Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hirooka, Shun; Vauchy, R.; Horii, Yuta; Sunaoshi, Takeo*; Saito, Kosuke
Proceedings of TopFuel 2025; Nuclear Reactor Fuel Performance Conference (Internet), 10 Pages, 2025/10
Reducing the oxygen-to-metal (O/M) ratio in MOX fuels plays an important role in suppressing the corrosion depth in the cladding due to fuel-cladding chemical interaction (FCCI), which is the key to determining the lifetime of fast reactor MOX fuels. Owing to a number of irradiation and post-irradiation experiments, a clear decreasing trend in the corrosion depth with lower O/M ratio in the as-fabricated MOX pellet was reported, whereas a significant redistribution of the O/M ratio in a pellet driven by the radial temperature gradient during irradiation could supply a higher oxygen potential near the pellet periphery where the FCCI should occur. The reduction of the O/M ratio in the MOX pellet fabrication processes can be achieved by heat treatment by taking high temperature, longer time, and lower oxygen partial pressure in the gas into account; the properties governing the reduction are not sufficiently studied. This study demonstrated the variation of O/M ratio in MOX pellets and the in-situ O/M ratio during the heat treatment was analyzed by using a thermogravimeter, which revealed a decreasing behavior during heating and dwell as well as an increasing behavior in the O/M ratio during the cooling step. Furthermore, the redistribution of O/M ratio, analyzed by Sari's model, was discussed to investigate the O/M ratio and the oxygen potential near the pellet periphery which is likely to have a more direct influence on the FCCI than the as-fabricated O/M ratio. By using the recent oxygen potential data on MOX, it is found that the oxygen potential profile in the radial direction is especially drastic near the pellet periphery and is sensitive to the as-fabricated O/M ratio.
Hirooka, Shun; Vauchy, R.; Horii, Yuta; Sunaoshi, Takeo*; Saito, Kosuke; Ozawa, Takayuki
Proceedings of Workshop on Fuel Performance Assessment and Behaviour for Liquid Metal Cooled Fast Reactors (Internet), 8 Pages, 2025/07
no abstracts in English
Hirooka, Shun; Yokoyama, Keisuke; Kato, Masato
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 8 Pages, 2022/04
Property studies on Am/Np-bearing MOX were carried out and how the properties influences on the irradiation behaviors was discussed. Both Am and Np inclusions increase the oxygen potential of MOX. Inter-diffusion coefficients obtained by using diffusion couple technique indicate that the inter-diffusion coefficient is larger in the order of U-Am, U-Pu and U-Np. Also, the inter-diffusion coefficients were evaluated to be larger at the O/M = 2 than those of O/M 
2 by several orders. The increase of oxygen potential with Am/Np leads to higher vapor pressure of UO
and the acceleration of the pore migration along temperature gradient during irradiation. The redistributions of actinide elements were also considered with the relationship of the pore migration and diffusion in solid state. Thus, the obtained inter-diffusion coefficients directly influence on the redistribution rate. The obtained properties were modelled and can be installed in a fuel irradiation simulation code.
Hirooka, Shun; Kato, Masato; Watanabe, Masashi
Transactions of the American Nuclear Society, 118, p.1624 - 1626, 2018/06
This study suggested the time development of oxygen-to-metal ratio (O/M) redistribution model with oxygen-related properties in MOX. Irradiation simulation including the suggested O/M redistribution and pore migration with vaporization-condensation model which bares density redistribution was demonstrated. The simulation results showed that O/M redistribution proceeded at lower temperature than density redistribution, which indicated that oxygen diffusion got influential at lower temperature than vaporization-condensation of MOX. Another find was that O/M redistribution was very slow at the surface because temperature kept low. However, near the surface (inside from the surface) where the temperature exceeded 1000 K, O/M redistribution was rather recognizable with oxygen flown from inner region to the near-surface. The results will be evaluated by comparison with post-irradiation examination data.
Shibata, Katsuyuki*; Onizawa, Kunio; Suzuki, Masahide; Li, Y.*
Nihon Kikai Gakkai M&M 2005 Zairyo Rikigaku Kanfarensu Koen Rombunshu, p.299 - 300, 2005/11
no abstracts in English
Takase, Kazuyuki; Hino, Ryutaro;
Nihon Genshiryoku Gakkai-Shi, 33(6), p.564 - 573, 1991/06
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)no abstracts in English
Ogawa, Toru; Iwai, Takashi;
J. Less-Common Met., 175, p.59 - 69, 1991/00
no abstracts in English
