Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakamura, Makoto; Tobita, Kenji; Someya, Yoji; Uto, Hiroyasu; Sakamoto, Yoshiteru; Gulden, W.*
Nuclear Fusion, 55(12), p.123008_1 - 123008_7, 2015/12
Times Cited Count：15 Percentile：60.5(Physics, Fluids & Plasmas)Major in- and ex-vessel loss-of-coolant accidents (LOCAs) of a water-cooled tokamak fusion DEMO reactor have been analysed. Analyses have identified responses of the DEMO systems to these accidents and pressure loads to confinement barriers for radioactive materials. The thermohydraulic analysis results suggests that the in- and ex-vessel LOCAs crucially threaten integrity of the primary and final confinement barriers, respectively. As for the in-vessel LOCA, it was found that the pressure in the vacuum vessel reaches its design value due to the LOCA even though a pressure suppression system is in service. As for the ex-vessel LOCA, the pressure load to the tokamak hall due to the double-ended break of the primary cooling pipe was found to be so large that integrity of the hall was crucially challenged. Mitigations of the loads to the confinement barriers are also discussed.
Nakamura, Makoto; Tobita, Kenji; Gulden, W.*; Watanabe, Kazuhito*; Someya, Yoji; Tanigawa, Hisashi; Sakamoto, Yoshiteru; Araki, Takao*; Matsumiya, Hisato*; Ishii, Kyoko*; et al.
Fusion Engineering and Design, 89(9-10), p.2028 - 2032, 2014/10
Times Cited Count：13 Percentile：70.2(Nuclear Science & Technology)After the Fukushima Dai-ichi nuclear accident, a social need for assuring safety of fusion energy has grown gradually in the Japanese (JA) fusion research community. DEMO safety research has been launched as a part of BA DEMO Design Activities (BA-DDA). This paper reports progress in the fusion DEMO safety research conducted under BA-DDA. Safety requirements and evaluation guidelines have been, first of all, established based on those established in the Japanese ITER site invitation activities. The amounts of radioactive source terms and energies that can mobilize such source terms have been assessed for a reference DEMO, in which the blanket technology is based on the Japanese fusion technology R&D programme. Reference event sequences expected in DEMO have been analyzed based on the master logic diagram and functional FMEA techniques. Accident initiators of particular importance in DEMO have been selected based on the event sequence analysis.
Nakamura, Makoto; Tobita, Kenji; Someya, Yoji; Tanigawa, Hisashi; Gulden, W.*; Sakamoto, Yoshiteru; Araki, Takao*; Watanabe, Kazuhito*; Matsumiya, Hisato*; Ishii, Kyoko*; et al.
Plasma and Fusion Research (Internet), 9, p.1405139_1 - 1405139_11, 2014/10
Key aspects of the safety study of a water-cooled fusion DEMO reactor is reported. Safety requirements, dose target, DEMO plant model and confinement strategy of the safety study are briefly introduced. The internal hazard of a water-cooled DEMO, i.e. radioactive inventories, stored energies that can mobilize these inventories and accident initiators and scenarios, are evaluated. It is pointed out that the enthalpy in the first wall/blanket cooling loops, the decay heat and the energy potentially released by the Be-steam chemical reaction are of special concern for the water-cooled DEMO. An ex-vessel loss-of-coolant of the first wall/blanket cooling loop is also quantitatively analyzed. The integrity of the building against the ex-VV LOCA is discussed.
Nakamura, Makoto; Ibano, Kenzo*; Tobita, Kenji; Someya, Yoji; Tanigawa, Hisashi; Gulden, W.*; Ogawa, Yuichi*
Proceedings of 25th IAEA Fusion Energy Conference (FEC 2014) (CD-ROM), 8 Pages, 2014/10
Of late in Japan, a design study has been undertaken of a tokamak fusion DEMO with pressurized water coolant and solid pebble bed breeding blanket, but safety characteristics of this type of DEMO have not been well examined. In this paper, thermohydraulics analysis of in-vessel and ex-vessel loss-of-coolant accidents of a water-cooled tokamak DEMO is reported. Safety characteristics of water-cooled DEMO, particularly possible loads onto confinement barriers, are discussed based on the thermohydraulics analysis results. Measures to reduce such loads are also proposed.
Gulden, W.*; Cook, I.*; Marbach, G.*; Raeder, J.*; Petti, D.*; Seki, Yasushi
Fusion Engineering and Design, 51-52(Part.B), p.419 - 427, 2000/11
Times Cited Count：5 Percentile：37.66(Nuclear Science & Technology)no abstracts in English
Nakamura, Makoto; Tobita, Kenji; Tanigawa, Hisashi; Someya, Yoji; Gulden, W.*
no journal, ,
The current status of the DEMO safety research is overviewed. We have set the safety requirements and the evaluation guideline for the safety research. The allowable tritium inventory released from the plant, corresponding to the evaluation guideline, has been evaluated. Next we have estimated the amounts of radioactive source terms and energies that can mobilize the source terms. Accident events of particular concern have been selected. Of these events, we have estimated the pressure load on the reactor building and the tritium inventory released to the environment for an ex-vessel loss of coolant accident. It has been found that the effective dose to public at the site boundary due to the tritium release is far below the evaluation guidelines.
Nakamura, Makoto; Tobita, Kenji; Someya, Yoji; Tanigawa, Hisashi; Sakamoto, Yoshiteru; Gulden, W.*
no journal, ,
Thermohydraulic responses of the DEMO to in-vessel and ex-vessel loss of the primary coolant have been analyzed by the MELCOR code. The analyses have identified possible event sequences following such accidents, their time scales and loads to the confinement barriers of the radioactive materials. On basis of the analyses results, measures to reduce the loads challenging the confinement barrier are proposed.
