Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Okumura, Yoshikazu; Gobin, R.*; Knaster, J.*; Heidinger, R.*; Ayala, J.-M.*; Bolzon, B.*; Cara, P.*; Chauvin, N.*; Chel, S.*; Gex, D.*; et al.
Review of Scientific Instruments, 87(2), p.02A739_1 - 02A739_3, 2016/02
Times Cited Count：7 Percentile：35.23(Instruments & Instrumentation)IFMIF is an accelerator based neutron facility having two set of linear accelerators each producing 125mA/CW deuterium ion beams (250mA in total) at 40MeV. The LIPAc (Linear IFMIF Prototype Accelerator) being developed in the IFMIF-EVEDA project consists of an injector, a RFQ accelerator, and a part of superconducting Linac, whose target is to demonstrate 125mA/CW deuterium ion beam acceleration up to 9MeV. The injector has been developed in CEA Saclay and already demonstrated 140mA/100keV deuterium beam. The injector was disassembled and delivered to the International Fusion Energy Research Center (IFERC) in Rokkasho, Japan, and the commissioning has started after its reassembly 2014; the first beam production has been achieved in November 2014. Up to now, 100keV/120mA/CW hydrogen ion beam has been produced with a low beam emittance of 0.2 
.mm.mrad (rms, normalized).
/D ion source for IFMIF (International Fusion Materials Irradiation Facility)Shinto, Katsuhiro; Sen
e, F.*; Ayala, J.-M.*; Bolzon, B.*; Chauvin, N.*; Gobin, R.*; Ichimiya, Ryo; Ihara, Akira; Ikeda, Yukiharu; Kasugai, Atsushi; et al.
Review of Scientific Instruments, 87(2), p.02A727_1 - 02A727_3, 2016/02
Times Cited Count：8 Percentile：39.15(Instruments & Instrumentation)Shinto, Katsuhiro; Ichikawa, Masahiro; Takahashi, Hiroki; Kondo, Keitaro; Kasugai, Atsushi; Gobin, R.*; Sene, F.*; Chauvin, N.*; Ayala, J.-M.*; Marqueta, A.*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.493 - 495, 2015/09
Development of the prototype accelerator (LIPAc) for the engineering validation of the International Fusion Materials Irradiation Facility (IFMIF) which is an accelerator driven neutron source has been progressed at Rokkasho. The LIPAc is a deuteron linear accelerator consisting of an injector, a radio-frequency quadrupole (RFQ) linac and a superconducting linac. The objective of LIPAc is to produce a CW beam with the energy and current of 9 MeV and 125 mA, respectively. The injector was developed at CEA/Saclay and succeeded to produce CW proton and deuteron beams of 100 keV/140 mA by autumn 2012. After the test at CEA/Saclay, the injector was shipped to the International Fusion Energy Research Centre (IFERC) in Rokkasho, Aomori and started to reassemble from the end of 2013. It was successfully produced proton beams in November 2014 at Rokkasho. While the ion source conditioning was done, the beam test was progressed. In this paper, the present status of the LIPAc injector at Rokkasho with some experimental results will be presented.
Okumura, Yoshikazu; Ayala, J.-M.*; Bolzon, B.*; Cara, P.*; Chauvin, N.*; Chel, S.*; Gex, D.*; Gobin, R.*; Harrault, F.*; Heidinger, R.*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.203 - 205, 2015/09
Under the framework of Broader Approach (BA) agreement between Japan and Euratom, IFMIF/EVEDA project was launched in 2007 to validate the key technologies to realize IFMIF. The most crucial technology to realize IFMIF is two set of linear accelerator each producing 125mA/CW deuterium ion beams up to 40MeV. The prototype accelerator, whose target is 125mA/CW deuterium ion beam acceleration up to 9MeV, is being developed in International Fusion Research Energy Center (IFERC) in Rokkasho, Japan. The injector developed in CEA Saclay was delivered in Rokkasho in 2014, and is under commissioning. Up to now, 100keV/120mA/CW hydrogen ion beams and 100keV/90mA/CW duty deuterium ion beams are successfully produced with a low beam emittance of 0.21 .mm.mrad (rms, normalized). Delivery of RFQ components will start in 2015, followed by the installation of RF power supplies in 2015.
Degueldre, C.*; Akie, Hiroshi; Boczar, P.*; Chauvin, N.*; Meyer, M.*; Troyanov, V.*
Proceedings of GLOBAL2003 Atoms for Prosperity; Updating Eisenhower's Global Vision for Nuclear Energy (CD-ROM), p.1967 - 1973, 2003/11
no abstracts in English
Scantamburlo, F.*; Knaster, J.*; Okumura, Yoshikazu; Kasugai, Atsushi; Shidara, Hiroyuki*; Chauvin, N.*; Gobin, R.*; Nghiem, P. A. P.*
no journal, ,
The Engineering Validation and Engineering Design Activities (EVEDA) phase of IFMIF aims at running a 9 MeV / 125 mA / CW deuteron accelerator to demonstrate the feasibility of IFMIF's 40 MeV / 125 mA / CW accelerator with components mainly designed and constructed in European labs. LEDA was operated successfully in 1999-2001 as a 6.7 MeV / 100 mA / CW proton accelerator with high availability. The present paper assesses the experience gained in LEDA and explains how LIPAc, the IFMIF prototype accelerator, is inheriting its role of breaking through technological boundaries.
Shinto, Katsuhiro; Kasugai, Atsushi; Kondo, Keitaro; Takahashi, Hiroki; Ichimiya, Ryo; Gobin, R.*; Sene, F.*; Bolzon, B.*; Chauvin, N.*; Valette, M.*; et al.
no journal, ,
no abstracts in English
