Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Gunji, Satoshi; Tonoike, Kotaro; Clavel, J.-B.*; Duhamel, I.*
Journal of Nuclear Science and Technology, 58(1), p.51 - 61, 2021/01
Times Cited Count:2 Percentile:19.64(Nuclear Science & Technology)The new critical assembly STACY will be able to contribute to the validation of criticality calculations related to the fuel debris. The experimental core designs are in progress in the frame of JAEA/IRSN collaboration. This paper presents the method applied to optimize the design of the new STACY core to measure the criticality characteristics of pseudo fuel debris that simulated Molten Core Concrete Interaction (MCCI) of the fuel debris. To ensure that a core configuration is relevant for code validation, it is important to evaluate the reactivity worth of the main isotopes of interest and their k sensitivity to their cross sections. In the case of the fuel debris described in this study, especially for the concrete composition, silicon is the nucleus with the highest k sensitivity to the cross section. For this purpose, some parameters of the core configuration, as for example the lattice pitches or the core dimensions, were adjusted using optimization algorithm to find efficiently the optimal core configurations to obtain high sensitivity of silicon capture cross section. Based on these results, realistic series of experiments for fuel debris in the new STACY could be defined to obtain an interesting feedback for the MCCI. This methodology is useful to design other experimental conditions of the new STACY.
Hirota, Noriaki; Shibata, Hiroshi; Takeuchi, Tomoaki; Otsuka, Noriaki; Tsuchiya, Kunihiko
Journal of Nuclear Science and Technology, 57(12), p.1276 - 1286, 2020/12
Times Cited Count:0 Percentile:0.00(Nuclear Science & Technology)The influence of materials of mineral-insulated (MI) cables on their electrical characteristics upon exposure to high-temperature conditions was examined via a transmission test, in the objective of achieving the stability of the potential distribution along the cable length. Occurrence of a voltage drop along the cable was confirmed for aluminum oxide (AlO) and magnesium oxide (MgO), as insulating materials of the MI cable. A finite-element method (FEM)-based analysis was performed to evaluate the leakage in the potentials, which was found at the terminal end. Voltage drop yields by the transmission test and the analysis were in good agreement for the MI cable of AlO and MgO materials, which suggests the reproducibility of the magnitude relationship of the experimental results via the FEM analysis. To suppress the voltage drop, the same FEM analysis was conducted, the diameter of the core wires () and the distance between them () were varied. Considering the variation of , the potential distribution in the MI cable produced a minimum voltage drop corresponding to a ratio of 0.35, obtained by dividing with that of the insulating material (). In case of varying , a minimum voltage drop was l/ of 0.5.
Narukawa, Takafumi; Yamaguchi, Akira*; Jang, S.*; Amaya, Masaki
Proceedings of 14th International Conference on Probabilistic Safety Assessment and Management (PSAM-14) (USB Flash Drive), 10 Pages, 2018/09
Partitioning and Transmutation Technology Division, Nuclear Science and Engineering Center
JAEA-Technology 2017-033, 383 Pages, 2018/02
JAEA is pursuing research and development (R&D) on volume reduction and mitigation of degree of harmfulness of high-level radioactive waste. Construction of Transmutation Experimental Facility (TEF) is under planning as one of the second phase facilities in the Japan Proton Accelerator Complex (J-PARC) program to promote R&D on the transmutation technology with using accelerator driven systems (ADS). The TEF consists of two facilities: ADS Target Test Facility (TEF-T) and Transmutation Physics Experimental Facility (TEF-P). Development of spallation target technology and study on target materials are to be conducted in TEF-T with impinging a high intensity proton beam on a liquid lead-bismuth eutectic target. Whereas in TEF-P, by introducing a proton beam to minor actinide loaded cores, reactor physical properties of the cores are to be studied, and operation experiences of ADS are to be acquired. This report summarizes results of safety design for establishment permit of one of two TEF facilities, TEF-P.
Shiroya, Seiji*; Misawa, Tsuyoshi*; Unesaki, Hironobu*; Ichihara, Chihiro*; Kobayashi, Keiji*; Nakamura, Hiroshi*; Shin, Kazuo*; Imanishi, Nobutsugu*; Kanazawa, Satoshi*; Mori, Takamasa
JAERI-Tech 2004-025, 93 Pages, 2004/03
In view of the future plan of Research Reactor Institute, Kyoto University, the present study consisted of (1) the transmission experiments of high energy neutrons through materials, (2) experimental simulation of ADSR using the Kyoto University Critical Assembly(KUCA), and (3) conceptual neutronics design study on KUR type ADSR using the MCNP-X code. Through the present study, valuable knowledge on the basic nuclear characteristics of ADSR, which is indispensable to promote the study on ADSR, was obtained both theoretically and experimentally. For the realization of ADSR, it is considered to be necessary to accumulate results of research steadily. For this purpose, it is inevitable (1) to compile the more precise nuclear data for the wide energy range, (2) to establish experimental techniques for reactor physics study on ADSR including subcriticality measurement and absolute neutron flux measurement, and (3) to develop neutronics calculation tools which take into account the neutron generation process by the spallation reaction and the delayed neutron behavior.
Oyama, Yukio; Konno, Chikara; Ikeda, Yujiro; Maekawa, Fujio; Maekawa, Hiroshi; ; ; Nakamura, Tomoo; M.A.Abdou*; Bennett, E. F.*; et al.
Fusion Technology, 28(1), p.56 - 73, 1995/08
no abstracts in English
; Sakamoto, Yukio
Journal of Nuclear Science and Technology, 30(9), p.926 - 945, 1993/09
Times Cited Count:0 Percentile:0.00(Nuclear Science & Technology)no abstracts in English
;
Journal of Nuclear Science and Technology, 24(1), p.1 - 11, 1987/01
Times Cited Count:6 Percentile:55.33(Nuclear Science & Technology)no abstracts in English
Nuclear Science and Engineering, 97, p.145 - 160, 1987/00
Times Cited Count:2 Percentile:29.53(Nuclear Science & Technology)no abstracts in English
; ; ; ; ; ; ; Iida, Hiromasa
JAERI-M 83-174, 38 Pages, 1983/10
no abstracts in English