Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hirata, Yoshinobu*; Nakagawa, Hiroshi; Yamauchi, Hiroki; Kaneko, Koji; Hagihara, Masato; Yamaguchi, Hideyuki*; Omoto, Chie*; Katsuno, Nakako*; Imaizumi, Teppei*; Nishizu, Takahisa*
Food Hydrocolloids, 141, p.108728_1 - 108728_7, 2023/08
Times Cited Count：2Crystallinity is reflected in the mechanical properties of foods and materials. Crystallinity should be related to the structural dynamics of starch. In this study, we used quasi-elastic neutron scattering (QENS) to investigate changes in the molecular dynamics of cooked rice starch during retrogradation. The width of the measured QENS narrowed with retrogradation. The elastic incoherent structure factor (EISF) increased, which indicated that the molecular dynamics are spatially suppressed upon retrogradation. Analysis of EISF with a bimodal continuous diffusion model, where low and high mobilities are assumed to correspond to crystalline and amorphous phases, respectively, showed that the fraction of the low-mobility component increases with retrogradation.
continuous air monitor for the measurement of highly radioactive alpha-emitting particulates (
-aerosols) under high humidity environmentTsubota, Yoichi; Honda, Fumiya; Tokonami, Shinji*; Tamakuma, Yuki*; Nakagawa, Takahiro; Ikeda, Atsushi
Nuclear Instruments and Methods in Physics Research A, 1030, p.166475_1 - 166475_7, 2022/05
Times Cited Count：2 Percentile：33.4(Instruments & Instrumentation)In the long-lasting decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), the dismantling of nuclear fuel debris (NFD) remaining in the damaged reactors is an unavoidable but significant issue with many technical difficulties. The dismantling is presumed to involve mechanical cutting, generating significant concentrations of particulates containing -radionuclides (-aerosols) that pose significant health risk upon inhalation. In order to minimize the radiation exposure of workers with -aerosols during the dismantling/decommissioning process at 1F, it is essential to monitor the concentration of -aerosols at the point of initial generation, i.e. inside the primary containment vessels (PCV) of the damaged reactors. Toward this end, an 
monitoring system for -aerosols ( alpha air monitor: IAAM) was developed and its technical performance was investigated under the conditions expected for the actual environments at 1F. IAAM was confirmed to fulfill four technical requirements: (1) steady operation under high humidity, (2) operation without using filters, (3) capability of measuring a high counting rate of -radiation, and (4) selective measurement of -radiation even under high radiation background with 
/
-rays. IAAM is capable of selectively measuring -aerosols with a concentration of 3.3 
10
Bq/cm
or higher without saturation under a high humid environment (100%-relative humidity) and under high background with /-radiation (up to 100 mSv/h of -radiation). These results demonstrate promising potential of IAAM to be utilized as a reliable monitoring system for -aerosols during the dismantling of NFD, as well as the whole long-lasting decommissioning of 1F.
Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.
High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02
As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950
C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.
Ishitsuka, Etsuo; Nakashima, Koki*; Nakagawa, Naoki*; Ho, H. Q.; Ishii, Toshiaki; Hamamoto, Shimpei; Takamatsu, Kuniyoshi; Kenzhina, I.*; Chikhray, Y.*; Matsuura, Hideaki*; et al.
JAEA-Technology 2020-008, 16 Pages, 2020/08
JAEA-Technology-2020-008.pdf:2.98MB
As a summer holiday practical training 2019, the feasibility study for nuclear design of a nuclear battery using HTTR core was carried out, and the 
U enrichment and burnable poison of the fuel, which enables continuous operation for 30 years with thermal power of 5 MW, were studied by the MVP-BURN. As a result, it is clear that a fuel with U enrichment of 12%, radius of burnable poison and natural boron concentration of 1.5 cm and 2wt% are required. As a next step, the downsizing of core will be studied.
Fukaya, Yuji; Nakagawa, Shigeaki; Goto, Minoru; Ishitsuka, Etsuo; Kawakami, Satoru; Uesaka, Takahiro; Morita, Keisuke; Sano, Tadafumi*
KURNS Progress Report 2018, P. 148, 2019/08
The Japan Atomic Energy Agency (JAEA) started the Research and Development (R&D) to improve nuclear prediction techniques for High Temperature Gas-cooled Reactors (HTGRs). The objectives are to introduce generalized bias factor method to avoid full mock-up experiment for the first commercial HTGR and to introduce reactor noise analysis to High Temperature Engineering Test Reactor (HTTR) experiment. To achieve the objectives, the reactor core of graphite moderation system named B7/4"G2/8"p8EUNU+3/8"p38EU(1) was newly composed in the B-rack of Kyoto University Critical Assembly (KUCA). The core plays a role of the reference core of the bias factor method, and the reactor noise was measured to develop the noise analysis scheme. In addition, training of operator of HTTR was also performed during the experiments.
Takada, Shoji; Honda, Yuki*; Inaba, Yoshitomo; Sekita, Kenji; Nemoto, Takahiro; Tochio, Daisuke; Ishii, Toshiaki; Sato, Hiroyuki; Nakagawa, Shigeaki; Sawa, Kazuhiro*
Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10
Nuclear heat utilization systems connected to HTGRs will be designed on the basis of non-nuclear grade standards for easy entry of chemical plant companies, requiring reactor operations to continue even if abnormal events occur in the systems. The inventory control is considered as one of candidate methods to control reactor power for load following operation for siting close to demand area, in which the primary gas pressure is varied while keeping the reactor inlet and outlet coolant temperatures constant. Numerical investigation was carried out based on the results of nuclear heat supply fluctuation tests using HTTR by non-nuclear heating operation to focus on the temperature transient of the reactor core bottom structure by imposing stepwise fluctuation on the reactor inlet temperature under different primary gas pressures below 120C. As a result, it was emerged that the fluctuation absorption characteristics are not deteriorated by lowering pressure. It was also emerged that the reactor outlet temperature did not reach the scram level by increasing the reactor inlet temperature 10 C stepwise at 80% of the rated power as same with the full power case.
Honda, Yuki; Sato, Hiroyuki; Nakagawa, Shigeaki; Ohashi, Hirofumi
Journal of Nuclear Engineering and Radiation Science, 4(3), p.031013_1 - 031013_11, 2018/07
There is growing interest in uncertainty analysis for probabilistic risk assessment (PRA). The focus of this research is to propose and trial investigate the new approach which identify influencing factors for uncertainty in a systematic manner for High Temperature Gas -cooled Reactor (HTGR). As a trial investigation, this approach is tested to evaluation of maximum fuel temperature in a depressurized loss-of-forced circulation (DLOFC) accident and failure of mitigation systems such as control rod systems from the view point of reactor dynamics and thermal hydraulic characteristics. As a result, 16 influencing factors are successfully selected in accordance with the suggested procedure. In the future, the selected influencing factors will be used as input parameter for uncertainty propagation analysis.
Honda, Yuki; Sato, Hiroyuki; Nakagawa, Shigeaki; Ohashi, Hirofumi
Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 9 Pages, 2017/07
There is growing interest in uncertainty analysis for probabilistic risk assessment (PRA). Our target is the uncertainty analysis method development for depressurized loss-of-forced circulation (DLOFC) accident with failure of control rod systems (CRS). As one of key elements, this paper focuses on the quantification of uncertainty for the fuel temperature which is dominant for a source term analysis. As an initial step, this paper aims to suggest a procedure to identify influencing factors which is input parameter for uncertainty analysis, and shows the results of derivation of variable parameters by expansion of dynamic equation and extraction of uncertainties in variable factors.
Honda, Yuki; Inaba, Yoshitomo; Nakagawa, Shigeaki; Yamazaki, Kazunori; Kobayashi, Shoichi; Aono, Tetsuya; Shibata, Taiju; Ishitsuka, Etsuo
JAEA-Technology 2017-013, 20 Pages, 2017/06
JAEA-Technology-2017-013.pdf:2.52MB
Decay heat is one of an important factor for a safety evaluation of depressurized loss-of-forced cooling accident, a representative high consequence accident, in high temperature gas-cooled reactor (HTGR). Traditionally, a conservative decay heat curve is used for safety analysis according to the regulatory standards. On the other hand, there is growing interest in obtaining test data related to decay heat for the use of uncertainty analysis. However, such data has not been obtained for prismatic-type HTGR. Therefore, we have launched a test program to obtain the decay heat data from the HTTR. As an initial step, an applicability confirmation test of decay heat evaluation method for HTGR was conducted in February 2017 without non-nuclear heating condition. This report introduces an estimation method for the decay heat based on test data using HTTR and shows the results of validation of the reactor residual heat evaluation method which will be used to obtain the decay heat data based on test data.
Tochio, Daisuke; Honda, Yuki; Sato, Hiroyuki; Sekita, Kenji; Homma, Fumitaka; Sawahata, Hiroaki; Takada, Shoji; Nakagawa, Shigeaki
Journal of Nuclear Science and Technology, 54(1), p.13 - 21, 2017/01
Times Cited Count：1 Percentile：10.62(Nuclear Science & Technology)GTHTR300C is designed and developed in JAEA. The reactor system is required to continue a stable and safety operation as well as a stable power supply in the case that thermal-load is fluctuated by the occurrence of abnormal event in the heat utilization system. Then, it is necessary to demonstrate that the thermal-load fluctuation should be absorbed by the reactor system so as to continue the stable and safety operation could be continued. The thermal-load fluctuation absorption tests without nuclear heating were planned and conducted in JAEA to clarify the absorption characteristic of thermal-load fluctuation mainly by the reactor and by the IHX. As the result it was revealed that the reactor has the larger absorption capacity of thermal-load fluctuation than expected one, and the IHX can be contributed to the absorption of the thermal-load fluctuation generated in the heat utilization system in the reactor system. It was confirmed from there result that the reactor and the IHX has effective absorption capacity of the thermal-load fluctuation generated in the heat utilization system. Moreover it was confirmed that the safety estimation code based on RELAP5/MOD3 can represents the thermal-load fluctuation absorption behavior conservatively.
Honda, Yuki; Fukaya, Yuji; Nakagawa, Shigeaki; Baker, R. I.*; Sato, Hiroyuki
Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.704 - 713, 2016/11
A high-temperature gas-cooled reactor (HTGR) has superior safety characteristics. A loss of forced cooling (LOFC) test using a high-temperature engineering test reactor (HTTR) has been carried out to verify the inherent safety of an HTGR when forced cooling is diminished without reactor scram. In the test, an all-gas circulator was tripped with an initial reactor power of 9 MW and re-criticality was shown. This study focuses on developing a point kinetics method with RELAP5-3D code for an LOFC accident. There is a large temperature difference between the inlet and outlet of the core in an HTGR, and the temperature fluctuation range has been large in several accidents. We analyze the temperature dependency of xenon-135 reactivity and show that the temperature dependency of xenon-135 microscopic absorption cross-section affected the re-criticality time of the LOFC test.
Inaba, Yoshitomo; Sekita, Kenji; Nemoto, Takahiro; Honda, Yuki; Tochio, Daisuke; Sato, Hiroyuki; Nakagawa, Shigeaki; Takada, Shoji; Sawa, Kazuhiro
Journal of Nuclear Engineering and Radiation Science, 2(4), p.041001_1 - 041001_7, 2016/10
The nuclear heat utilization systems connected to High Temperature Gas-cooled Reactors (HTGRs) will be designed on the basis of non-nuclear grade standards in terms of the easier entry of chemical plant companies and the construction economics of the systems. Therefore, it is necessary that the reactor operations can be continued even if abnormal events occur in the systems. The Japan Atomic Energy Agency has developed a calculation code to evaluate the absorption of thermal load fluctuations by the reactors when the reactor operations are continued after such events, and has improved the code based on the High Temperature engineering Test Reactor (HTTR) operating data. However, there were insufficient data on the transient temperature behavior of the metallic core side components and the graphite core support structures corresponding to the fluctuation of the reactor inlet coolant temperature for further improvement of the code. Thus, nuclear heat supply fluctuation tests with the HTTR were carried out in non-nuclear heating operation to focus on thermal effect. In the tests, the coolant helium gas temperature was heated up to 120C by the compression heat of the gas circulators in the HTTR, and a sufficiently high fluctuation of 17C by devising a new test procedure was imposed on the reactor inlet coolant under the ideal condition without the effect of the nuclear power. Then, the temperature responses of the metallic core side components and the graphite core support structures were investigated. The test results adequately showed as predicted that the temperature responses of the metallic components are faster than those of the graphite structures, and the mechanism of the thermal load fluctuation absorption by the metallic components was clarified.
Honda, Yuki; Tochio, Daisuke; Nakagawa, Shigeaki; Sekita, Kenji; Homma, Fumitaka; Sawahata, Hiroaki; Sato, Hiroyuki; Sakaba, Nariaki; Takada, Shoji
JAEA-Technology 2016-016, 16 Pages, 2016/08
JAEA-Technology-2016-016.pdf:2.84MB
A system analysis code is validated with the thermal-load fluctuation absorption test with nun-nuclear heating by using the High Temperature Engineering test Reactor (HTTR) to clarify the High Temperature Gas-cooled Reactor (HTGR) system response against temperature transient. The thermal-load fluctuation absorption test consists on the thermal load fluctuation tests (non-nuclear heating) and heat application system abnormal simulating test (non-nuclear heating). The HTGR reactor response against temperature transient is clarified in the thermal load fluctuation test (non-nuclear heating). The Intermediate Heat Exchanger (IHX) reactor response against temperature transient is clarified in the heat application system abnormal simulating test (non-nuclear heating). With the two HTTR non-nuclear heating test, HTGR system response against temperature transient is obtained.
Honda, Yuki; Tochio, Daisuke; Sato, Hiroyuki; Nakagawa, Shigeaki; Ono, Masato; Fujiwara, Yusuke; Hamamoto, Shimpei; Iigaki, Kazuhiko; Takada, Shoji
Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 5 Pages, 2016/06
The characteristic confirmation test has been demonstrating by using the High Temperature engineering Test Reactor (HTTR). The thermal load fluctuation test, which is one of marginal performance test is planned to be carried out after restarting of the HTTR. The preliminary analysis for the thermal load fluctuation test has been investigated. In the analysis, the reactor outlet temperature can continue to be stable against the reactor inlet temperature changing by thermal fluctuation. It means that HTGR have the capability of absorbing thermal fluctuation. This paper focuses on the investigation of mechanism of absorbing thermal fluctuation. With additional analysis, it is cleared that the large negative graphite moderator reactivity enhances the capability of absorbing thermal fluctuation. In addition, in the middle of the core, graphite moderator reactivity insertion trend are inverted. This trend is unique to HTGR because of large temperature difference between core inlet and outlet.
Honda, Yuki; Sato, Hiroyuki; Nakagawa, Shigeaki; Takada, Shoji; Tochio, Daisuke; Sakaba, Nariaki; Sawa, Kazuhiro
JAEA-Technology 2015-012, 17 Pages, 2015/06
JAEA-Technology-2015-012.pdf:11.38MB
Japan Atomic Energy Agency (JAEA) proposed a draft safety requirement, which consists of the requirements for constructing a H
plant under conventional chemical plant regulations as well as the requirements for collocation of a nuclear facility and a H plant. One of the key requirements is to maintain reactor normal operation condition during every possible condition in the H plant. In order to show that the requirement can be reasonably achieved, a system analysis code is validated with the HTTR experimental data obtained in January 2015. The validated code is applied for the evaluation of a postulated abnormal event in H plant to be connected to the HTTR. The results showed that the evaluation items such as reactor power and reactor outlet coolant temperature do not exceed evaluation criteria. As a conclusion, a feasibility of H plant construction under non-nuclear regulations is validated by showing that the stable reactor operation can be achieved against temperature transients induced by abnormal conditions in the H plant.
Takada, Shoji; Sekita, Kenji; Nemoto, Takahiro; Honda, Yuki; Tochio, Daisuke; Inaba, Yoshitomo; Sato, Hiroyuki; Nakagawa, Shigeaki; Sawa, Kazuhiro
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 7 Pages, 2015/05
To investigate the safety design criteria of heat utilization system for the HTGRs, it is necessary to evaluate the effect of fluctuation of thermal load on the reactor. The nuclear heat supply fluctuation test by non-nuclear heating was carried out to simulate the nuclear heat supply test which is carried out in the nuclear powered operation. The test data is used to verify the numerical code to calculate the temperature of core bottom structure to carry out the safety evaluation of abnormal events in the heat utilization system. In the test, the helium gas temperature was heated up to 120C. A sufficiently high temperature disturbance was imposed on the reactor inlet temperature. It was found that the response of temperatures of metallic components such as side shielding blocks was faster than those of graphite blocks in the core bottom structure, which was significantly affected by the heat capacities of components, the level of imposed disturbance and heat transfer performance.
Honda, Yuki; Saito, Kenji; Tochio, Daisuke; Aono, Tetsuya; Hirato, Yoji; Kozawa, Takayuki; Nakagawa, Shigeaki
Journal of Nuclear Science and Technology, 51(11-12), p.1387 - 1397, 2014/11
Times Cited Count：1 Percentile：8.88(Nuclear Science & Technology)The operational experiments of the HTTR would be useful for future high-temperature gas-cooled reactors (HTGRs). Main PID control constants of the HTTR are selected with reasonably damped characteristics and without undershoot or overshoot. For utilization the HTGR as a commercial reactor, it should be demonstrated that the HTGR system can supply stable heat to a heat utilization system for the long-term operation. The control characteristics in the long-term high-temperature operation are evaluated by the result of operation performed in 2010. In addition, from a viewpoint of HTGRs with heat utilization system, a future possibility of the experiments for heat utilization design is examined.
Irisawa, Keita; Nakagawa, Akinori; Onizawa, Takashi*; Kogawara, Takafumi*; Hanada, Keiji; Meguro, Yoshihiro
Proceedings of 15th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM 2013) (CD-ROM), 5 Pages, 2013/09
Times Cited Count：1 Percentile：60.76(Engineering, Environmental)Takada, Chie; Kurihara, Osamu*; Kanai, Katsuta; Nakagawa, Takahiro; Tsujimura, Norio; Momose, Takumaro
NIRS-M-252, p.3 - 11, 2013/03
A massive earthquake and tsunami on March 11, 2011 resulted in an enormous amount of release of radioactivity to the environment. On the day after the earthquake occurrence, Japan Atomic Energy Agency (JAEA) started emergency radiological monitoring. The measurements with whole body counter (WBC) for the staff members who had returned from Fukushima started at the end of March. The measured activity of 
I due to inhalation for emergency staff varied from LLD to 7 kBq, which corresponded to a range of estimated initial intakes of 
1 to 60 kBq when extrapolated back to the date on which the staff started the operation in Fukushima. The measured activity of 
Cs and 
Cs were both in the ranges of LLD - 3 kBq. The range of initial intake of Cs to I was 11 when taking a median from all the measurements. The maximum committed effective dose of 0.8 mSv was recorded for a worker, a member of the 2nd monitoring team dispatched from March 13 to 14.
I in the thyroids of employees involved in the Fukushima Daiichi Nuclear Power Station accidentKurihara, Osamu*; Kanai, Katsuta; Nakagawa, Takahiro; Takada, Chie; Tsujimura, Norio; Momose, Takumaro; Furuta, Sadaaki
Journal of Nuclear Science and Technology, 50(2), p.122 - 129, 2013/02
Times Cited Count：6 Percentile：44.02(Nuclear Science & Technology)no abstracts in English
