Applicability of equivalent linear three-dimensional FEM analysis of reactor buildings to the seismic response of a soil-structure interaction system

Ichihara, Yoshitaka*; Nakamura, Naohiro*; Nabeshima, Kunihiko*; Choi, B.; Nishida, Akemi

Transactions of the 26th International Conference on Structural Mechanics in Reactor Technology (SMiRT-26) (Internet), 10 Pages, 2022/07

The objective of this study is to evaluate the applicability of the equivalent linear analysis method for reinforced concrete, which uses frequency-independent complex damping with a small computational load, to the seismic design of reactor building of the nuclear power plant. To achieve this, the three-dimensional finite element analyses of the soil-structure interaction system focusing on the nonlinear and equivalent linear seismic behavior under an ideal soil condition were performed for Kashiwazaki-Kariwa nuclear power plant Unit 7 reactor building. From these results, the equivalent linear analysis method showed a generally good correspondence with the nonlinear analysis method, and the effectiveness of the method was confirmed.

Applicability of equivalent linear analysis to reinforced concrete shear walls; 3D FEM simulation of experiment results of seismic wall ultimate behavior

Ichihara, Yoshitaka*; Nakamura, Naohiro*; Moritani, Hiroshi*; Horiguchi, Tomohiro*; Choi, B.

Nihon Genshiryoku Gakkai Wabun Rombunshi, 21(1), p.1 - 14, 2022/03

https://doi.org/10.3327/taesj.J20.038

In this study, we aim to approximately evaluate the effect of nonlinearity of reinforced concrete structures through seismic response analysis using the equivalent linear analysis method. A simulation analysis was performed for the ultimate response test of the shear wall of the reactor building used in an international competition by OECD/NEA in 1996. The equivalent stiffness and damping of the shear wall were obtained from the trilinear skeleton curves proposed by the Japan Electric Association and the hysteresis curves proposed by Cheng et al. The dominant frequency, maximum acceleration response, maximum displacement response, inertia force-displacement relationship, and acceleration response spectra of the top slab could be simulated well up to a shear strain of approximately =2.010. The equivalent linear analysis used herein underestimates the maximum displacement response at the time of ultimate fracture of approximately =4.010. Moreover, the maximum shear strain of the shear wall could not capture the locally occurring shear strain compared with that of the nonlinear analysis. Therefore, when employing this method to evaluate the maximum shear strain and test results, including those during the sudden increase in displacement immediately before the fracture, sufficient attention must be paid to its applicability.

3D FEM soil-structure interaction analysis for Kashiwazaki-Kariwa Nuclear Power Plant considering soil separation and sliding

Ichihara, Yoshitaka*; Nakamura, Naohiro*; Moritani, Hiroshi*; Choi, B.; Nishida, Akemi

Frontiers in Built Environment (Internet), 7, p.676408_1 - 676408_14, 2021/06

https://doi.org/10.3389/fbuil.2021.676408

The objective of this study is the improvement of response evaluations of structures, facilities and equipment in evaluation of three-dimensional seismic behavior of nuclear power plant facilities, by three-dimensional finite element method model, including separation and sliding between the soil and the basement walls. To achieve this, simulation analyses of Kashiwazaki Kariwa nuclear power plant unit 7 reactor building under the 2007 Niigataken-chuetsu-oki earthquake event were carried out. These simulation analyses consider soil-structure interaction using a three-dimensional finite element method model in which the soil and building are three-dimensionally modeled by the finite element method. It is found that basemat uplift is generated on east side of the basemat edge, and this has an important influence on the results. The importance is evidenced by the difference of local response in soil pressure characteristics beneath the edge of basemat, the soil pressure characteristics along the east side of basement wall and the maximum acceleration response at the west end of the embedded surface. Although, in this particular study, basemat uplift, separation and sliding have only a relatively small influence on the maximum acceleration response of embedded surface and the soil pressure characteristics along the basement walls and beneath the basemat, under strong earthquake motion, these influences can be significant, therefore appropriate evaluation of this effect should be considered.

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

Microscopic analyses on Zr adsorbed IDA chelating resin by PIXE and EXAFS

Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nomura, Kazunori; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Hagura, Naoto*; Kubota, Toshio*

Nuclear Instruments and Methods in Physics Research B, 477, p.54 - 59, 2020/08

https://doi.org/10.1016/j.nimb.2019.10.028

Single crystal growth and unique electronic states of cubic chiral EuPtSi and related compounds

Onuki, Yoshichika*; Kakihana, Masashi*; Iha, Wataru*; Nakaima, Kenri*; Aoki, Dai*; Nakamura, Ai*; Honda, Fuminori*; Nakashima, Miho*; Amako, Yasushi*; Gochi, Jun*; et al.

JPS Conference Proceedings (Internet), 29, p.012001_1 - 012001_9, 2020/02

https://doi.org/10.7566/JPSCP.29.012001

Analysis on adsorbent for spent solvent treatment by micro-PIXE and EXAFS

Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nakamura, Masahiro; Shibata, Atsuhiro; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Hagura, Naoto*; et al.

International Journal of PIXE, 29(1&2), p.17 - 31, 2019/00

https://doi.org/10.1142/S0129083519500128

The spent PUREX solvent containing U and Pu is generated from the reprocessing process of spent nuclear fuel. The nuclear material removal is important for the safe storage or disposal of the spent solvent. Our previous study revealed that the adsorbent with the iminodiacetic acid (IDA) functional group is one of the most promising materials for designing the nuclear material recovery process. Accordingly, an IDA-type adsorbent was synthesized by using graft polymerization technology or a chemical reaction to improve the adsorption rate and capacity. The synthesized IDA-type adsorbent was characterized by micro particle-induced X-ray emission (PIXE) and extended X-ray absorption fine structure (EXAFS) analyses. The micro-PIXE analysis revealed that Zr was adsorbed on the whole synthesized adsorbents and quantified the microamount of adsorbed Zr. Moreover, EXAFS suggested that Zr in the aqueous solution and solvent can be trapped by the IDA group with different mechanisms.

Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex, 2; Neutron scattering instruments

Nakajima, Kenji; Kawakita, Yukinobu; Ito, Shinichi*; Abe, Jun*; Aizawa, Kazuya; Aoki, Hiroyuki; Endo, Hitoshi*; Fujita, Masaki*; Funakoshi, Kenichi*; Gong, W.*; et al.

Quantum Beam Science (Internet), 1(3), p.9_1 - 9_59, 2017/12

https://doi.org/10.3390/qubs1030009

The neutron instruments suite, installed at the spallation neutron source of the Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex (J-PARC), is reviewed. MLF has 23 neutron beam ports and 21 instruments are in operation for user programs or are under commissioning. A unique and challenging instrumental suite in MLF has been realized via combination of a high-performance neutron source, optimized for neutron scattering, and unique instruments using cutting-edge technologies. All instruments are/will serve in world-leading investigations in a broad range of fields, from fundamental physics to industrial applications. In this review, overviews, characteristic features, and typical applications of the individual instruments are mentioned.

Characterization of the PTW 34031 ionization chamber (PMI) at RCNP with high energy neutrons ranging from 100 - 392 MeV

Theis, C.*; Carbonez, P.*; Feldbaumer, E.*; Forkel-Wirth, D.*; Jaegerhofer, L.*; Pangallo, M.*; Perrin, D.*; Urscheler, C.*; Roesler, S.*; Vincke, H.*; et al.

EPJ Web of Conferences, 153, p.08018_1 - 08018_5, 2017/09

https://doi.org/10.1051/epjconf/201715308018

At CERN, gas-filled ionization chambers PTW-34031 (PMI) are commonly used in radiation fields including neutrons, protons and -rays. A response function for each particle is calculated by the radiation transport code FLUKA. To validate a response function to high energy neutrons, benchmark experiments with quasi mono-energetic neutrons have been carried out at RCNP, Osaka University. For neutron irradiation with energies below 200 MeV, very good agreement was found comparing the FLUKA simulations and the measurements. In addition it was found that at proton energies of 250 and 392 MeV, results calculated with neutron sources underestimate the experimental data due to a non-negligible gamma component originating from the target Li(p,n)Be reaction.

Neutron spectrometry and dosimetry in 100 and 300 MeV quasi-mono-energetic neutron field at RCNP, Osaka University, Japan

Mares, V.*; Trinkl, S.*; Iwamoto, Yosuke; Masuda, Akihiko*; Matsumoto, Tetsuro*; Hagiwara, Masayuki*; Satoh, Daiki; Yashima, Hiroshi*; Shima, Tatsushi*; Nakamura, Takashi*

EPJ Web of Conferences, 153, p.08020_1 - 08020_3, 2017/09

https://doi.org/10.1051/epjconf/201715308020

To validate response of an extended range Bonner Sphere Spectrometer (ERBSS) with He proportional counter, neutron energy spectra were measured using an ERBSS in the quasi-mono-energetic neutron field at the Research Center for Nuclear Physics (RCNP). Using 100 MeV and 296 MeV proton beams, neutron fields with nominal peak energies of 96 MeV and 293 MeV were generated via Li(p,n)Be reactions. The energy spectra were measured at a distance of 35 m from the target. To deduce the corresponding neutron spectra from thermal to the nominal maximum energy, the ERBSS data were unfolded using the MSANDB unfolding code. At high energies, the neutron spectra were also measured by means of the TOF method using NE213 organic liquid scintillators. The agreement between ERBSS and TOF neutron spectra above 5 MeV is very good. Comparison in terms of ambient dose equivalent, H(10) between ERBSS and TOF values for both proton energies shows very good agreement.