Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 168

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Development of a non-destructive depth-selective quantification method for sub-percent carbon contents in steel using negative muon lifetime analysis

Ninomiya, Kazuhiko*; Kubo, Kenya*; Inagaki, Makoto*; Yoshida, Go*; Chiu, I.-H. ; Kudo, Takuto*; Asari, Shunsuke*; Sentoku, Sawako*; Takeshita, Soshi*; Shimomura, Koichiro*; et al.

Scientific Reports (Internet), 14, p.1797_1 - 1797_8, 2024/01

The amount of C in steel, which is critical in determining its properties, is strongly influenced by steel production technology. We propose a novel method of quantifying the bulk C content in steel non-destructively using muons. This revolutionary method may be used not only in the quality control of steel in production, but also in analyzing precious steel archaeological artifacts. A negatively charged muon forms an atomic system owing to its negative charge, and is finally absorbed into the nucleus or decays to an electron. The lifetimes of muons differ significantly, depending on whether they are trapped by Fe or C atoms, and identifying the elemental content at the muon stoppage position is possible via muon lifetime measurements. The relationship between the muon capture probabilities of C/Fe and the elemental content of C exhibits a good linearity, and the C content in the steel may be quantitatively determined via muon lifetime measurements. Furthermore, by controlling the incident energies of the muons, they may be stopped in each layer of a stacked sample consisting of three types of steel plates with thicknesses of 0.5 mm, and we successfully determined the C contents in the range 0.20 - 1.03 wt% depth-selectively, without sample destruction.

Journal Articles

Predictive and inverse modeling of a radionuclide diffusion experiment in crystalline rock at ONKALO (Finland)

Soler, J. M.*; Kek$"a$l$"a$inen, P.*; Pulkkanen, V.-M.*; Moreno, L.*; Iraola, A.*; Trinchero, P.*; Hokr, M.*; $v{R}$$'i$ha, J.*; Havlov$'a$, V.*; Trpko$v{s}$ov$'a$, D.*; et al.

Nuclear Technology, 209(11), p.1765 - 1784, 2023/11

Journal Articles

Outlining zircon growth in a granitic pluton using 3D cathodoluminescence patterns, U-Pb age, titanium concentration, and Th/U; Implications for the magma chamber process of Okueyama granite, Kyushu, Japan

Yuguchi, Takashi*; Ito, Daichi*; Yokoyama, Tatsunori; Sakata, Shuhei*; Suzuki, Satoshi*; Ogita, Yasuhiro; Yagi, Koshi*; Imura, Takumi*; Motai, Satoko*; Ono, Takeshi*

Lithos, 440-441, p.107026_1 - 107026_14, 2023/03

 Times Cited Count:0 Percentile:0.02(Geochemistry & Geophysics)

We propose a new method for elucidating zircon growth in granitic plutons, based on variations in three-dimensional 3D cathodoluminescence (CL) patterns, U-Pb ages, titanium concentration, and Th/U ratios. We focused on the zircon growth processes in the Okueyama granite (OKG) in central Kyushu, Japan, to obtain interpretations of magma chamber processes that result in the formation of granitic plutons. The OKG consists of three lithofacies: biotite granite (BG), hornblende granite (HG), and hornblende granodiorite (HGD). To determine the 3D internal structure and growth pattern of a zircon crystal, we performed CL observations for multi-sections of the samples. Simultaneously, we also determined the zircon U-Pb age and titanium concentration of the center sections of the samples. The 3D distribution of the oscillatory zoning can be used to determine the crystal nucleus. The simultaneous determination of zircon U-Pb ages and Ti concentrations of the granite samples indicates the time-temperature (t-T) history of granitic magma before its solidification. The t-T histories of the BG, HG, and HGD represented similar cooling behaviors within the magma chamber: rapid cooling from the zircon crystallization temperature to the closure temperature of the biotite K-Ar system between 16 Ma and 10 Ma. The variations in the Th/U ratios against temperature also demonstrate a different trend at the boundary of approximately 670 $$^{circ}$$C. Fractional crystallization in the magma chamber progressed significantly at temperatures above 670 $$^{circ}$$C; below 670 $$^{circ}$$C, crystallization progressed slowly, indicating only minimal changes in the magma composition. The variations in the Th/U ratio against temperature in the BG, HG, and HGD portrayed common tendencies, indicating the same behavior in the progression of fractional crystallization among the three lithofacies, which in turn, represented the same behavior within the entire magma chamber.

Journal Articles

Modelling of the LTDE-SD radionuclide diffusion experiment in crystalline rock at the $"A$sp$"o$ Hard Rock Laboratory (Sweden)

Soler, J. M.*; Meng, S.*; Moreno, L.*; Neretnieks, I.*; Liu, L.*; Kek$"a$l$"a$inen, P.*; Hokr, M.*; $v{R}$$'i$ha, J.*; Vete$v{s}$n$'i$k, A.*; Reimitz, D.*; et al.

Geologica Acta, 20(7), 32 Pages, 2022/07

 Times Cited Count:2 Percentile:60.41(Geology)

Task 9B of the SKB Task Force on Modelling of Groundwater Flow and Transport of Solutes in fractured rock focused on the modelling of experimental results from the LTDE-SD in situ tracer test performed at the $"A$sp$"o$ Hard Rock Laboratory in Sweden. Ten different modelling teams provided results for this exercise, using different concepts and codes. Three main types of modelling approaches were used: (1) analytical solutions to the transport-retention equations, (2) continuum-porous-medium numerical models, and (3) microstructure-based models accounting for small-scale heterogeneity (i.e. mineral grains and microfracture distributions). The modelling by the different teams allowed the comparison of many different model concepts, especially in terms of potential zonations of rock properties (porosity, diffusion, sorption), such as the presence of a disturbed zone at the rock and fracture surface, the potential effects of micro- and cm-scale fractures.

Journal Articles

Predictive modeling of a simple field matrix diffusion experiment addressing radionuclide transport in fractured rock. Is it so straightforward?

Soler, J. M.*; Neretnieks, I.*; Moreno, L.*; Liu, L.*; Meng, S.*; Svensson, U.*; Iraola, A.*; Ebrahimi, K.*; Trinchero, P.*; Molinero, J.*; et al.

Nuclear Technology, 208(6), p.1059 - 1073, 2022/06

 Times Cited Count:3 Percentile:47.54(Nuclear Science & Technology)

The SKB Task Force is an international forum on modelling of groundwater flow and solute transport in fractured rock. The WPDE experiments are matrix diffusion experiments in gneiss performed at the ONKALO underground facility in Finland. Synthetic groundwater containing several conservative and sorbing tracers was injected along a borehole interval. The objective of Task 9A was the predictive modelling of the tracer breakthrough curves from the WPDE experiments. Several teams, using different modelling approaches and codes, participated in this exercise. An important conclusion from this exercise is that the modelling results were very sensitive to the magnitude of dispersion in the borehole opening, which is related to the flow of water. Focusing on the tails of the breakthrough curves, which are more directly related to matrix diffusion and sorption, the results from the different teams were more comparable.

Journal Articles

Evaluation report of Task 9C based on comparisons and analyses of modelling results for the ONKALO REPRO-TDE experiment

Soler, J. M.*; Kek$"a$l$"a$inen, P.*; Pulkkanen, V.-M.*; Moreno, L.*; Iraola, A.*; Trinchero, P.*; Hokr, M.*; $v{R}$$'i$ha, J.*; Havlov$'a$, V.*; Trpko$v{s}$ov$'a$, D.*; et al.

SKB TR-21-09, 204 Pages, 2021/11

Journal Articles

A Scaling approach for retention properties of crystalline rock; Case study of the in-situ long-term sorption and diffusion experiment (LTDE-SD) at the $"A$sp$"o$ Hard Rock Laboratory in Sweden

Tachi, Yukio; Ito, Tsuyoshi*; Gylling, B.*

Water Resources Research, 57(11), p.e2020WR029335_1 - e2020WR029335_20, 2021/11

 Times Cited Count:2 Percentile:19.4(Environmental Sciences)

This paper focuses on the scaling approach for sorption and diffusion parameters from laboratory to in-situ conditions using the dataset of LTDE-SD experiment performed at the $"A$sp$"o$ HRL. The near-surface heterogeneities at both fracture surface and rock matrix could be evaluated by conceptual model with high porosity and diffusivity, and sorption capacity, and their gradual change at the near-surface zones. The modelling results for non-sorbing Cl-36 and weak-sorbing Na-22 could validate the model concept and the parameter estimation of porosity and diffusivity, by considering the disturbed zone of 5 mm thickness with gradual parameter changes. The De values of these cationic and anionic tracers showed typical cation excess and anion exclusion effects. The modelling results for high sorbing tracers (Cs-137, Ra-226, Ni-63 and Np-237) with different sorption mechanism could confirm the validity of the scaling approaches of Kd values as a function of particle size and their relation to the near-surface disturbances.

Journal Articles

Evaluation report of Task 9B based on comparisons and analyses of modelling results for the $"A$sp$"o$ HRL LTDE-SD experiments

Soler, J. M.*; Meng, S.*; Moreno, L.*; Neretnieks, I.*; Liu, L.*; Kek$"a$l$"a$inen, P.*; Hokr, M.*; $v{R}$$'i$ha, J.*; Vete$v{s}$n$'i$k, A.*; Reimitz, D.*; et al.

SKB TR-20-17, 71 Pages, 2021/07

Task 9B of the SKB Task Force on Modelling of Groundwater Flow and Transport of Solutes in fractured rock focused on the modelling of experimental results from the LTDE-SD in situ tracer test performed at the $"A$sp$"o$ Hard Rock Laboratory in Sweden. Ten different modelling teams provided results for this exercise, using different concepts and codes. Three main types of modelling approaches were used: (1) analytical solutions to the transport-retention equations, (2) continuum-porous-medium numerical models, and (3) microstructure-based models accounting for small-scale heterogeneity (i.e. mineral grains and microfracture distributions). The modelling by the different teams allowed the comparison of many different model concepts, especially in terms of potential zonations of rock properties (porosity, diffusion, sorption), such as the presence of a disturbed zone at the rock and fracture surface, the potential effects of micro- and cm-scale fractures.

Journal Articles

Simultaneous determination of zircon U-Pb age and titanium concentration using LA-ICP-MS for crystallization age and temperature

Yuguchi, Takashi*; Ishibashi, Kozue*; Sakata, Shuhei*; Yokoyama, Tatsunori; Ito, Daichi*; Ogita, Yasuhiro; Yagi, Koshi*; Ono, Takeshi*

Lithos, 372-373, p.105682_1 - 105682_9, 2020/11

 Times Cited Count:2 Percentile:14.63(Geochemistry & Geophysics)

Simultaneous determination of zircon U-Pb age and titanium concentration for a single analysis spot gives both the crystallization age and temperature. The crystallization age and temperature pairs in granitic zircons map the time-temperature ($$t-T$$) path of granitic magma before its solidification. In laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analysis, it is challenging to quantitatively analyse a low level of titanium concentration. This study employed two approaches using a Quadrupole mass spectrometer equipped with a collision/reaction cell (CRC). The methods were applied to zircon samples of the Kurobegawa granite (KRG), the Okueyama granite (OKG), the Toki granite (TKG), and the Tono plutonic complex (TPC) and provided U-Pb ages and titanium concentrations consistent with previous studies. The crystallization ages and temperatures collected from individual analysis spots of zircon samples in the KRG, OKG, TKG, and TPC are plotted in the $$t-T$$ diagrams and enable us to characterize the rapid cooling paths at thermal conditions of zircon crystallization at the sampling sites.

Journal Articles

Evaluation and modelling report of Task 9A based on comparisons and analyses of predictive modelling results for the REPRO WPDE experiments; Task 9 of SKB Task Force GWFTS - Increasing the realism in solute transport modelling based on the field experiments REPRO and LTDE-SD

Soler, J. M.*; Neretnieks, I.*; Moreno, L.*; Liu, L.*; Meng, S.*; Svensson, U.*; Trinchero, P.*; Iraola, A.*; Ebrahimi, H.*; Molinero, J.*; et al.

SKB R-17-10, 153 Pages, 2019/01

The SKB Task Force is an international forum on modeling of groundwater flow and solute transport in fractured rock. The WPDE experiments are matrix diffusion experiments in gneiss performed at the ONKALO underground facility in Finland. Synthetic groundwater containing several conservative and sorbing tracers was injected along a borehole interval. The objective of Task 9A was the predictive modeling of the tracer breakthrough curves from the WPDE experiments. Several teams, using different modelling approaches, participated in this exercise. An important conclusion from this exercise is that the modeling results were very sensitive to the magnitude of dispersion in the borehole opening, which is related to the flow of water. Focusing on the tails of the breakthrough curves, which are more directly related to matrix diffusion and sorption, the results from the different teams were more comparable. The modeling results have also been finally compared to the measured breakthroughs.

Journal Articles

Effects of fine-scale surface alterations on tracer retention in a fractured crystalline rock from the Grimsel Test Site

Tachi, Yukio; Ito, Tsuyoshi*; Akagi, Yosuke*; Sato, Hisao*; Martin, A. J.*

Water Resources Research, 54(11), p.9287 - 9305, 2018/11

 Times Cited Count:5 Percentile:26.98(Environmental Sciences)

Effects of fine-scale surface alterations on radionuclide migration in fractured crystalline rocks were investigated by a comprehensive approach coupling a series of laboratory tests, microscopic observations and modelling, using a single fractured granodiorite sample from the Grimsel Test Site, Switzerland. Laboratory tests including through-diffusion, batch sorption and flow-through tests using five tracers indicated that tracer retention was consistently in the sequence of HDO, Se, Cs, Ni, Eu, and as well as showing the existence of a diffusion-resistance layer near the fracture surface, cation excess and anion exclusion effects for diffusion. Microscale heterogeneities in structural properties around the fracture were clarified quantitatively by coupling X-ray CT and EPMA. A three layer model including weathered vermiculite, foliated mica and undisturbed matrix layers, and their properties such as porosity, sorption and diffusion parameters, could provide a reasonable interpretation for breakthrough curves and concentration distributions near fracture surface of all tracers, measured in flow-through tests.

Journal Articles

The Development of a non-destructive analysis system with negative muon beam for industrial devices at J-PARC MUSE

Tampo, Motonobu*; Hamada, Koji*; Kawamura, Naritoshi*; Inagaki, Makoto*; Ito, Takashi; Kojima, Kenji*; Kubo, Kenya*; Ninomiya, Kazuhiko*; Strasser, P.*; Yoshida, Go*; et al.

JPS Conference Proceedings (Internet), 8, p.036016_1 - 036016_6, 2015/09

Journal Articles

The Observation of a transient surface morphology in the femtosecond laser ablation process by using the soft X-ray laser probe

Hasegawa, Noboru; Nishikino, Masaharu; Tomita, Takuro*; Onishi, Naofumi*; Ito, Atsushi*; Eyama, Tsuyoshi*; Kakimoto, Naoya*; Izutsu, Rui*; Minami, Yasuo*; Baba, Motoyoshi*; et al.

X-Ray Lasers and Coherent X-Ray Sources; Development and Applications XI (Proceedings of SPIE, Vol.9589), p.95890A_1 - 95890A_8, 2015/09

 Times Cited Count:1 Percentile:55.61

We have improved a soft X-ray laser (SXRL) interferometer synchronized with a Ti:Sapphire laser pulse to observe the single-shot imaging of the nano-scaled structure dynamics of the laser induced materials. By the precise imaging optics and double time fiducial system having been installed, the lateral resolution on the sample surface and the precision of the temporal synchronization between the SXRL and Ti:Sapphire laser pulses were improved to be 700 nm and 2 ps, respectively. By using this system, the initial stage (before 200 ps) of the ablation process of the Pt surface pumped by 80 fs Ti:Sapphire laser pulse was observed by the comparison between the soft X-ray reflective image and interferogram. We have succeeded in the direct observation of the unique ablation process around the ablation threshold such as the rapid increase of the surface roughness and surface vibration.

Journal Articles

Observation of the dependence on the fluence and materials in femto-second laser ablation process by using the soft X-ray laser probe

Hasegawa, Noboru; Tomita, Takuro*; Nishikino, Masaharu; Eyama, Tsuyoshi*; Kakimoto, Naoya*; Minami, Yasuo*; Baba, Motoyoshi*; Onishi, Naofumi*; Ito, Atsushi*; Kawachi, Tetsuya; et al.

JAEA-Conf 2015-001, p.17 - 20, 2015/07

We have succeeded in simultaneous observation of the ablation front and the expansion front with thin filmy structure in the femto-second laser ablation process of a gold target by using the 13.9 nm soft X-ray probe (incident angle to the sample $$sim$$ 70 deg) with soft X-ray interferometer. The dependence on the laser local fluence and materials was obtained by the comparison between gold and tungsten.

Journal Articles

Current post irradiation examination techniques at the JMTR Hot laboratory

Shibata, Akira; Kato, Yoshiaki; Oishi, Makoto; Taguchi, Taketoshi; Ito, Masayasu; Yonekawa, Minoru; Kawamata, Kazuo

KAERI/GP-418/2015, p.151 - 165, 2015/05

The JMTR stopped its operation in 2006 for refurbishment. The reactor facilities have been refurbished from 2007. After refurbishment, JMTR Hot laboratory is expected to perform various post irradiation examinations. In this report, installations of experimental apparatuses and recent experimental method are introduced. (1) A nano-indenter with radius spherical indenter. Inverse analysis using FEM could presume material constants from load-depth curve of indentation. Mechanical properties of oxide layer of zirconium alloy and irradiated stainless steel will be analyzed. (2) Transmission Electron Microscope (TEM). TEM is capable of imaging at a significantly higher resolution than light microscopes or normal SEM. JAEA installed a TEM apparatus (JEOL JEM-2800) in JMTR Hot laboratory. The maximum magnification is 150,000,000 times. It can be operated from a remote location using a computer network. This contributes to the convenience of remote researchers and reducing the amount of exposure.

Journal Articles

Observation of femtosecond laser ablation on Tungsten by using soft X-ray reflection and interference imaging

Nishikino, Masaharu; Hasegawa, Noboru; Tomita, Takuro*; Eyama, Tsuyoshi*; Kakimoto, Naoya*; Onishi, Naofumi*; Ito, Atsushi*; Baba, Motoyoshi*; Minami, Yasuo*; Kawachi, Tetsuya; et al.

Reza Gakkai Dai-471-Kai Kenkyukai Hokoku; Tanhacho Ryoshi Bimu Hassei To Sono Oyo, p.9 - 12, 2014/12

no abstracts in English

Journal Articles

Edge radial electric field formation after the L-H transition on JT-60U

Kamiya, Kensaku; Matsunaga, Go; Honda, Mitsuru; Miyato, Naoaki; Urano, Hajime; Kamada, Yutaka; Ida, Katsumi*; Ito, Kimitaka*; JT-60 Team

Contributions to Plasma Physics, 54(4-6), p.591 - 598, 2014/06

 Times Cited Count:6 Percentile:30(Physics, Fluids & Plasmas)

no abstracts in English

Journal Articles

Self-radiation effects and glassy nature of magnetic transition in AmO$$_2$$ revealed by $$^{17}$$O-NMR

Tokunaga, Yo; Nishi, Tsuyoshi; Nakada, Masami; Ito, Akinori*; Sakai, Hironori; Kambe, Shinsaku; Homma, Yoshiya*; Honda, Fuminori*; Aoki, Dai*; Walstedt, R. E.*

Physical Review B, 89(21), p.214416_1 - 214416_8, 2014/06

 Times Cited Count:7 Percentile:32.13(Materials Science, Multidisciplinary)

The magnetic phase transition near $$T_0=8.5$$ K in AmO$$_2$$ has been investigated microscopically by means of $$^{17}$$O NMR. To avoid complexities arising from sample aging associated with the alpha decay of $$^{243}$$Am, all measurements have been performed within 40 days after sample synthesis. Even during such a short period, however, a rapid change of NMR line shape has been observed at 1.5 K, suggesting that the ground state of AmO$$_2$$ is very sensitive to disorder. We have also confirmed the loss of $$^{17}$$O NMR signal intensity over a wide temperature range below $$T_0$$, and more than half of oxygen nuclei are undetectable at 1.5 K. This behavior reveals the persistence of slow and distributed spin fluctuations down to temperatures well below $$T_0$$. In the paramagnetic state, strong NMR line broadening and spatially inhomogeneous spin fluctuations have been observed. The results are all indicative of short-range, spin-glass-like character for the magnetic transition in this system.

JAEA Reports

Mizunami Underground Research Laboratory Project, Annual report for fiscal year 2012

Hama, Katsuhiro; Mikake, Shinichiro; Nishio, Kazuhisa; Matsuoka, Toshiyuki; Ishibashi, Masayuki; Sasao, Eiji; Hikima, Ryoichi*; Tanno, Takeo*; Sanada, Hiroyuki; Onoe, Hironori; et al.

JAEA-Review 2013-050, 114 Pages, 2014/02

JAEA-Review-2013-050.pdf:19.95MB

Japan Atomic Energy Agency (JAEA) at Tono Geoscience Center (TGC) is pursuing a geoscientific research and development project namely the Mizunami Underground Research Laboratory (MIU) Project in crystalline rock environment in order to construct scientific and technological basis for geological disposal of High-level Radioactive Waste (HLW). The MIU Project has three overlapping phases: Surface-based Investigation phase (Phase I), Construction phase (Phase II), and Operation phase (Phase III). The MIU Project has been ongoing the Phase II and the Phase III in fiscal year 2012. This report presents the results of the investigations, construction and collaboration studies in fiscal year 2012, as a part of the Phase II and Phase III based on the MIU Master Plan updated in 2010.

Journal Articles

Evaluation of applicability on multi-axis residual stress formed by hard sphere indentation for stress corrosion cracking test

Ioka, Ikuo; Kiuchi, Kiyoshi*; Takizawa, Masayuki*; Ito, Takeshi*

Nihon Kinzoku Gakkai-Shi, 78(1), p.16 - 22, 2014/01

 Times Cited Count:0 Percentile:0.01(Metallurgy & Metallurgical Engineering)

A multi-axis stress field is indispensable to quick and quantitative evaluation of stress corrosion cracking for constructional materials and weld joints of existing industrial plants. The applicability of multi-axis residual stress field into SCC tests was evaluated. The hard sphere ball was stuffed into small flat-plate of type 304SS. Numerical analysis was conducted in order to compare with the experimental results. The numerical analysis was comparatively in agreement with the experimental results. Parameters of the test were selected by numerical analysis to optimize the residual stress of specimen. SCC test in MgCl$$_{2}$$ was performed using the specimen with optical residual stress condition. It is confirmed that the multi-axis residual stress field was useful in quick and quantitative SCC test by comparing the initiation of cracks with the distribution of residual stress obtained by numerical analysis.

168 (Records 1-20 displayed on this page)