Development of nondestructive elemental analysis system for Hayabusa2 samples using muonic X-rays

Osawa, Takahito; Nagasawa, Shunsaku*; Ninomiya, Kazuhiko*; Takahashi, Tadayuki*; Nakamura, Tomoki*; Wada, Taiga*; Taniguchi, Akihiro*; Umegaki, Izumi*; Kubo, Kenya*; Terada, Kentaro*; et al.

ACS Earth and Space Chemistry (Internet), 7(4), p.699 - 711, 2023/04

https://doi.org/10.1021/acsearthspacechem.2c00303

The concentrations of carbon and other major elements in asteroid samples provide very important information on the birth of life on the Earth and the solar-system evolution. Elemental analysis using muonic X-rays is one of the best analytical methods to determine the elemental composition of solid materials, and notably, is the only method to determine the concentration of light elements in bulk samples in a non-destructive manner. We developed a new analysis system using muonic X-rays to measure the concentrations of carbon and other major elements in precious and expectedly tiny samples recovered from the asteroid Ryugu by spacecraft Hayabusa2. Here we report the development process of the system in 4 stages and their system configurations, The analysis system is composed of a stainless-steel analysis chamber, an acrylic glove box for manipulating asteroid samples in a clean environment, and Ge semiconductor detectors arranged to surround the analysis chamber. The performance of the analysis system, including the background level, which is crucial for the measurement, was greatly improved from the first stage to the later ones. Our feasibility study showed that the latest model of our muonic X-ray analysis system is capable of determining the carbon concentration in Hayabusa2's sample model with an uncertainty of less than 10 percent in a 6-day measurement.

Introduction of loop operating system to improve the stability of continuous hydrogen production for the thermochemical water-splitting iodine-sulfur process

Tanaka, Nobuyuki; Takegami, Hiroaki; Noguchi, Hiroki; Kamiji, Yu; Myagmarjav, O.; Kubo, Shinji

International Journal of Hydrogen Energy, 46(55), p.27891 - 27904, 2021/08

https://doi.org/10.1016/j.ijhydene.2021.06.072

The thermochemical water-splitting iodine-sulfur (IS) process enables producing hydrogen. In a previous operation procedure, after the components of the unit operations were individually started, they were connected at the same time. However, it was challenging to stably interconnect the components. This study introduces a new loop operation, subdividing the process configuration into four sections before transferring the continuous operation. The proposed loop operation was validated analyzing the material and heat balances of each section. The calculated results showed that the material balances of respective loop sections were closed. The loop operation mode would transfer to the continuous operation by connect all sections. Regarding the switching of operation modes, the material and heat balance showed no or little difference, indicating that two operation modes could only be changed by switching the pipelines. Consequently, the loop sections could be individually operated to stabilize the IS process system, and the loop operation could be smoothly transferred to the continuous operation.

Deexcitation dynamics of muonic atoms revealed by high-precision spectroscopy of electronic X rays

Okumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I. H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.

Physical Review Letters, 127(5), p.053001_1 - 053001_7, 2021/07

https://doi.org/10.1103/PhysRevLett.127.053001

We observed electronic X rays emitted from muonic iron atoms using a superconducting transition-edge-type sensor microcalorimeter. The energy resolution of 5.2 eV in FWHM allowed us to observe the asymmetric broad profile of the electronic characteristic and X rays together with the hypersatellite X rays around 6 keV. This signature reflects the time-dependent screening of the nuclear charge by the negative muon and the -shell electrons, accompanied by electron side-feeding. Assisted by a simulation, this data clearly reveals the electronic - and -shell hole production and their temporal evolution during the muon cascade process.

Hydrogen production using thermochemical water-splitting iodine-sulfur process test facility made of industrial structural materials; Engineering solutions to prevent iodine precipitation

Noguchi, Hiroki; Kamiji, Yu; Tanaka, Nobuyuki; Takegami, Hiroaki; Iwatsuki, Jin; Kasahara, Seiji; Myagmarjav, O.; Imai, Yoshiyuki; Kubo, Shinji

International Journal of Hydrogen Energy, 46(43), p.22328 - 22343, 2021/06

https://doi.org/10.1016/j.ijhydene.2021.02.071

An iodine-sulfur process offers the potential for mass producing hydrogen with high-efficiency, and it uses high-temperature heat sources, including HTGR, solar heat, and waste heat of industries. R&D tasks are essential to confirm the integrity of the components that are made of industrial materials and the stability of hydrogen production in harsh working conditions. A test facility for producing hydrogen was constructed from corrosion-resistant components made of industrial materials. For stable hydrogen production, technical issues for instrumental improvements (i.e., stable pumping of the HIx solution, improving the quality control of glass-lined steel, prevention of I precipitation using a water removal technique in a Bunsen reactor) were solved. The entire process was successfully operated for 150 h at the rate of 30 L/h. The integrity of components and the operational stability of the hydrogen production facility in harsh working conditions were demonstrated.

Hydriodic iodide and iodine permeation characteristics of fluoropolymers as a lining material

Tanaka, Nobuyuki; Noguchi, Hiroki; Kamiji, Yu; Takegami, Hiroaki; Kubo, Shinji

International Journal of Hydrogen Energy, 45(35), p.17557 - 17561, 2020/07

https://doi.org/10.1016/j.ijhydene.2020.04.186

The thermochemical water-splitting iodine-sulfur (IS) process requires corrosion-resistant materials owing to usage of a mixture of HI-I-HO. Fluoropolymers, such as PTFE and PFA, are adaptable as lining materials for protecting plant components. However, there has been a concern: PTFE and PFA have the ability to permeate various permeants. From the viewpoint of corrosion, the permeation of HI and I should be evaluated to improve the integrity of the IS process. In this study, permeation tests on PTFE and PFA membranes were performed to measure the permeated fluxes of HI and I, and the effects of the operating conditions on them were investigated. The introduction of a permeability parameter could be successful for normalizing the permeated fluxes for a specific membrane thickness and a vapor pressure. Then, the empirical formula of the permeability was given as an Arrhenius-type equation to use as a plant design.

Reliability improvements of corrosion-resistant equipment for thermochemical water splitting hydrogen production iodine-sulfur process

Kamiji, Yu; Noguchi, Hiroki; Takegami, Hiroaki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji

Nuclear Engineering and Design, 361, p.110573_1 - 110573_6, 2020/05

https://doi.org/10.1016/j.nucengdes.2020.110573

JAEA has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the high-temperature gas-cooled reactors. The glass-lined steel is one of the candidate materials which has both corrosion resistance and structural strength. This paper reveals technical matters to improve reliability of the glass-lined steel equipment. It found that the improved glass-lined steel showed soundness in the process environment from the results of stress analyses for the glass layer by FEM, tests for heat cycle, bending load and corrosion.

Development of strength evaluation method of ceramic reactor for iodine-sulfur process and hydrogen production test in Japan Atomic Energy Agency

Takegami, Hiroaki; Noguchi, Hiroki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kamiji, Yu; Kasahara, Seiji; Imai, Yoshiyuki; Terada, Atsuhiko; Kubo, Shinji

Nuclear Engineering and Design, 360, p.110498_1 - 110498_6, 2020/04

https://doi.org/10.1016/j.nucengdes.2019.110498

Japan Atomic Energy Agency (JAEA) has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the high-temperature gas-cooled reactors. JAEA fabricated main chemical reactors made of industrial structural materials and confirmed their integrity in practical corrosive environments in the IS process. Based on the results of these confirmation tests, JAEA have constructed a 100 NL/h-H-scale test facility made of industrial structural materials. In this report, we succeeded in extending the hydrogen production time from 8 hours to 31 hours by developing a stable hydrogen iodide solution transfer technology in a continuous hydrogen production test. In addition, using the fracture test data of the ceramic specimen, an equation for estimating the strength of the ceramic component was developed.

Research and development on membrane IS process for hydrogen production using solar heat

Myagmarjav, O.; Iwatsuki, Jin; Tanaka, Nobuyuki; Noguchi, Hiroki; Kamiji, Yu; Ioka, Ikuo; Kubo, Shinji; Nomura, Mikihiro*; Yamaki, Tetsuya*; Sawada, Shinichi*; et al.

International Journal of Hydrogen Energy, 44(35), p.19141 - 19152, 2019/07

https://doi.org/10.1016/j.ijhydene.2018.03.132

Module design of silica membrane reactor for hydrogen production via thermochemical IS process

Myagmarjav, O.; Tanaka, Nobuyuki; Nomura, Mikihiro*; Kubo, Shinji

International Journal of Hydrogen Energy, 44(21), p.10207 - 10217, 2019/04

https://doi.org/10.1016/j.ijhydene.2019.02.192

Current R&D status of thermochemical water splitting hydrogen production iodine-sulfur process in Japan Atomic Energy Agency, 2; Reliability improvements of corrosion-resistant equipment

Kamiji, Yu; Noguchi, Hiroki; Takegami, Hiroaki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

Japan Atomic Energy Agency (JAEA) has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the HTGR. JAEA achieved continuous hydrogen production for one week with a hydrogen production rate of 30 NL/h by using a test apparatus made of glass and fluororesin material. Subsequently, JAEA fabricated main chemical reactors made of industrial materials and confirmed their integrity in corrosive environments in the IS process. Based on the results, JAEA has constructed a 100 NL/h-H-scale test facility made of industrial materials; one of the important materials is the glass-lined steel for corrosion resistant components such as vessels, pipes and protective sheaths of sensors. This report will present technical matters to improve reliability of the glass-lined protective sheaths of thermocouple. In addition, results of quality confirmation will be presented, which are stress analyses for the glass layer by FEM, tests for heat cycle, bending load and corrosion.