Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Motooka, Takafumi; Ueno, Fumiyoshi; Yamamoto, Masahiro
Proceedings of 2016 EFCOG Nuclear & Facility Safety Workshop (Internet), 6 Pages, 2016/09
At the Fukushima Daiichi nuclear accident, seawater was injected into spent fuel pools of Unit 2-4 for the emergency cooling. Seawater might cause localized corrosion of spent fuel cladding. This would lead to leakage of not only fissile materials but also fission products from fuel cladding. The behavior, however, is not understood well. In this paper, the effects of seawater on corrosion behavior and mechanical property of were studied by using a spent fuel cladding from a BWR. We immersed the spent cladding tubes in diluted artificial seawater for 300h at 353 K, and conducted their visual, cross-sectional and strength examinations. As a localized corrosion index, the pitting potentials of specimens fabricated from the cladding were measured as functions of chloride ion concentration ranging from 20 to 2500 ppm. The visual examination showed that localized corrosion has not occurred, and cross-sectional examination showed no cracks. The strength of immersed tubes was comparable to that of non-immersed tubes. Additionally, pitting potential could not be measured over 1.0 V; pitting corrosion was hardly occurred. These results suggested that the specimens from the spent fuel cladding tube was very resistant to localized corrosion.
Kato, Chiaki; Sato, Tomonori; Ueno, Fumiyoshi; Yamagishi, Isao
Proceedings of 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Vol.2, p.1357 - 1374, 2016/05
With respect to the long-term storage of the zeolite-containing spent Cs adsorption vessels used at the Fukushima Daiichi Nuclear Power Station, the corrosion of the vessel material is one of the most important issues. In this study, we performed electrochemical tests on stainless steel specimens in zeolite-containing artificial seawater under gamma-ray irradiation. The spontaneous potential ESP and critical pitting potential VC of the type 316L steel in systems in contact with various zeolites were measured in order to evaluate the corrosion resistance of the steel. In addition, the water sample was analyzed after being irradiated, in order to determine the concentrations of various dissolved oxidants such as oxygen and hydrogen peroxide, which can accelerate the corrosion process. The steady-state rest potential increased with an increase in the dose rate; however, the increase was suppressed in contact with the zeolites. The VC value of the steel when in contact with the zeolites was slightly smaller than the VC value in bulk water; however, the choice of the zeolite used as herschelite, IE96 and IE911 hardly affect the VC value. The concentration of H
O in the bulk water under irradiation also increased with the increase in the dose rate. This increase was suppressed in the systems in contact with the zeolites, owing to the decomposition of the HO by the zeolites. A clear relationship was observed between ESP and the HO concentration. As contact with the zeolites caused the increase in ESP under irradiation to be suppressed, it can be concluded that the presence of zeolites in the spent Cs adsorption vessels can reduce the probability of the localized corrosion of the stainless steel in the vessels.
-ray irradiationKato, Chiaki; Sato, Tomonori; Nakano, Junichi; Ueno, Fumiyoshi; Yamagishi, Isao
Proceedings of 2014 Nuclear Plant Chemistry Conference (NPC 2014) (USB Flash Drive), 9 Pages, 2014/10
As a part of consideration for long-term storage of spent zeolite adsorption vessels in the Fukushima Daiichi Nuclear Power Station, corrosion of vessel material in the spent zeolite adsorption vessel is one of important issue. We performed electrochemical tests of stainless steel (type 316L) in the zeolite containing artificial seawater under -ray irradiation. Steady spontaneous potential (Esp) and pitting potential (VC), of type 316L was measurement. 
Co -rays source was used under irradiation. Dose rate of -ray irradiation was controlled for 5 kGy/h and 400 Gy/h. In anode polarization curves, there was no clear difference under irradiation and non-irradiation. The corrosion potential of type 316L increased with increasing time after -ray irradiation. The Esp was shifted to nobler by -rays irradiation, while increasing Esp was suppressed by contacted with zeolite.