Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 32

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

${it In situ}$ neutron diffraction revealing the achievement of excellent combination of strength and ductility in metastable austenitic steel by grain refinement

Mao, W.; Gong, W.; Harjo, S.; Morooka, Satoshi; Gao, S.*; Kawasaki, Takuro; Tsuji, Nobuhiro*

Journal of Materials Science & Technology, 176, p.69 - 82, 2024/03

The yield stress of Fe-24Ni-0.3C (wt.%) metastable austenitic steel increased 3.5 times (158 $$rightarrow$$ 551 MPa) when the average grain size decreased from 35 $$mu$$m (coarse-grained [CG]) to 0.5 $$mu$$m (ultrafine-grained [UFG]), whereas the tensile elongation was kept large (0.87 $$rightarrow$$ 0.82). ${it In situ}$ neutron diffraction measurements of the CG and UFG Fe-24Ni-0.3C steels were performed during tensile deformation at room temperature to quantitatively elucidate the influence of grain size on the mechanical properties and deformation mechanisms. The initial stages of plastic deformation in the CG and UFG samples were dominated by dislocation slip, with deformation-induced martensitic transformation (DIMT) also occurring in the later stage of deformation. Results show that grain refinement increases the initiation stress of DIMT largely and suppresses the rate of DIMT concerning the strain, which is attributed to the following effects. (i) Grain refinement increased the stabilization of austenite and considerably delayed the initiation of DIMT in the $$<$$111$$>$$//LD (LD: loading direction) austenite grains, which were the most stable grains for DIMT. As a result, most of the $$<$$111$$>$$//LD austenite grains in the UFG specimens failed to transform into martensite. (ii) Grain refinement also suppressed the autocatalytic effect of the martensitic transformation. Nevertheless, the DIMT with the low transformation rate in the UFG specimen was more efficient in increasing the flow stress and more appropriate to maintain uniform deformation than that in the CG specimen during deformation. The above phenomena mutually contributed to the excellent combination of strength and ductility of the UFG metastable austenitic steel.

Journal Articles

Quantitatively evaluating the huge L$"u$ders band deformation in an ultrafine grain stainless steel by combining ${it in situ}$ neutron diffraction and digital image correlation analysis

Mao, W.; Gao, S.*; Gong, W.; Harjo, S.; Kawasaki, Takuro; Tsuji, Nobuhiro*

Scripta Materialia, 235, p.115642_1 - 115642_6, 2023/10

 Times Cited Count:0 Percentile:0

In the present study, a hybrid ${it in situ}$ neutron diffraction and digital image correlation measurement was performed on tensile deformation of an ultrafine grain (UFG) stainless steel exhibiting a huge L$"u$ders band deformation to evaluate the individual contribution of the austenite matrix and the deformation-induced martensite to the strain hardening during the propagation of the band. Quantitative analysis revealed that the strain hardening of the austenite matrix was insufficient to maintain a uniform deformation when the flow stress was greatly enhanced by the UFG structure. The strain hardening required for the L$"u$ders band to propagate was mostly provided by the formation of martensite and the high internal stress within it.

Journal Articles

Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel

Mao, W.; Gao, S.*; Gong, W.; Bai, Y.*; Harjo, S.; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*

Acta Materialia, 256, p.119139_1 - 119139_16, 2023/09

 Times Cited Count:0 Percentile:87.31

Transformation-induced plasticity (TRIP)-assisted steels exhibit an excellent combination of strength and ductility due to enhanced strain hardening rate associated with deformation-induced martensitic transformation (DIMT). Quantitative evaluation on the role of DIMT in strain hardening behavior of TRIP-assisted steels and alloys can provide guidance for designing advanced materials with strength and ductility synergy, which is, however, difficult since the phase composition keeps changing and both stress and plastic strain are dynamically partitioned among constituent phases during deformation. In the present study, tensile deformation with ${it in situ}$ neutron diffraction measurement was performed on an Fe-24Ni-0.3C (wt.%) TRIP-assisted austenitic steel. The analysis method based on stress partitioning and phase fractions measured by neutron diffraction was proposed, by which the tensile flow stress and the strain hardening rate of the specimen were resolved into factors associated with each phase, i.e., the austenite matrix, deformation-induced martensite, and the transformation rate of DIMT after differentiation, and then the role of each factor in the global strain hardening behavior was discussed. In addition, the plastic strain partitioning between austenite and martensite was indirectly estimated using the dislocation density measured by diffraction profile analysis, which constructed the full picture of stress and strain partitioning between austenite and martensite in the material. The results suggested that both the transformation rate and the phase stress borne by the deformation-induced martensite played important roles in the global tensile properties of the material. The proposed decomposition analysis method could be widely applied to investigating mechanical behavior of multi-phase alloys exhibiting the TRIP phenomenon.

Journal Articles

Multiple mechanisms in proton-induced nucleon removal at $$sim$$100 MeV/nucleon

Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; G$'o$mez-Ramos, M.*; Ogata, Kazuyuki*; Yoshida, Kazuki; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.

Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04

 Times Cited Count:2 Percentile:90.46(Physics, Multidisciplinary)

We report on the first proton-induced single proton- and neutron-removal reactions from the neutron deficient $$^{14}$$O nucleus with large Fermi-surface asymmetry at $$sim$$100 MeV/nucleon. Our results provide the first quantitative contributions of multiple reaction mechanisms including the quasifree knockout, inelastic scattering, and nucleon transfer processes. It is shown that the inelastic scattering and nucleon transfer, usually neglected at such energy regime, contribute about 50% and 30% to the loosely bound proton and deeply bound neutron removal, respectively.

Journal Articles

Grain refinement in titanium prevents low temperature oxygen embrittlement

Chong, Y.*; Gholizadeh, R.*; Tsuru, Tomohito; Zhang, R.*; Inoue, Koji*; Gao, W.*; Godfrey, A.*; Mitsuhara, Masatoshi*; Morris, J. W. Jr.*; Minor, A. M.*; et al.

Nature Communications (Internet), 14, p.404_1 - 404_11, 2023/02

 Times Cited Count:1 Percentile:93.17

Interstitial oxygen embrittles titanium, particularly at cryogenic temperatures, which necessitates a stringent control of oxygen content in fabricating titanium and its alloys. Here, we propose a structural strategy, via grain refinement, to alleviate this problem. Compared to a coarse-grained counterpart that is extremely brittle at 77K, the uniform elongation of an ultrafine-grained (UFG) microstructure (grain size $$sim$$2.0 $$mu$$m) in Ti-0.3wt.%O was successfully increased by an order of magnitude, maintaining an ultrahigh yield strength inherent to the UFG microstructure. This unique strength-ductility synergy in UFG Ti-0.3wt.%O was achieved via the combined effects of diluted grain boundary segregation of oxygen that helps to improve the grain boundary cohesive energy and enhanced $$<c+a>$$ dislocation activities that contribute to the excellent strain hardening ability. The present strategy could not only boost the potential applications of high strength Ti-O alloys at low temperatures, but could also be applied to other alloy systems, where interstitial solution hardening results into an undesirable loss of ductility.

Journal Articles

Hybridized propagation of spin waves and surface acoustic waves in a multiferroic-ferromagnetic heterostructure

Chen, J.*; Yamamoto, Kei; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Ma, J.*; Liu, S.*; Gao, P.*; et al.

Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02

 Times Cited Count:1 Percentile:92.2(Physics, Applied)

Journal Articles

New $$K$$ isomers in $$^{248}$$Cf

Orlandi, R.; Makii, Hiroyuki; Nishio, Katsuhisa; Hirose, Kentaro; Asai, Masato; Tsukada, Kazuaki; Sato, Tetsuya; Ito, Yuta; Suzaki, Fumi; Nagame, Yuichiro*; et al.

Physical Review C, 106(6), p.064301_1 - 064301_11, 2022/12

 Times Cited Count:0 Percentile:0.02(Physics, Nuclear)

Journal Articles

Rediscovery of Hall-Petch strengthening in bulk ultrafine grained pure Mg at cryogenic temperature; A Combined ${it in situ}$ neutron diffraction and electron microscopy study

Zheng, R.*; Gong, W.; Du, J.-P.*; Gao, S.*; Liu, M.*; Li, G.*; Kawasaki, Takuro; Harjo, S.; Ma, C.*; Ogata, Shigenobu*; et al.

Acta Materialia, 238, p.118243_1 - 118243_15, 2022/10

 Times Cited Count:9 Percentile:93.63(Materials Science, Multidisciplinary)

Journal Articles

Anisotropic magnon damping by zero-temperature quantum fluctuations in ferromagnetic CrGeTe$$_{3}$$

Chen, L.*; Mao, C.*; Chung, J.-H.*; Stone, M. B.*; Kolesnikov, A. I.*; Wang, X.*; Murai, Naoki; Gao, B.*; Delaire, O.*; Dai, P.*

Nature Communications (Internet), 13, p.4037_1 - 4037_7, 2022/07

 Times Cited Count:2 Percentile:56.14(Multidisciplinary Sciences)

Journal Articles

Status of the uncertainty quantification for severe accident sequences of different NPP-designs in the frame of the H-2020 project MUSA

Brumm, S.*; Gabrielli, F.*; Sanchez-Espinoza, V.*; Groudev, P.*; Ou, P.*; Zhang, W.*; Malkhasyan, A.*; Bocanegra, R.*; Herranz, L. E.*; Berda$"i$, M.*; et al.

Proceedings of 10th European Review Meeting on Severe Accident Research (ERMSAR 2022) (Internet), 13 Pages, 2022/05

Journal Articles

Non-destructive characterization of the spatial variation of $$gamma$$/$$gamma$$$$^{'}$$ lattice misfit in a single-crystal Ni-based superalloy by energy-resolved neutron imaging

Malamud, F.*; Santisteban, J. R.*; Gao, Y.*; Shinohara, Takenao; Oikawa, Kenichi; Tremsin, A.*

Journal of Applied Crystallography, 55(2), p.228 - 239, 2022/04

 Times Cited Count:1 Percentile:31.49(Chemistry, Multidisciplinary)

Journal Articles

Achieving excellent mechanical properties in type 316 stainless steel by tailoring grain size in homogeneously recovered or recrystallized nanostructures

Liu, M.*; Gong, W.; Zheng, R.*; Li, J.*; Zhang, Z.*; Gao, S.*; Ma, C.*; Tsuji, Nobuhiro*

Acta Materialia, 226, p.117629_1 - 117629_13, 2022/03

 Times Cited Count:28 Percentile:99.42(Materials Science, Multidisciplinary)

Journal Articles

Effective grain size refinement of an Fe-24Ni-0.3C metastable austenitic steel by a modified two-step cold rolling and annealing process utilizing the deformation-induced martensitic transformation and its reverse transformation

Mao, W.; Gao, S.*; Bai, Y.*; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*

Journal of Materials Research and Technology, 17, p.2690 - 2700, 2022/03

 Times Cited Count:7 Percentile:85.3(Materials Science, Multidisciplinary)

Metastable austenitic steels having ultrafine grained (UFG) microstructures can be fabricated by conventional cold rolling and annealing processes by utilizing the deformation-induced martensitic transformation during cold rolling and its reverse transformation to austenite upon annealing. However, such processes are not applicable when the austenite has high mechanical stability against deformation-induced martensitic transformation, since there is no sufficient amount of martensite formed during cold rolling. In the present study, a two-step cold rolling and annealing process was applied to an Fe-24Ni-0.3C metastable austenitic steel having high mechanical stability. Prior to the cold rolling, a repetitive subzero treatment and reverse annealing treatment were applied. Such a treatment dramatically decreased the mechanical stability of the austenite and greatly accelerated the formation of deformation-induced martensite during the following cold rolling processes. As a result, the grain refinement was significantly promoted, and a fully recrystallized specimen with a mean austenite grain size of 0.5 mm was successfully fabricated, which exhibited both high strength and high ductility.

Journal Articles

Long decay length of magnon-polarons in BiFeO$$_{3}$$/La$$_{0.67}$$Sr$$_{0.33}$$MnO$$_{3}$$ heterostructures

Zhang, J.*; Chen, M.*; Chen, J.*; Yamamoto, Kei; Wang, H.*; Hamdi, M.*; Sun, Y.*; Wagner, K.*; He, W.*; Zhang, Y.*; et al.

Nature Communications (Internet), 12, p.7258_1 - 7258_8, 2021/12

 Times Cited Count:10 Percentile:76.55(Multidisciplinary Sciences)

Journal Articles

Monitoring residual strain relaxation and preferred grain orientation of additively manufactured Inconel 625 by in-situ neutron imaging

Tremsin, A. S.*; Gao, Y.*; Makinde, A.*; Bilheux, H. Z.*; Bilheux, J. C.*; An, K.*; Shinohara, Takenao; Oikawa, Kenichi

Additive Manufacturing, 46, p.102130_1 - 102130_20, 2021/10

 Times Cited Count:6 Percentile:45.37(Engineering, Manufacturing)

Journal Articles

The $$^{59}$$Fe(n,$$gamma$$)$$^{60}$$Fe cross section from the surrogate ratio method and its effect on the $$^{60}$$Fe nucleosynthesis

Yan, S. Q.*; Li, X. Y.*; Nishio, Katsuhisa; Lugaro, M.*; Li, Z. H.*; Makii, Hiroyuki; Pignatari, M.*; Wang, Y. B.*; Orlandi, R.; Hirose, Kentaro; et al.

Astrophysical Journal, 919(2), p.84_1 - 84_7, 2021/10

 Times Cited Count:1 Percentile:9.31(Astronomy & Astrophysics)

Journal Articles

Calibration and optimization of Bragg edge analysis in energy-resolved neutron imaging experiments

Tremsin, A. S.*; Bilheux, H. Z.*; Bilheux, J. C.*; Shinohara, Takenao; Oikawa, Kenichi; Gao, Y.*

Nuclear Instruments and Methods in Physics Research A, 1009, p.165493_1 - 165493_12, 2021/09

 Times Cited Count:4 Percentile:58.42(Instruments & Instrumentation)

Journal Articles

Distance-selected topochemical dehydro-diels-alder reaction of 1,4-Diphenylbutadiyne toward crystalline graphitic nanoribbons

Zhang, P.*; Tang, X.*; Wang, Y.*; Wang, X.*; Gao, D.*; Li, Y.*; Zheng, H.*; Wang, Y.*; Wang, X.*; Fu, R.*; et al.

Journal of the American Chemical Society, 142(41), p.17662 - 17669, 2020/10

 Times Cited Count:17 Percentile:70.69(Chemistry, Multidisciplinary)

Solid-state topochemical polymerization (SSTP) is a promising method to construct functional crystalline polymeric materials, but in contrast to various reactions that happen in solution, only very limited types of SSTP reactions are reported. Diels-Alder (DA) and dehydro-DA (DDA) reactions are textbook reactions for preparing six-membered rings in solution but are scarcely seen in solid-state synthesis. Here, using multiple cutting-edge techniques, we demonstrate that the solid 1,4-diphenylbutadiyne (DPB) undergoes a DDA reaction under 10-20 GPa with the phenyl as the dienophile. The crystal structure at the critical pressure shows that this reaction is "distance-selected". The distance of 3.2${AA}$ between the phenyl and the phenylethynyl facilitates the DDA reaction, while the distances for other DDA and 1,4-addition reactions are too large to allow the bonding. The obtained products are crystalline armchair graphitic nanoribbons, and hence our studies open a new route to construct the crystalline carbon materials with atomic-scale control.

Journal Articles

Neutron diffraction monitoring of ductile cast iron under cyclic tension-compression

Harjo, S.; Kubota, Satoru*; Gong, W.*; Kawasaki, Takuro; Gao, S.*

Acta Materialia, 196, p.584 - 594, 2020/09

 Times Cited Count:12 Percentile:63.42(Materials Science, Multidisciplinary)

Journal Articles

High-field depinned phase and planar Hall effect in the skyrmion host Gd$$_2$$PdSi$$_3$$

Hirschberger, M.*; Nakajima, Taro*; Kriener, M.*; Kurumaji, Takashi*; Spitz, L.*; Gao, S.*; Kikkawa, Akiko*; Yamasaki, Yuichi*; Sagayama, Hajime*; Nakao, Hironori*; et al.

Physical Review B, 101(22), p.220401_1 - 220401_6, 2020/06

 Times Cited Count:35 Percentile:92.08(Materials Science, Multidisciplinary)

32 (Records 1-20 displayed on this page)