Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakashima, Yosuke*; Takeda, Hisahito*; Ichimura, Kazuya*; Hosoi, Katsuhiro*; Oki, Kensuke*; Sakamoto, Mizuki*; Hirata, Mafumi*; Ichimura, Makoto*; Ikezoe, Ryuya*; Imai, Tsuyoshi*; et al.
Journal of Nuclear Materials, 463, p.537 - 540, 2015/08
Times Cited Count：19 Percentile：82.55(Materials Science, Multidisciplinary)Nakashima, Yosuke*; Sakamoto, Mizuki*; Yoshikawa, Masayuki*; Oki, Kensuke*; Takeda, Hisahito*; Ichimura, Kazuya*; Hosoi, Katsuhiro*; Hirata, Mafumi*; Ichimura, Makoto*; Ikezoe, Ryuya*; et al.
Proceedings of 25th IAEA Fusion Energy Conference (FEC 2014) (CD-ROM), 8 Pages, 2014/10
Murakami, Haruyuki; Kizu, Kaname; Tsuchiya, Katsuhiko; Koide, Yoshihiko; Yoshida, Kiyoshi; Obana, Tetsuhiro*; Takahata, Kazuya*; Hamaguchi, Shinji*; Chikaraishi, Hirotaka*; Natsume, Kyohei*; et al.
IEEE Transactions on Applied Superconductivity, 24(3), p.4200205_1 - 4200205_5, 2014/06
Times Cited Count：25 Percentile：72.88(Engineering, Electrical & Electronic)Central Solenoid (CS) of JT-60SA are designed with the Nb
Sn cable in conduit conductor. CS model coil (CSMC) was manufactured by using the real manufacturing jigs and procedure to validate the CS manufacturing processes before starting mass production. The dimensions of the CSMC are the same as real quad-pancake. The cold test of the CSMC was performed and the test results satisfied the design requirements. These results indicate that the manufacturing processes of the JT-60SA CS has been established. In this paper, the development and the validation of the CS manufacturing processes are described.
Kizu, Kaname; Murakami, Haruyuki; Tsuchiya, Katsuhiko; Yoshida, Kiyoshi; Nomoto, Kazuhiro*; Imai, Yoshio*; Minato, Tsuneaki*; Obana, Tetsuhiro*; Hamaguchi, Shinji*; Takahata, Kazuya*
IEEE Transactions on Applied Superconductivity, 23(3), p.4200104_1 - 4200104_4, 2013/06
Times Cited Count：23 Percentile：70.98(Engineering, Electrical & Electronic)The maximum magnetic field, current and voltage of CS for JT-60SA are 8.9 T, 20 kA and 10 kV, respectively. NbSn conductor with high field and high current density was developed. The outer diameter and height of CS are 2 and 1.6 m, respectively. Several components were newly developed and tested. To increase the supplying flux, winding diameter should be maximized as possible. The butt type joint was developed that can minimize the joint space. DGEBA epoxy used for main binder of insulation showed sufficient tensile strength even though the 
ray irradiation of 100 kGy. Insulation characteristics of 4
4 stack sample applying double of operational stress with operational cycle showed the larger withstand voltage than 21 kV. According to these results, the fabrication of CS can be started.
Hasegawa, Mitsuru*; Horii, Hiroyuki*; Nomoto, Kazuhiro*; Imai, Yoshio*; Murai, Takashi*; Minato, Tsuneaki*; Kuno, Kazuo*; Tsuchiya, Katsuhiko; Murakami, Haruyuki; Kizu, Kaname; et al.
Proceedings of 24th International Cryogenic Engineering Conference (ICEC 24) and International Cryogenic Materials Conference 2012 (ICMC 2012) (CD-ROM), p.571 - 574, 2012/05
JT-60U magnet system will be upgraded to the superconducting coils (JT-60SA) in the Broader Approach project. JT-60SA magnet system has 18 Toroidal Field coils, a Central Solenoid with 4 modules and 6 Equilibrium Field (EF) coils. This paper describes the manufacturing procedure of EF4 coil, that is the first manufactured EF coil of JT-60SA. The winding pack of EF4 coil was successfully manufactured within geometrical tolerance requirements.
Murakami, Haruyuki; Kizu, Kaname; Kamiya, Koji; Tsuchiya, Katsuhiko; Koide, Yoshihiko; Yoshida, Kiyoshi; Obana, Tetsuhiro*; Takahata, Kazuya*; Hamaguchi, Shinji*; Chikaraishi, Hirotaka*; et al.
no journal, ,
no abstracts in English
