Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Iketani, Shotaro; Yokobori, Tomohiko; Ishikawa, Joji; Yasuhara, Toshiyuki*; Kozawa, Toshiyuki*; Takaizumi, Hirohide*; Momma, Takeshi*; Kurosawa, Shingo*; Iseda, Hirokatsu; Kishimoto, Katsumi; et al.
JAEA-Review 2018-016, 46 Pages, 2018/12
JAEA-Review-2018-016.pdf:12.79MB
Japan Atomic Energy Agency (JAEA) adopts melting process for the waste processing and packaging method of radioactive miscellaneous solid waste in NSRI because melting process is effective in radioactivity evaluation, volume reduction, and stabilization treatment. Metal melting processing facilities, Incinerator, and Nonmetal melting processing facilities (hereinafter referred to as melting process facilities) have taken lots of safety measures, including measures for preventing the recurrence of the fire accidents. To exchange opinions and discuss the validity of these measures and so on with internal personnel and external experts, "Discussions on Melting Process Facilities" was held. As a document collection, this paper summarizes presentation materials of discussion meetings. Presentation materials describe "Outline of AVRF", "Safety measures in the melting facilities in WVRF", "Operation management of the melting facilities in WVRF", "Comparison of the past accident cases between facilities in and outside Japan and WVRF", and "Introduction of past accident cases and safety measures in other facilities from each committee".
Ishihara, Keisuke; Yokota, Akira; Kanazawa, Shingo; Iketani, Shotaro; Sudo, Tomoyuki; Myodo, Masato; Irie, Hirobumi; Kato, Mitsugu; Iseda, Hirokatsu; Kishimoto, Katsumi; et al.
JAEA-Technology 2016-024, 108 Pages, 2016/12
JAEA-Technology-2016-024.pdf:29.74MB
Radioactive isotope, nuclear fuel material and radiation generators are utilized in research institutes, universities, hospitals, private enterprises, etc. As a result, various low-level radioactive wastes (hereinafter referred to as non-nuclear radioactive wastes) are produced. Disposal site for non-nuclear radioactive wastes have not been settled yet and those wastes are stored in storage facilities of each operator for a long period. The Advanced Volume Reduction Facilities (AVRF) are built to produce waste packages so that they satisfy requirements for shallow underground disposal. In the AVRF, low-level beta-gamma solid radioactive wastes produced in the Nuclear Science Research Institute are mainly treated. To produce waste packages meeting requirements for disposal safely and efficiently, it is necessary to cut large radioactive wastes into pieces of suitable size and segregate those depending on their types of material. This report summarizes activities of pretreatment to dispose of non-nuclear radioactive wastes in the AVRF.
Nakashio, Nobuyuki; Osugi, Takeshi; Iseda, Hirokatsu; Tohei, Toshio; Sudo, Tomoyuki; Ishikawa, Joji; Mitsuda, Motoyuki; Yokobori, Tomohiko; Kozawa, Kazushige; Momma, Toshiyuki; et al.
Journal of Nuclear Science and Technology, 53(1), p.139 - 145, 2016/01
Times Cited Count：1 Percentile：10.71(Nuclear Science & Technology)no abstracts in English
Tohei, Toshio; Nakashio, Nobuyuki; Osugi, Takeshi; Ishikawa, Joji; Mizoguchi, Takafumi; Hanawa, Ritsu; Someya, Keita*; Takahashi, Kenji*; Iseda, Hirokatsu; Kozawa, Kazushige; et al.
JAEA-Technology 2010-008, 28 Pages, 2010/06
JAEA-Technology-2010-008.pdf:5.0MB
The Waste Volume Reduction Facility (WVRF) was constructed for volume reduction and the chemical stabilization of the low level radioactive waste in the Nuclear Science Research Institute of JAEA. The metal melting system in the WVRF treats radioactive metal waste. From the experience of trial operations, the improvement has conducted on the casting process in the metal melting system. The performance of the improved casting process was verified through the trial operations from Oct. 2008. In this report, we describe the reduction of the processing time, of the utilities consumption, of the load of maintenance on the improved casting process.
Tohei, Toshio; Someya, Keita; Takahashi, Kenji; Iseda, Hirokatsu; Kozawa, Kazushige; Momma, Toshiyuki
JAEA-Technology 2009-031, 29 Pages, 2009/06
JAEA-Technology-2009-031.pdf:21.66MB
The Waste Volume Reduction Facility (WVRF) was constructed for volume reduction and the chemical stabilization of the low level radioactive waste (LLW). The metal melting system in the WVRF treats radioactive metal waste. This system has been conducted commissioning since the FY 2003. It was found, from the experience of commissioning, that the improvement of casting process in the metal melting system can be reduced the processing cost, maintenance load, and dose to workers. We planed modification of the device, and embodied from FY 2006 to FY 2007. As a result, we properly improved the casting process. In this report, we describe the idea for improvement of the casting process, the detail of improvement and the estimate of improvement.
Higuchi, Hidekazu; Osugi, Takeshi; Nakashio, Nobuyuki; Momma, Toshiyuki; Tohei, Toshio; Ishikawa, Joji; Iseda, Hirokatsu; Mitsuda, Motoyuki; Ishihara, Keisuke; Sudo, Tomoyuki; et al.
JAEA-Technology 2007-038, 189 Pages, 2007/07
JAEA-Technology-2007-038-01.pdf:15.13MBJAEA-Technology-2007-038-02.pdf:38.95MBJAEA-Technology-2007-038-03.pdf:48.42MBJAEA-Technology-2007-038-04.pdf:20.53MBJAEA-Technology-2007-038-05.pdf:10.44MB
The Advanced Volume Reduction Facilities (AVRF) is constructed to manufacture the waste packages of radioactive waste for disposal in the Nuclear Science Research Institute of the Japan Atomic Energy Agency. The AVRF is constituted from two facilities. The one is the Waste Size Reduction and Storage Facility (WSRSF) which is for reducing waste size, sorting into each material and storing the waste package. The other is the Waste Volume Reduction Facility (WVRF) which is for manufacturing the waste package by volume reducing treatment and stabilizing treatment. WVRF has an induction melting furnace, a plasma melting furnace, an incinerator, and a super compactor for treatment. In this report, we summarized about the basic concept of constructing AVRF, the constitution of facilities, the specifications of machineries and the state of trial operation until March of 2006.
Sono, Hiroki; Tsukamoto, Michio; Aizawa, Eiju; Takeuchi, Masaki; Fukaya, Yuji; Iseda, Hirokatsu*; Ogawa, Kazuhiko; Sakuraba, Koichi; Tonoike, Kotaro
UTNL-R-0446, p.3_1 - 3_10, 2005/03
This report describes an investigation and countermeasures of the unexpected reactor shutdown of the TRACY facility at the Japan Atomic Energy Research Institute on June 17, 2004, caused by a malfunction of a safety rod of the facility. As a result of the investigation, the principal cause of the malfunction was ascribed to a drop in attraction of a binding magnet for the safety rod by a small piece of a foreign material. The following countermeasures were taken against its recurrence: prevention of incidence of foreign materials, reduction of the chance of intrusion of foreign materials into devices, and certain detection of foreign materials. This lesson learned through the experience is expected to be shared with the staffs concerned in reactor operation and maintenance.
Ishikawa, Joji; Nakashio, Nobuyuki; Osugi, Takeshi; Iseda, Hirokatsu; Mizoguchi, Takafumi; Kozawa, Kazushige; Momma, Toshiyuki
no journal, ,
no abstracts in English
Osugi, Takeshi; Nakashio, Nobuyuki; Iseda, Hirokatsu; Hanawa, Ritsu; Kozawa, Kazushige; Momma, Toshiyuki
no journal, ,
no abstracts in English
Nakashio, Nobuyuki; Osugi, Takeshi; Iseda, Hirokatsu; Sudo, Tomoyuki; Kozawa, Kazushige; Momma, Toshiyuki
no journal, ,
no abstracts in English
Nakashio, Nobuyuki; Osugi, Takeshi; Iseda, Hirokatsu; Koakutsu, Takanori; Okoshi, Minoru; Tokizawa, Takayuki; Nakayama, Shinichi; Kimura, Takeshi*
no journal, ,
no abstracts in English
Suda, Shoya; Kosuge, Atsushi; Kisohara, Naoyuki; Fujii, Mitsuki; Masai, Seita; Iseda, Hirokatsu; Minehara, Eisuke*
no journal, ,
