Wall conditioning and experience of the carbon-based first wall in JT-60U

Masaki, Kei; Yagyu, Junichi; Arai, Takashi; Kaminaga, Atsushi; Kodama, Kozo; Miya, Naoyuki; Ando, Toshiro; Hiratsuka, Hajime; Saido, Masahiro

Fusion Science and Technology (JT-60 Special Issue), 42(2-3), p.386 - 395, 2002/09

https://doi.org/10.13182/FST02-A235

The wall conditioning of JT-60U consists of the 300C baking, He-TDC, He-GDC, tokamak discharge cleaning and boronization. Using these methods, total pressure of the vacuum vessel reached finally 10 10 Pa. The oxygen impurity was decreased to 0.5%. The experience with the carbon-based first wall showed that taper shaping is effective to reduce the local heat concentration to the tile edges. The observed poloidal asymmetric deposition of carbon on the divertor region implies that the carbon impurity produced in the outer divertor contributes to the deposition on the inner divertor. In 1992 and 1993, the BC converted CFC tiles were installed in the outer divertor to reduce chemical sputtering of CFC tiles and oxygen impurity. The reduction was successfully demonstrated with the BC converted CFC tiles. In order to understand the tritium behavior in JT-60U, tritium in the first wall and the exhaust gas were measured. The estimated tritium inventory in the first wall was 50% of the generated tritium.

Advances in JT-60U facilities and its operation

Kimura, Toyoaki; JT-60 Team

16th IEEE/NPSS Symp. on Fusion Engineering (SOFE '95), 1, p.724 - 729, 1996/00

no abstracts in English

Material behavior of first wall in JT-60

Ando, Toshiro; Takatsu, Hideyuki; Nakamura, Hiroo; Yamamoto, Masahiro; ; Arai, Takashi; Kaminaga, Atsushi; ; Horiike, Hiroshi; Shimizu, Masatsugu; et al.

Kaku Yugo Kenkyu, 65(SPECIAL ISSUE), p.27 - 49, 1991/03

no abstracts in English

The Study of Discharge Cleaning in the JFT-2 Tokamak with Surface Observation by AES

; ; ; ;

JAERI-M 6647, 16 Pages, 1976/07

JAERI-M-6647.pdf:0.52MB

no abstracts in English