Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
FCC hierarchical martensite transformation under dynamic impact in FeMnAlNiTi alloyLi, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; Xu, P. G.; Yin, F.*
Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02
Times Cited Count：0 Percentile：0.04(Nanoscience & Nanotechnology)Jiang, X.*; Hattori, Takanori; Xu, X.*; Li, M.*; Yu, C.*; Yu, D.*; Mole, R.*; Yano, Shinichiro*; Chen, J.*; He, L.*; et al.
Materials Horizons, 10(3), p.977 - 982, 2023/03
Times Cited Count：5 Percentile：87.86(Chemistry, Multidisciplinary)As a promising environment-friendly alternative to current vapor-compression refrigeration, solid-state refrigeration based on the barocaloric effect has been attracting world wide attention. Generally, both phases in which a barocaloric effect occurs are present at ambient pressure. Here, instead, we demonstrate that KPF
exhibits a colossal barocaloric effect due to the creation of a high-pressure rhombohedral phase. The phase diagram is constructed based on pressure-dependent calorimetric, Raman scattering, and neutron diffraction measurements. The present study is expected to provide an alternative routine to colossal barocaloric effects through the creation of a high-pressure phase.
Chen, J.*; Yamamoto, Kei; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Ma, J.*; Liu, S.*; Gao, P.*; et al.
Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02
Times Cited Count：4 Percentile：90.23(Physics, Applied)Boznar, M. Z.*; Charnock, T. W.*; Chouhan, S. L.*; Grsic, Z.*; Halsall, C.*; Heinrich, G.*; Helebrant, J.*; Hettrich, S.*; Ku
a, P.*; Mancini, F.*; et al.
IAEA-TECDOC-2001, 226 Pages, 2022/06
The IAEA organized a programme from 2012 to 2015 entitled Modelling and Data for Radiological Impact Assessments (MODARIA), which aimed to improve capabilities in the field of environmental radiation dose assessment by acquiring improved data, model testing and comparison of model inputs, assumptions and outputs, reaching a consensus on modelling philosophies, aligning approaches and parameter values, developing improved methods and exchanging information. This publication describes the activities of Working Group 2, Exposures in Contaminated Urban Environments and Effect of Remedial Measures.
Thiessen, K. M.*; Boznar, M. Z.*; Charnock, T. W.*; Chouhan, S. L.*; Federspiel, L.; Gra
i, B.*; Grsic, Z.*; Helebrant, J.*; Hettrich, S.*; Hulka, J.*; et al.
Journal of Radiological Protection, 42(2), p.020502_1 - 020502_8, 2022/06
Times Cited Count：5 Percentile：78.52(Environmental Sciences)Takahara, Shogo; Charnock, T. W.*; Silva, K.*; Hwang, W. T.*; Lee, J.*; Yu, C.*; Kamboj, S.*; Yankovich, T.*; Thiessen, K. M.*
Journal of Radiological Protection, 42(2), p.020517_1 - 020517_13, 2022/06
Times Cited Count：0 Percentile：0.01(Environmental Sciences)State-of-the-art dose assessment models were applied to estimate doses to the population in urban areas contaminated by the Fukushima Daiichi Nuclear Power Plant accident. Assessment results were compared among five models, and comparisons of model predictions with actual measurements were also made. Assessments were performed using both probabilistic and deterministic approaches. Predicted dose distributions in indoor and outdoor workers from a probabilistic approach were in good agreement with the actual measurements. In addition, when the models were applied to assess the doses to a representative person, based on a concept suggested by the International Commission on Radiological Protection (ICRP), it was evident that doses to the representative person obtained with a deterministic approach were always higher than those obtained with a probabilistic approach.
/La
Sr
MnO heterostructuresZhang, J.*; Chen, M.*; Chen, J.*; Yamamoto, Kei; Wang, H.*; Hamdi, M.*; Sun, Y.*; Wagner, K.*; He, W.*; Zhang, Y.*; et al.
Nature Communications (Internet), 12, p.7258_1 - 7258_8, 2021/12
Times Cited Count：14 Percentile：77.64(Multidisciplinary Sciences)
decay of 
USun, M. D.*; Liu, Z.*; Huang, T. H.*; Zhang, W. Q.*; Andreyev, A. N.; Ding, B.*; Wang, J. G.*; Liu, X. Y.*; Lu, H. Y.*; Hou, D. S.*; et al.
Physics Letters B, 800, p.135096_1 - 135096_5, 2020/01
Times Cited Count：11 Percentile：79.42(Astronomy & Astrophysics)
Co
Sn
Cheung, Y. W.*; Zhang, J. Z.*; Zhu, J. Y.*; Yu, W. C.*; Hu, Y. J.*; Wang, D. G.*; Otomo, Yuka*; Iwasa, Kazuaki*; Kaneko, Koji; Imai, Masaki*; et al.
Physical Review B, 93(24), p.241112_1 - 241112_5, 2016/06
Times Cited Count：14 Percentile：54.92(Materials Science, Multidisciplinary)Nishiuchi, Mamiko; Choi, I. W.*; Daido, Hiroyuki; Nakamura, Tatsufumi*; Pirozhkov, A. S.; Yogo, Akifumi*; Ogura, Koichi; Sagisaka, Akito; Orimo, Satoshi; Daito, Izuru*; et al.
Plasma Physics and Controlled Fusion, 57(2), p.025001_1 - 025001_9, 2015/02
Times Cited Count：3 Percentile：13.75(Physics, Fluids & Plasmas)Projection images of a metal mesh produced by directional MeV electron beam together with directional proton beam, emitted simultaneously from a thin foil target irradiated by an ultrashort intense laser. The mesh patterns are projected to each detector by the electron beam and the proton beam originated from tiny virtual sources of 
20 micron meter and 10 micron meter diameters, respectively. Based on the observed quality and magnification of the projection images, we estimate sizes and locations of the virtual sources for both beams and characterize their directionalities. To carry out physical interpretation of the directional electron beam qualitatively, we perform 2D particle-in-cell simulation which reproduces a directional escaping electron component, together with a non-directional dragged-back electron component, the latter mainly contributes to building a sheath electric field for proton acceleration.
Yu, Q.*; Qi, L.*; Tsuru, Tomohito; Traylor, R.*; Rugg, D.*; Morris, J. W. Jr.*; Asta, M.*; Chrzan, D. C.*; Minor, A. M.*
Science, 347(6222), p.635 - 639, 2015/02
Times Cited Count：240 Percentile：98.35(Multidisciplinary Sciences)Given that solute atoms interact weakly with the long-range elastic fields of screw dislocations, it has long been accepted that solution hardening is only marginally effective in materials with mobile screw dislocations. This accepted wisdom has recently been questioned by first-principles calculations suggesting that solutes may interact much more strongly with the screw dislocation core. We report here the results of a combined experimental and computational study undertaken to elucidate the profound hardening effect of oxygen in pure hexagonally-close-packed structured -Ti. High resolution and in situ transmission electron microscopy nanomechanical characterization establish that the strengthening is due to the strong interaction between oxygen and the core of screw dislocations that mainly glide on prismatic planes. First-principles calculations of the screw dislocation core reveal a simple crystallographic source for the oxygen-dislocation interaction that is consistent with experimental observations. The distortion of the interstitial sites at the dislocation core creates a very strong but short-range repulsion for oxygen atoms. These mechanisms effectively pin the dislocation near the oxygen interstitial. These results establish a highly effective mechanism for strengthening by interstitial solutes that, contrary to prior understanding, may be significant in many structural alloys.
Deng, Z.*; Zhao, K.*; Gu, B.; Han, W.*; Zhu, J. L.*; Wang, X. C.*; Li, X.*; Liu, Q. Q.*; Yu, R. C.*; Goko, Tatsuo*; et al.
Physical Review B, 88(8), p.081203_1 - 081203_5, 2013/08
Times Cited Count：73 Percentile：91.83(Materials Science, Multidisciplinary)Vostner, A.*; Pong, I.*; Bessette, D.*; Devred, A.*; Sgobba, S.*; Jung, A.*; Weiss, K.-P.*; Jewell, M. C.*; Liu, S.*; Yu, W.*; et al.
IEEE Transactions on Applied Superconductivity, 23(3), p.9500705_1 - 9500705_5, 2013/06
Times Cited Count：12 Percentile：53.02(Engineering, Electrical & Electronic)The ITER Cable-In-Conduit Conductor (CICC) used in the superconducting magnet system consists of a cable made of 300 to 1440 strands housed in a stainless steel tube (a.k.a. jacket or conduit). There are circular, square, as well as circle-in-square jackets, made of either a very low carbon AISI 316LN grade stainless steel or a high Mn austenitic stainless steel developed for ITER called JK2LB. Selected mechanical properties of the base material and weld joint were tested at room temperature and/or cryogenic temperatures (
7 K). The Domestic Agencies (DAs) reference laboratories and the ITER-IO appointed reference laboratories, CERN and Karlsruhe Institute of Technology (KIT) performed mechanical tests. This paper will compare the test results (e.g. elongation to failure) from different laboratories.
Choi, I. W.*; Kim, I. J.*; Pae, K. H.*; Nam, K. H.*; Lee, C.-L.*; Yun, H.*; Kim, H. T.*; Lee, S. K.*; Yu, T. J.*; Sung, J. H.*; et al.
Applied Physics Letters, 99(18), p.181501_1 - 181501_3, 2011/11
Times Cited Count：17 Percentile：57.65(Physics, Applied)We report the manufacturing of a thin foil target made of conjugated polymer, and the simultaneous observation of laser accelerated ions and second harmonic radiation, when irradiated with ultrahigh-contrast laser pulse at a maximum intensity of 4
10
W/cm
. Maximum proton energy of 8 MeV is achieved along the target normal direction. Strong second harmonic with over 6% energy ratio compared to fundamental is emitted along the specular direction. Two-dimensional particle-in-cell simulations confirm the simultaneous generation of protons and high-order harmonics, which demonstrates the feasibility of applications requiring particle and radiation sources at once, effectively using the same laser and target.
Park, J. M.*; Murakami, Masanori*; Petty, C. C.*; Heidbrink, W. W.*; Osborne, T. H.*; Holcomb, C. T.*; Van Zeeland, M. A.*; Prater, R.*; Luce, T. C.*; Wade, M. R.*; et al.
Physics of Plasmas, 16(9), p.092508_1 - 092508_10, 2009/09
Times Cited Count：24 Percentile：66.05(Physics, Fluids & Plasmas)Neutral beam current drive (NBCD) experiments in DIII-D using vertically shifted plasmas to move the current drive away from the axis have clearly demonstrated robust off-axis NBCD. Time-dependent measurements of magnetic pitch angles by the motional Stark effect diagnostic are used to obtain the evolution of the poloidal magnetic flux, which indicates a broad off-axis NBCD profile with a peak at about half the plasma radius. In most cases, the measured off-axis NBCD profile is consistent with calculations using an orbit-following Monte-Carlo code for the beam ion slowing down including finite-orbit effects, provided there is no large-scale MHD activity such as Alfv
n eigenmodes modes or sawteeth. Good agreement is found between the measured pitch angles and those from simulations using transport-equilibrium codes. Two-dimensional image of Doppler-shifted fast ion D light emitted by neutralized energetic ions shows clear evidence for a hollow profile of beam ion density, consistent with classical beam ion slowing down. The magnitude of off-axis NBCD is sensitive to the alignment of the beam injection relative to the helical pitch of the magnetic field lines. If the signs of B and I yield the proper helicity, both measurement and calculation indicate that the efficiency is as good as on-axis NBCD because the increased fraction of trapped electrons reduces the electron shielding of the injected ion current, in contrast with electron current drive schemes where the trapping of electrons degrades the efficiency. The measured off-axis NBCD increases approximately linearly with the injection power, although a modest amount of fast ion diffusion is needed to explain an observed difference in the NBCD profile between the measurement and the calculation at high injection power.
Murakami, Masanori*; Park, J. M.*; Petty, C. C.*; Luce, T. C.*; Heidbrink, W. W.*; Osborne, T. H.*; Prater, R.*; Wade, M. R.*; Anderson, P. M.*; Austin, M. E.*; et al.
Nuclear Fusion, 49(6), p.065031_1 - 065031_8, 2009/06
Times Cited Count：43 Percentile：82.81(Physics, Fluids & Plasmas)Modification of the two existing DIII-D neutral beam lines is planned to allow vertical steering to provide off-axis neutral beam current drive (NBCD) peaked as far off-axis as half the plasma minor radius. New calculations for a downward-steered beam indicate strong current drive with good localization off-axis so long as the toroidal magnetic field, BT, and the plasma current, Ip, point in the same direction. This is due to good alignment of neutral beam injection (NBI) with the local pitch of the magnetic field lines. This model has been tested experimentally on DIII-D by an injecting equatorially-mounted NBs into reduced size plasmas that are vertically displaced with respect to the vessel midplane. The existence of off-axis NBCD is evident in the changes seen in sawtooth behavior in the internal inductance. By shifting the plasma upward or downward, or by changing the sign of the toroidal field, measured off-axis NBCD profiles measured with motional Stark effect data and internal loop voltage show a difference in amplitude (40%-45%) consistent with predicted differences predicted by the changed NBI alignment with respect to the helicity of the magnetic field lines. The effects of NB injection direction relative to field line helicity can be large even in ITER: off-axis NBCD can be increased by more than 20% if the BT direction is reversed. Modification of the DIII-D NB system will strongly support scenario development for ITER and future tokamaks as well as providing flexible scientific tools for understanding transport, energetic particles and heating and current drive.
Nishiuchi, Mamiko; Daido, Hiroyuki; Yogo, Akifumi; Orimo, Satoshi; Ogura, Koichi; Ma, J.-L.; Sagisaka, Akito; Mori, Michiaki; Pirozhkov, A. S.; Kiriyama, Hiromitsu; et al.
Physics of Plasmas, 15(5), p.053104_1 - 053104_10, 2008/05
Times Cited Count：45 Percentile：83.73(Physics, Fluids & Plasmas)High-flux energetic protons whose maximum energies are up to 4 MeV are generated by an intense femtosecond Titanium Sapphire laser pulse interacting with a 7.5, 12.5, and 25
m thick Polyimide tape targets. The laser pulse energy is 1.7 J, duration is 34 fs, and intensity is 310Wcm
. The amplified spontaneous emission (ASE) has the intensity contrast ratio of 410
. The conversion efficiency from laser energy into proton kinetic energies of 3% is achieved, which is comparable or even higher than those achieved in the previous works with nanometer-thick targets and the ultrahigh contrast laser pulses (10
).
Orimo, Satoshi; Nishiuchi, Mamiko; Daido, Hiroyuki; Yogo, Akifumi; Ogura, Koichi; Sagisaka, Akito; Li, Z.*; Pirozhkov, A. S.; Mori, Michiaki; Kiriyama, Hiromitsu; et al.
Japanese Journal of Applied Physics, Part 1, 46(9A), p.5853 - 5858, 2007/09
Times Cited Count：17 Percentile：54.99(Physics, Applied)A laser-driven proton beam with a maximum energy of a few MeV is stably obtained using an ultra-short and high-intensity Titanium Sapphire laser. At the same time, keV X-ray is also generated at almost the same place where protons are emitted. Here, we show the successful demonstration of simultaneous proton and X-ray projection images of a test sample placed close to the source with a resolution of 10m, which is determined from the source sizes. Although the experimental configuration is very simple, the simultaneity is better than a few hundreds of ps. A CR-39 track detector and imaging plate, which are placed as close as possible to the CR-39, are used as detectors of protons and X-ray. The technique is applicable to the precise observation of microstructures.
Daido, Hiroyuki; Sagisaka, Akito; Ogura, Koichi; Orimo, Satoshi; Nishiuchi, Mamiko; Mori, Michiaki; Ma, J.-L.; Pirozhkov, A. S.; Kiriyama, Hiromitsu; Kanazawa, Shuhei; et al.
Proceedings of 7th Pacific Rim Conference on Lasers and Electro-Optics (CLEO-PR 2007) (CD-ROM), p.77 - 79, 2007/00
We are developing a proton accelerator using an intense lasers with a focused intensity of 
10
W/cm. To monitor proton energy spectra as well as plasma parameters at each laser shot, we are using real time detectors. The proton energy of MeV is stably obtained for applications.
Daido, Hiroyuki; Sagisaka, Akito; Ogura, Koichi; Orimo, Satoshi; Nishiuchi, Mamiko; Yogo, Akifumi; Mori, Michiaki; Li, Z.*; Kiriyama, Hiromitsu; Kanazawa, Shuhei; et al.
X-Ray Lasers 2006; Springer Proceedings in Physics, Vol.115, p.595 - 605, 2007/00
At present, using ultra-short high intensity lasers at APRC, JAEA Kansai photon research institute, we are developing laser driven multiple quantum beams such as protons, X-rays, electrons and THz waves. These beams are perfectly synchronized with each other. The pulse duration of each beam is lass than a pico-second. They have sharp directionality with high brightness. If we properly combined these, we have new pump-probe techniques for various applications.
