Magnetic layer thickness influence on magnetoelastic properties anisotropy in CoFeMnSi heusler alloy thin films

Nabialek, A.*; Chumak, O.*; 関 剛斎*; 高梨 弘毅; Baczewski, L. T.*; Szymczak, H.*

IEEE Transactions on Magnetics, 59(11), p.2501405_1 - 2501405_5, 2023/11

https://doi.org/10.1109/TMAG.2023.3287324

The anisotropic magnetoelastic (ME) properties of epitaxial CoFeMnSi(CFMS) Heusler alloy thin films with thicknesses ranging from 8 to 100 nm were investigated using the strain-modulated ferromagnetic resonance (SMFMR) technique. The calculation of the first cubic magnetocrystalline (MC) constant and the two cubic ME constants and was carried out assuming the cubic symmetry of the magnetic layer. A significant negative perpendicular MC anisotropy, of the order of 10 J/m, was also observed. The investigated parameters were found to be dependent on the thickness of the magnetic layer. The thinnest magnetic layers showed the strongest cubic MC anisotropy and the weakest anisotropy of ME properties. These findings highlight the importance of considering the magnetic layer thickness when evaluating the anisotropy in the ME properties of Heusler alloy thin films.

Measurement of thermal deformation of magnetic alloy cores of radio frequency cavities in 3-GeV rapid-cycling synchrotron of Japan Proton Accelerator Research Complex

島田 太平; 野村 昌弘; 田村 文彦; 山本 昌亘; 杉山 泰之*; 大森 千広*; 長谷川 豪志*; 原 圭吾*; 吉井 正人*

Nuclear Instruments and Methods in Physics Research A, 875, p.92 - 103, 2017/12

https://doi.org/10.1016/j.nima.2017.08.039

Magnetic alloy cores loaded in radio frequency cavities are employed to achieve a high field gradient in the 3-GeV Rapid-Cycling Synchrotron of the Japan Proton Accelerator Research Complex. We use three core-types, which were manufactured in three different processes. Buckling occurred in some cores of only one of the three core types. In order to find out the mechanism of buckling, we measured thermal deformations of the two core types, which had not buckled and the core types, which had buckled, while changing their temperatures by RF heating in air. Furthermore, we calculated the thermal stress using the results of the experiments. These experiments yielded that there was no remarkable difference in the strength of thermal stress between the core types, which had not buckled, and the core types, which had buckled; however, that there was a clear difference in the behavior of thermal deformations. The local deformations appeared, when a certain temperature was exceeded, and accelerated with temperature rise in the buckled core types. This was not seen with core types that didn't show the buckling problem. We conclude that the repetition of these catastrophic and local deformations, which are accelerated with the temperature rises, lead to the buckling. This result contributes to the stable operation of RCS.

EXAFS study on local structural changes in amorphous Fe-Zr-B alloys

中田 芳幸*; 原 尚之*; 広津 禎彦*; 江村 修一*; 牧野 彰宏*; 宇留賀 朋哉*; 原田 誠*; 西畑 保雄; 米田 安宏; 久保園 芳博*

Japanese Journal of Applied Physics, 38(Suppl.38-1), p.404 - 407, 1999/06

非晶質合金Fe-Zr(7at%)-B(3at%)と693K及び773Kにて1時間熱処理された試料について、局所構造の変化を明らかにするために、Zr-K吸収端でのEXAFSスペクトルを調べた。解析により次のことが示された。Fe-Zr及びZr-Zrの原子間距離は熱処理によって伸び、FeZrまたはFeZr金属間化合物での原子間距離に近付く。この原子間距離の変化は中距離の秩序化したクラスターが熱処理中に成長していることを示唆している。

第1壁の簡易交換に関する調査

立川 克浩; 堀江 知義; 関 泰; 藤沢 登; 近藤 光昇*; 内田 高穂*

JAERI-M 89-084, 69 Pages, 1989/07

JAERI-M-89-084.pdf:1.35MB

次期大型装置(FER)の第1壁を迅速かつ容易に交換する遠隔操作技術は重要な技術課題のひとつである。遠隔操作技術は炉本体構造と密接な関係があり、両者の整合性を十分に配慮する必要がある。本報告(昭和63年度委託調査)は、従来から提案されてきた第1壁アーマタイルの構造、特性および交換方法などを調査した。調査の重点は形状記憶合金(SMA)の適用など迅速に交換可能なタイル締結構造、健全性点検法および点検・交換システム概念の検討に絞った。この技術は今後さらに検討の深度を高めるため継続する必要があり、また適時に部分的モックアップにより設計の検証を行うことが不可欠である。