Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamashita, Kiyoto; Maki, Shota; Yokosuka, Kazuhiro; Fukui, Masahiro; Iemura, Keisuke
JAEA-Technology 2023-023, 97 Pages, 2024/03
The incinerator adopted to incineration room, Plutonium Waste Treatment Facility had been demonstrated since 2002 for developing technologies to reduce the volume of fire-resistant wastes such as vinyl chloride (represented by Polyvinyl chloride bags) and rubber gloves for Radio Isotope among radioactive solid wastes generated by the production of mixed oxide fuels. The incinerator, cooling tower, and processing pipes were replaced with a suspension period from 2018 to 2022, which fireproof materials on the inner wall of the incinerator was cracked and grown caused by hydrogen chloride generated when disposing of fire-resistant wastes. This facility consists of the waste feed process, the incineration process, the waste gas treatment process, and the ash removal process. We replaced the cooling tower in the waste gas treatment process from March 2020 to March 2021, and the incinerator in the incineration process from January 2021 to February 2022. In addition, samples were collected from the incinerator and the cooling tower during the removing and dismantling of the replaced devices, observed by Scanning Electron Microscope and X-ray microanalyzer, and analyzed by X-ray diffraction to investigate the corrosion and deterioration of them. This report describes the method of setting up the green house, the procedure for replacing them, and the results from analysis in corrosion and deterioration of the cooling tower and incinerator.
Task Force on Maintenance Optimization of Nuclear Facilities
JAEA-Technology 2022-006, 80 Pages, 2022/06
The Task force on maintenance optimization of nuclear facilities was organized in the Nuclear Science Research Institute (NSRI) of Japan Atomic Energy Agency (JAEA) since November 2020, in order to adequately respond to "the New nuclear regulatory inspection system since FY 2020" and to continuously improve the facility maintenance activities. In 2021, the task force has studied (1) optimization of the importance classification on maintenance and inspection of nuclear facilities, and (2) improvement in setting and evaluation of the performance indicators on safety, maintenance and quality management activities, considering "the Graded approach" that is one of the basic methodologies in the new nuclear regulatory inspection system. Each nuclear facility (research reactors, nuclear fuel material usage facilities, others) in the NSRI will steadily improve their respective safety, maintenance and quality management activities, referring the review results suggested by the task force.
Nomura, Kazunori; Ogi, Hiromichi*; Nakahara, Masaumi; Watanabe, So; Shibata, Atsuhiro
International Journal of Nuclear and Quantum Engineering (Internet), 13(5), p.209 - 212, 2019/00
Morita, Kenji; Morimoto, Makoto; Hisada, Masaki; Fukui, Yasutaka
JAEA-Technology 2015-038, 30 Pages, 2016/02
The Old Waste Treatment Facility for JOYO (Old JWTF) has been operated to treat radioactive liquid waste from the experimental fast reactor JOYO and post irradiation examination facilities. Operation of Old JWTF stopped in 1995, and dismantling & decontamination method has discussed. As a response to discussion results of remote and dismantling method in high dose environment on 2013, its concept examination was discussed on 2014. Results are follows. As a cutting tool for Old JWTF equipment, wire saw is selected from cutting ability (speed and thickness of objects). Discussed the component technology of wire saw remote operation system (handling, monitoring, collection method of secondary waste, else).
Nishimura, Mitsuhiro
Genshiryoku Kogyo, 38(4), p.29 - 31, 1992/04
no abstracts in English
JAERI-M 83-218, 112 Pages, 1983/12
no abstracts in English
Sato, Fuminori; Horiguchi, Kenichi; Yamashita, Masaaki; Kojima, Junji
no journal, ,
no abstracts in English
Yamashita, Masaaki; Sato, Fuminori; Horiguchi, Kenichi; Kojima, Junji; Sakai, Etsuo*; Atarashi, Daiki*; Kadota, Hirofumi*
no journal, ,
no abstracts in English