Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 35

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Outline of Japan Atomic Energy Agency's Okuma Analysis and Research Center, 3; Laboratory-2

Ito, Masayasu; Ogawa, Miho; Inoue, Toshihiko; Yoshimochi, Hiroshi; Koyama, Shinichi; Koyama, Tomozo; Nakayama, Shinichi

Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 7 Pages, 2017/00

Laboratory-2 of the Okuma Analysis and Research Center will be used for the technological development of techniques to treat and dispose fuel debris, etc. The specific analytical content and its importance has been discussed by an experts committee in FY 2016. The committee regarded fuel debris retrieval and criticality control related topics as the most important content. As a result, it will be a priority to introduce equipment to perform examination such as shape and size measurement, compositional and nuclide analysis, hardness and toughness test, and radiation dose rate measurement. In addition, since sample will have high dose rates (1 Sv/h or more) at the time of reception, hot cells with enough radiation shielding ability will be used. In the hot cell, the pre-processing will be performed, such as cutting and dissolution of samples. Processed samples will be examined in concrete cells, steel cells, glove boxes and fume hoods. Detail design of Laboratory-2 started on FY 2017.

Journal Articles

Study on magnetic property change on neutron irradiated austenitic stainless steel

Nemoto, Yoshiyuki; Oishi, Makoto; Ito, Masayasu; Kaji, Yoshiyuki; Keyakida, Satoshi*

Hozengaku, 14(4), p.83 - 90, 2016/01

Authors previously reported that magnetic data obtained by using Eddy current method and AC magnetization method showed correlation with the increase of susceptibility of the irradiation assisted stress corrosion cracking (IASCC) on neutron irradiated austenitic stainless alloy specimens. To discuss the mechanism of the correlation, microstructure observation was conducted on the irradiated specimen, and magnetic permalloy phase (FeNi$$_{3}$$) formation along grain boundary was revealed in this work. From this result, the radiation induced magnetic phase formation along grain boundary seems to be a factor of the magnetic property change of the irradiated materials, and related to the correlation between magnetic data and IASCC susceptibility. In addition, sensor probe development was conducted in this work to obtain higher sensitivity and resolution. It was applied for magnetic measurement on type304 stainless steel irradiated up to different doses. In this case, magnetic ferrite phase was existed in the type304 stainless steel sample before irradiation therefore it was concerned that magnetic measurement on the irradiated ones would be disturbed by the magnetic signal from the pre-existing ferrite phase. In the magnetic measurements, increase of the magnetic data was clearly seen on the irradiated specimens. Thus, it was thought that the developed magnetic measurement technics can be applied for the irradiated austenite stainless steels which contain certain quantity of ferrite phase before irradiation.

Journal Articles

Study on magnetic property change on neutron irradiated austenitic stainless steel

Nemoto, Yoshiyuki; Oishi, Makoto; Ito, Masayasu; Kaji, Yoshiyuki

Nihon Hozen Gakkai Dai-12-Kai Gakujutsu Koenkai Yoshishu, p.105 - 112, 2015/07

Authors previously reported that Eddy current method and AC magnetization method have potential to be applied for development of diagnostic technics to detect the sign of material degradation before cracking on the austenitic stainless steels used as structural material in nuclear power plants. In typical austenitic stainless steels such as type304, magnetic ferrite phase would exist in the alloy before irradiation, and it is concerned to disturb the magnetic measurement on irradiated material. Magnetic measurements were conducted in this work on type304 austenitic stainless steel specimens irradiated up to different doses. In addition, microstructure observation was conducted on the area including grain boundary to discuss the correlation of magnetization on irradiated austenitic stainless alloy and grain boundary cracking. Obtained magnetic data on irradiated type304 stainless steel were seen clearly different from that on un-irradiated specimen, and showed positive correlation with radiation dose, therefore it was thought that magnetic measurement technics can be applied for the material which contains certain quantity of ferrite phase before irradiation. In the microstructural observation, magnetic phase (FeNi$$_{3}$$) formation along the grain boundary was revealed.

Journal Articles

Current post irradiation examination techniques at the JMTR Hot laboratory

Shibata, Akira; Kato, Yoshiaki; Oishi, Makoto; Taguchi, Taketoshi; Ito, Masayasu; Yonekawa, Minoru; Kawamata, Kazuo

KAERI/GP-418/2015, p.151 - 165, 2015/05

The JMTR stopped its operation in 2006 for refurbishment. The reactor facilities have been refurbished from 2007. After refurbishment, JMTR Hot laboratory is expected to perform various post irradiation examinations. In this report, installations of experimental apparatuses and recent experimental method are introduced. (1) A nano-indenter with radius spherical indenter. Inverse analysis using FEM could presume material constants from load-depth curve of indentation. Mechanical properties of oxide layer of zirconium alloy and irradiated stainless steel will be analyzed. (2) Transmission Electron Microscope (TEM). TEM is capable of imaging at a significantly higher resolution than light microscopes or normal SEM. JAEA installed a TEM apparatus (JEOL JEM-2800) in JMTR Hot laboratory. The maximum magnification is 150,000,000 times. It can be operated from a remote location using a computer network. This contributes to the convenience of remote researchers and reducing the amount of exposure.

Journal Articles

Evaluation of selected grades of beryllium metal as reflector materials for extended lifetime performance

Dorn, C. K.*; Tsuchiya, Kunihiko; Takemoto, Noriyuki; Ito, Masayasu; Hori, Junichi*; Chekushina, L.*; Hatano, Yuji*; Chakrov, P.*; Kawamura, Hiroshi

Proceedings of 6th International Symposium on Material Testing Reactors (ISMTR-6) (Internet), 9 Pages, 2013/10

no abstracts in English

JAEA Reports

Conceptual design of multipurpose compact research reactor; Annual report FY2011

Watahiki, Shunsuke; Hanakawa, Hiroki; Imaizumi, Tomomi; Nagata, Hiroshi; Ide, Hiroshi; Komukai, Bunsaku; Kimura, Nobuaki; Miyauchi, Masaru; Ito, Masayasu; Nishikata, Kaori; et al.

JAEA-Technology 2013-021, 43 Pages, 2013/07

JAEA-Technology-2013-021.pdf:5.12MB

The number of research reactors in the world is decreasing because of their aging. On the other hand, the necessity of research reactor, which is used for human resources development, progress of the science and technology, industrial use and safety research is increasing for the countries which are planning to introduce the nuclear power plants. From above background, the Neutron Irradiation and Testing Reactor Center began to discuss a basic concept of Multipurpose Compact Research Reactor (MCRR) for education and training, etc., on 2010 to 2012. This activity is also expected to contribute to design tool improvement and human resource development in the center. In 2011, design study of reactor core, irradiation facilities with high versatility and practicality, and hot laboratory equipment for the production of Mo-99 was carried out. As the result of design study of reactor core, subcriticality and operation time of the reactor in consideration of an irradiation capsule, and about the transient response of the reactor to the reactivity disturbance during automatic control operation, it was possible to do automatic operation of MCRR, was confirmed. As the result of design study of irradiation facilities, it was confirmed that the implementation of an efficient mass production radioisotope Mo-99 can be expected. As the result of design study with hot laboratory facilities, Mo-99 production, RI export devised considered cell and facilities for exporting the specimens quickly was designed.

JAEA Reports

Preliminary accident analysis for a conceptual design of a 10 MW multi-purpose research reactor

Park, C.; Tanimoto, Masataka; Imaizumi, Tomomi; Miyauchi, Masaru; Ito, Masayasu; Kaminaga, Masanori

JAEA-Technology 2012-039, 87 Pages, 2013/01

JAEA-Technology-2012-039.pdf:3.55MB

Preliminary accident analysis has been carried out for a LOFA (Loss of Flow Accident) and RIAs (Reactivity Insertion Accidents) of the conceptual 10 MW MRR (multi-purpose research reactor) under design study by using the RELAP5/MOD3 code in order to provide the preliminary evaluation of safety margin as well as the intuitions to the design of the MRR. Input and modeling for the RELAP5/MOD3 simulations have also been described. The analysis results indicate that the concept of the MRR is feasible with practical safety margins. The same events have been also analyzed by using the PARET/ANL and the EUREKA-2/RR codes to compare the codes suitability, which have been widely used for the analysis of research reactors. Same geometric and modeling data used for the RELAP5/MOD3 have been used as long as they correspond to each code's input requirements. The three codes show the same or similar overall trends for the events analyzed, but show a small difference in a specific condition.

Journal Articles

Basic study on surface chemical combination between beryllium metal and hydrogen isotope gas, 2

Ito, Masayasu; Kitagishi, Shigeru; Hanawa, Yoshio; Tsuchiya, Kunihiko; Hatano, Yuji*; Matsuyama, Masao*; Nagasaka, Takuya*; Hishinuma, Yoshimitsu*

Annual Report of National Institute for Fusion Science; April 2011 - March 2012, P. 535, 2012/12

Beryllium has been utilized as a moderator and/or reflector in a number of material testing reactors. Beryllium is also supposed to be widely used in fusion reactors as neutron multiplier and protective walls of plasma facing components. It is important to perform the characterization of the different grade beryllium such as the productivity, mechanical and chemical properties and the interaction under water and/or gas environment. In this study, three kinds of beryllium (S-200F, S-65H, I-220H) were prepared, and corrosion test and surface analysis of these beryllium samples were carried out for life time expansion under pure water. As a result, the surface change of each Be sample was observed by the corrosion test and influenced by the content of BeO and the grain size.

Journal Articles

Neutron irradiation tests for beryllium material selection of neutron reflector in JMTR

Tsuchiya, Kunihiko; Ito, Masayasu; Kitagishi, Shigeru; Endo, Yasuichi; Saito, Takashi; Hanawa, Yoshio; Dorn, C. K.*

JAEA-Conf 2012-002, p.111 - 114, 2012/12

no abstracts in English

JAEA Reports

Research of flaw assessment method for beryllium reflector elements

Shibata, Akira; Ito, Masayasu; Takemoto, Noriyuki; Nakatsuka, Masafumi*; Ohara, Hiroshi*; Kodama, Mitsuhiro*; Tanimoto, Masataka; Tsuchiya, Kunihiko

JAEA-Technology 2011-034, 67 Pages, 2012/02

JAEA-Technology-2011-034.pdf:6.94MB

Reflector elements made from metal beryllium is widely used as neutron reflectors to increase neutron flux in test reactors. When beryllium reflector elements are irradiated by neutron, bending of reflector elements caused by swelling occurs, and beryllium reflector elements must be replaced in several years. In this report, investigation for non-destructive inspection method of metal Beryllium and experiments for Preliminary inspection to establish post irradiation examination method for research of characteristics of metal beryllium under neutron irradiation were reported.

JAEA Reports

Conceptual design of multipurpose compact research reactor; Annual report FY2010 (Joint research)

Imaizumi, Tomomi; Miyauchi, Masaru; Ito, Masayasu; Watahiki, Shunsuke; Nagata, Hiroshi; Hanakawa, Hiroki; Naka, Michihiro; Kawamata, Kazuo; Yamaura, Takayuki; Ide, Hiroshi; et al.

JAEA-Technology 2011-031, 123 Pages, 2012/01

JAEA-Technology-2011-031.pdf:16.08MB

The number of research reactors in the world is decreasing because of their aging. However, the planning to introduce the nuclear power plants is increasing in Asian countries. In these Asian countries, the key issue is the human resource development for operation and management of nuclear power plants after constructed them, and also the necessity of research reactor, which is used for lifetime extension of LWRs, progress of the science and technology, expansion of industry use, human resources training and so on, is increasing. From above backgrounds, the Neutron Irradiation and Testing Reactor Center began to discuss basic concept of a multipurpose low-power research reactor for education and training, etc. This design study is expected to contribute not only to design tool improvement and human resources development in the Neutron Irradiation and Testing Reactor Center but also to maintain and upgrade the technology on research reactors in nuclear power-related companies. This report treats the activities of the working group from July 2010 to June 2011 on the multipurpose low-power research reactor in the Neutron Irradiation and Testing Reactor Center and nuclear power-related companies.

Journal Articles

Basic study on surface chemical combination between beryllium metal and hydrogen isotope gas

Tsuchiya, Kunihiko; Kitagishi, Shigeru; Ito, Masayasu; Hanawa, Yoshio; Hatano, Yuji*; Matsuyama, Masao*; Nagasaka, Takuya*; Hishinuma, Yoshimitsu*

Annual Report of National Institute for Fusion Science; April 2010 - March 2011, P. 545, 2011/11

no abstracts in English

JAEA Reports

Neutron shielding reinforcement in the JMTR Hot Laboratory

Ito, Masayasu; Kawamata, Kazuo; Tayama, Yoshinobu; Kanazawa, Yoshiharu; Yonekawa, Minoru; Nakagawa, Tetsuya; Omi, Masao; Iwamatsu, Shigemi

JAEA-Technology 2011-022, 44 Pages, 2011/07

JAEA-Technology-2011-022.pdf:3.29MB

Hot laboratory are facilities that execute the post irradiation examination of sample irradiated in material testing reactors etc. The handling of high burn-up fuel is scheduled in the JMTR (Japan Materials Testing Reactor) Hot Laboratory with JMTR re-operate in FY 2011. This report describes evaluation, production and installation of shielding of the hot cells in the JMTR Hot Laboratory.

JAEA Reports

Investigation for methods of micro-structural observation of beryllium metals by TEM

Ito, Masayasu; Kawamata, Kazuo; Sozawa, Shizuo; Shibata, Akira; Tsuchiya, Kunihiko; Kitsunai, Yuji*; Kodama, Mitsuhiro*

JAEA-Testing 2011-003, 22 Pages, 2011/06

JAEA-Testing-2011-003.pdf:9.16MB

In JMTR, beryllium metal is used for neutron reflector. However, the periodical exchange of the neutron reflector is necessary due to degradation of strength and swelling under neutron irradiation. So it is required to select the material that bears long term from the viewpoint of the utilization rate improvement and the radioactive waste decrease in JMTR. It is important to evaluate the characteristics of beryllium metals precisely. This report describes the preparation method of the sample and observation results by the transmission electron microscope that is being examined as a evaluation method of the beryllium metal.

Journal Articles

Surface analysis for chemical combination of beryllium metals

Tsuchiya, Kunihiko; Hanawa, Yoshio; Kitagishi, Shigeru; Ito, Masayasu; Hatano, Yuji*; Matsuyama, Masao*

Heisei-21-Nendo Toyama Daigaku Kyodo Riyo, Kyodo Kenkyu Seika Hokokusho, p.9 - 10, 2010/12

no abstracts in English

JAEA Reports

Evaluation of characteristics of the surface displacement measurement device by laser method

Ito, Masayasu; Kawamata, Kazuo; Ishitsuka, Etsuo

JAEA-Testing 2009-007, 16 Pages, 2010/03

JAEA-Testing-2009-007.pdf:10.26MB

Surface state of material is measured by the surface displacement measurement device with laser displacement sensor. It is important to know the characteristic of a device that considers environment to use this device in the cell. Therefore, this report described about evaluation of characteristics of the device by laser method.

Journal Articles

Progress in physics and technology developments for the modification of JT-60

Tamai, Hiroshi; Matsukawa, Makoto; Kurita, Genichi; Hayashi, Nobuhiko; Urata, Kazuhiro*; Miura, Yushi; Kizu, Kaname; Tsuchiya, Katsuhiko; Morioka, Atsuhiko; Kudo, Yusuke; et al.

Plasma Science and Technology, 6(1), p.2141 - 2150, 2004/02

 Times Cited Count:2 Percentile:6.52(Physics, Fluids & Plasmas)

The dominant issue for the the modification program of JT-60 (JT-60SC) is to demonstrate the steady state reactor relevant plasma operation. Physics design on plasma parameters, operation scenarios, and the plasma control method are investigated for the achievement of high-$$beta$$. Engineering design and the R&D on the superconducting magnet coils, radiation shield, and vacuum vessel are performed. Recent progress in such physics and technology developments is presented.

Journal Articles

High performance tokamak experiments with a ferritic steel wall on JFT-2M

Tsuzuki, Kazuhiro; Kimura, Haruyuki; Kawashima, Hisato; Sato, Masayasu; Kamiya, Kensaku; Shinohara, Koji; Ogawa, Hiroaki; Hoshino, Katsumichi; Bakhtiari, M.; Kasai, Satoshi; et al.

Nuclear Fusion, 43(10), p.1288 - 1293, 2003/10

 Times Cited Count:39 Percentile:74.34(Physics, Fluids & Plasmas)

no abstracts in English

Journal Articles

Objectives and design of the JT-60 superconducting tokamak

Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Chujo, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.

Nuclear Fusion, 43(7), p.606 - 613, 2003/07

no abstracts in English

Journal Articles

Objectives and design of the JT-60 superconducting tokamak

Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Cho, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.

Nuclear Fusion, 43(7), p.606 - 613, 2003/07

 Times Cited Count:33 Percentile:69.18(Physics, Fluids & Plasmas)

no abstracts in English

35 (Records 1-20 displayed on this page)