve a high conversion ratio, negative void reactivity coefficient and a high burnup. It was found that 50 to 60% of seed in a seed-blanket assembly has higher conversion ratio. The number of seed-blanket layers is 20, in which the number of seed layers is 15 and blanket layers is 5. The fuel assembly with the height of seed of 1000mm2, internal blanket of 150 mm and axial blanket of 400mm2 is recommended. The conversion ratio is 1.0 and the average burnup in core region is 38.2 GWd/t. The enrichment of fissile Pu is 14.6 wt%. The void coefficient is +21.8 pcm/% void, however, it is expected that the void coefficient will be negative if the radial neutron leakage is taken into account. It is also possible to use this fuel assembly for a high core averaged burnup of 45GWd/t, however, the height of seed must be 500mm2 to improve the void coefficient. The conversion ratio is 0.97 and void coefficient is +20.8 pcm/%void.
Okubo, Tsutomu; Takeda, Renzo*; Iwamura, Takamichi; Yamamoto, Kazuhiko*; Okada, Hiroyuki*
Proceedings of International Conference on Back-End of the Fuel Cycle: From Research to Solutions (GLOBAL 2001) (CD-ROM), 7 Pages, 2001/09
An advanced water-cooled reactor concept named the Reduced-Moderation Water Reactor (RMWR) has been proposed to attain a high conversion ratio more than 1.0 and to achieve the negative void reactivity coefficient. At present, several types of design concepts satisfying both the design targets have been proposed based on the evaluation for the fuel without fission products and minor actinides. In this paper, the feasibility of the RMWR core is investigated and confirmed for the plutonium multiple recycling under advanced reprocessing schemes with low decontamination factors as proposed for the FBR fuel cycle.
Akino, Fujiyoshi; Takeuchi, Motoyoshi; Ono, Toshihiko; Kaneko, Yoshihiko
Journal of Nuclear Science and Technology, 34(2), p.185 - 192, 1997/02
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)no abstracts in English
C-J.Jeong*; Okumura, Keisuke; ; Tanaka, Kenichi*
Journal of Nuclear Science and Technology, 27(6), p.515 - 523, 1990/06
no abstracts in English
Arigane, Kenji
JAERI-M 87-063, 133 Pages, 1987/04
no abstracts in English
