Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
廃炉環境国際共同研究センター; 札幌大学*
JAEA-Review 2025-033, 71 Pages, 2025/11
日本原子力研究開発機構(JAEA)廃炉環境国際共同研究センター(CLADS)では、令和5年度英知を結集した原子力科学技術・人材育成推進事業(以下、「本事業」という。)を実施している。本事業は、東京電力ホールディングス株式会社福島第一原子力発電所(1F)の廃炉等をはじめとした原子力分野の課題解決に貢献するため、国内外の英知を結集し、様々な分野の知見や経験を従前の機関や分野の壁を越えて緊密に融合・連携させた基礎的・基盤的研究及び人材育成を推進することを目的としている。平成30年度の新規採択課題から実施主体を文部科学省からJAEAに移行することで、JAEAとアカデミアとの連携を強化し、廃炉に資する中長期的な研究開発・人材育成をより安定的かつ継続的に実施する体制を構築した。本研究は、令和5年度に採択された研究課題のうち「動画像からの特徴量抽出結果に基づいた高速3次元炉内環境モデリング」の令和5年度分の研究成果について取りまとめたものである。本研究は、1F廃炉に向けて、原子炉格納容器及び原子炉建屋内を調査する際に撮影した動画像を入力し、指定された時間、動画像から抽出された特徴量に応じて、周辺情報を補強した上で情報量が大きい立体復元手法を選択し、作業空間を3次元モデリングする研究開発を行う。令和5年度は、写真測量、深層学習に基づいた立体復元手法による解析から、良好な立体復元を得るための有効な撮影条件を抽出する手法及び少ないデータから指定された時間までに立体復元結果を生成できるように特徴量を抽出する手法の検証を行った。さらに、動画像から抽出された点群データをセグメンテーションに適用し、インスタンスラベルが付された部品に分類した。
中村 啓太; 羽成 敏秀; 松本 拓; 川端 邦明; 八代 大*
Journal of Robotics and Mechatronics, 36(1), p.115 - 124, 2024/02
During the decommissioning activities, a movie was shot inside the reactor building during the investigation of the primary containment vessel by applying photogrammetry, which is one of the methods for three-dimensional (3D) reconstruction from images, to the images from this movie, it is feasible to perform 3D reconstruction of the environment around the primary containment vessel. However, the images from this movie may not be suitable for 3D reconstruction because they were shot remotely by robots owing to limited illumination, high-dose environments, etc. Moreover, photogrammetry has the disadvantage of easily changing 3D reconstruction results by simply changing the shooting conditions. Therefore, this study investigated the accuracy of the 3D reconstruction results obtained by photogrammetry with changes in the camera angle of view under shooting conditions. In particular, we adopted 3D computer graphics software to simulate shooting target objects for 3D reconstruction in a dark environment while illuminating them with light for application in decommissioning activities. The experimental results obtained by applying artificial images generated by simulation to the photogrammetry method showed that more accurate 3D reconstruction results can be obtained when the camera angle of view is neither too wide nor too narrow when the target objects are shot and surrounded. However, the results showed that the accuracy of the obtained results is low during linear trajectory shooting when the camera angle of view is wide.
中村 啓太*; 馬場 啓多*; 渡部 有隆*; 松本 拓; 羽成 敏秀; 川端 邦明
no journal, ,
本研究では、QRコードを用いた写真測量による立体復元結果の部分間レジストレーションによる統合手法を提案する。写真測量で獲得した復元結果は、復元ごとにスケーリングが異なるため統合が困難である。この問題を解決するために、大きさが既知のQRコードを復元対象環境に配置し、QRコードの大きさに基づいて復元結果をスケーリングし、スケーリングした復元結果をQRコードのマーカに基づいて統合する。本提案手法を検証するため、全画像から復元した結果と複数の復元結果を統合した結果の精度を比較した。検証結果から、精度を維持しつつ写真測量による3Dマッピングに要する時間の短縮に有効であることが示された。