Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
neutron diffractionNaeem, M.*; Ma, Y.*; Knowles, A. J.*; Gong, W.; Harjo, S.; Wang, X.-L.*; Romero Resendiz, L.*; 他6名*
Materials Science & Engineering A, 916, p.147374_1 - 147374_8, 2024/11
被引用回数：3 パーセンタイル：57.76(Nanoscience & Nanotechnology)Heterostructured materials (HSMs) improve the strength-ductility trade-off of alloys, but their cryogenic performance under real-time deformation is unclear. We studied heterostructured CrCoNi medium-entropy alloy via neutron diffraction at 77 K and 293 K. A significant mechanical mismatch between fine and coarse grains led to an exceptional yield strength of 918 MPa at 293 K, increasing to 1244 MPa at 77 K with a uniform elongation of 34%. This strength-ductility synergy at 77 K is attributed to high dislocation pile-up density, increased planar faults, and martensitic transformation. Compared to homogeneous alloys, HSMs show promise for enhancing cryogenic mechanical performance in medium-/high-entropy alloys.
Kwon, H.*; Sathiyamoorthi, P.*; Gangaraju, M. K.*; Zargaran, A.*; Wang, J.*; Heo, Y.-U.*; Harjo, S.; Gong, W.; Lee, B.-J.*; Kim, H. S.*
Acta Materialia, 248, p.118810_1 - 118810_12, 2023/04
被引用回数：54 パーセンタイル：99.28(Materials Science, Multidisciplinary)Maraging steels, known for ultrahigh strength and good fracture toughness, derive their superior properties from lath martensite structure with high-density nanoprecipitates. In this work, we designed a novel Fe-based medium-entropy alloy with a chemical composition of Fe
Co
Ni
Mo
in atomic% by utilizing the characteristics of the maraging steels. By a single-step aging of only 10 min at 650 
C, the alloy showed microstructures consisting of a very high number density of (Fe, Co, Ni)
Mo
-type nanoprecipitates in lath martensite structure and reverted FCC phase, which led to ultrahigh yield strength higher than 2 GPa. This work demonstrates a novel direction to produce strong and ductile materials by expanding the horizons of material design with the aid of high-entropy concept and overcoming the limits of conventional materials.
CoNiAl
TiMo medium-entropy alloy; In situ neutron diffraction analysisKwon, H.*; Harjo, S.; 川崎 卓郎; Gong, W.; Jeong, S. G.*; Kim, E. S.*; Sathiyamoorthi, P.*; 加藤 秀実*; Kim, H. S.*
Science and Technology of Advanced Materials, 23(1), p.579 - 586, 2022/00
被引用回数：12 パーセンタイル：64.20(Materials Science, Multidisciplinary)Metastability engineering is a strategy to enhance the strength and ductility of alloys via deliberately lowering phase stability and prompting deformation-induced martensitic transformation. In this work, the martensitic transformation and its effect on the mechanical response of a FeCoNiAlTiMo medium-entropy alloy (MEA) were studied by in situ neutron diffraction under tensile loading. This work shows how great a role FCC to BCC martensitic transformation can play in enhancing the mechanical properties of ferrous MEAs.
neutron diffraction study of phase stress evolution in a ferrous medium-entropy alloy under low-temperature tensile loadingBae, J. W.*; Kim, J. G.*; Park, J. M.*; Woo, W.*; Harjo, S.; Kim, H. S.*
Scripta Materialia, 165, p.60 - 63, 2019/05
被引用回数：42 パーセンタイル：86.91(Nanoscience & Nanotechnology)Phase stress evolution of face-centered cubic (FCC) and deformation-induced body-centered cubic (BCC) phases was measured in recently developed ferrous medium-entropy alloy. This was done during tensile deformation at -137C using neutron diffraction measurement for the quantitative interpretation of the role of martensitic transformation on the improved low-temperature tensile properties. The strain-hardening rate curve exhibits two-stage hardening behavior, and the phase stress and stress contribution from the BCC phase increases significantly while that from FCC phase decreases during plastic deformation. This is a direct demonstration that BCC phase contributes significantly to the increase in strength and strain hardening.
