Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Iwatsuki, Teruki; Onoe, Hironori; Ishibashi, Masayuki; Ozaki, Yusuke; Wang, Y.*; Hadgu, T.*; Jove-Colon, C. F.*; Kalinina, E.*; Hokr, M.*; Balvn, A.*; et al.
JAEA-Research 2018-018, 140 Pages, 2019/03
DECOVALEX-2019 Task C aims to develop modelling and prediction methods using numerical simulation based on the water-filling experiment to examine the post drift-closure environment recovery processes. In this intermediate report, the results of Step 1 (Modelling and prediction of environmental disturbance by CTD excavation) are summarized from each of the research teams (JAEA, Sandia National Laboratories, Technical University of Liberec). Groundwater inflow rates to the tunnel during the excavation, hydraulic drawdown, and variation of chlorine concentration at monitoring boreholes in the vicinity of the tunnel were chosen as comparison metrics for Step1 by mutual agreement amongst the research teams. It is likely to be possible to foresee the scales of inflow rate and hydraulic drawdown based on a data from the pilot borehole by current simulation techniques.
Kalinina, E. A.*; Hadgu, T.*; Wang, Y.*; Ozaki, Yusuke; Iwatsuki, Teruki
Proceedings of 2nd International Discrete Fracture Network Engineering Conference (DFNE 2018) (Internet), 7 Pages, 2018/06
The Mizunami Underground Research Laboratory is located in the Tono area (Central Japan). Its main purpose is providing a scientific basis for the research and development of technologies needed for deep geological disposal of radioactive waste in fractured crystalline rocks. The current work is focused on the experiments in the research tunnel (500 m depth). The collected tunnel and borehole data were shared with the participants of DEvelopment of COupled models and their VALidation against EXperiments (DECOVALEX) project. This study describes how these data were used to (1) develop the fracture model of the granite rocks around the research tunnel and (2) validate the model.