Design and actual performance of J-PARC 3 GeV rapid cycling synchrotron for high-intensity operation

Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.

Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09

https://doi.org/10.1080/00223131.2022.2038301

In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.

First isolation and analysis of caesium-bearing microparticles from marine samples in the Pacific coastal area near Fukushima Prefecture

Miura, Hikaru*; Ishimaru, Takashi*; Ito, Yukari*; Kuribara, Yuichi; Otosaka, Shigeyoshi*; Sakaguchi, Aya*; Misumi, Kazuhiro*; Tsumune, Daisuke*; Kubo, Atsushi*; Higaki, Shogo*; et al.

Scientific Reports (Internet), 11, p.5664_1 - 5664_11, 2021/03

https://doi.org/10.1038/s41598-021-85085-w

For the first time, we isolated and investigated seven CsMPs (radioactive caesium-bearing microparticles) from marine particulate matter and sediment. From the elemental composition, the Cs/Cs activity ratio, and the Cs activity per unit volume results, we inferred that the five CsMPs collected from particulate matter were emitted from Unit 2 of the FDNPP, whereas the two CsMPs collected from marine sediment were possibly emitted from Unit 3. The presence of CsMPs can cause overestimation of the solid-water distribution coefficient of Cs in marine sediments and particulate matter and a high apparent radiocaesium concentration factor for marine biota. CsMPs emitted from Unit 2, which were collected from the estuary of a river that flowed through a highly contaminated area, may have been deposited on land and then transported by the river. By contrast, CsMPs emitted from Unit 3 were possibly transported eastward by the wind and deposited directly onto the ocean surface.

Observation of dynamics and modification of solid surface using a picosecond soft X-ray laser

Nishikino, Masaharu; Kawachi, Tetsuya; Hasegawa, Noboru; Ishino, Masahiko; Minami, Yasuo*; Suemoto, Toru*; Onishi, Naofumi*; Ito, Atsushi*; Sato, Katsutoshi*; Faenov, A.*; et al.

X-Ray Lasers and Coherent X-Ray Sources; Development and Applications XI (Proceedings of SPIE, Vol.9589), p.958902_1 - 958902_7, 2015/09

Observation of the dependence on the fluence and materials in femto-second laser ablation process by using the soft X-ray laser probe

Hasegawa, Noboru; Tomita, Takuro*; Nishikino, Masaharu; Eyama, Tsuyoshi*; Kakimoto, Naoya*; Minami, Yasuo*; Baba, Motoyoshi*; Onishi, Naofumi*; Ito, Atsushi*; Kawachi, Tetsuya; et al.

JAEA-Conf 2015-001, p.17 - 20, 2015/07

https://jopss.jaea.go.jp/pdfdata/JAEA-Conf-2015-001.pdf#page=27

We have succeeded in simultaneous observation of the ablation front and the expansion front with thin filmy structure in the femto-second laser ablation process of a gold target by using the 13.9 nm soft X-ray probe (incident angle to the sample 70 deg) with soft X-ray interferometer. The dependence on the laser local fluence and materials was obtained by the comparison between gold and tungsten.

Clinical significance of L-type amino acid transporter 1 expression as a prognostic marker and potential of new targeting therapy in biliary tract cancer

Kaira, Kyoichi*; Sunose, Yutaka*; Ohshima, Yasuhiro; Ishioka, Noriko; Arakawa, Kazuhisa*; Ogawa, Tetsushi*; Sunaga, Noriaki*; Shimizu, Kimihiro*; Tominaga, Hideyuki*; Oriuchi, Noboru*; et al.

BMC Cancer, 13, p.482_1 - 482_12, 2013/10

https://doi.org/10.1186/1471-2407-13-482

In-vessel tritium

Ueda, Yoshio*; Oya, Kaoru*; Ashikawa, Naoko*; Ito, Atsushi*; Ono, Tadayoshi*; Kato, Daiji*; Kawashima, Hisato; Kawamura, Gakushi*; Kenmotsu, Takahiro*; Saito, Seiki*; et al.

Purazuma, Kaku Yugo Gakkai-Shi, 88(9), p.484 - 502, 2012/09

http://ci.nii.ac.jp/naid/110009518478

no abstracts in English

Tritium science and technology for fusion reactor, 3; Theory and code development for evaluation of tritium retention and exhaust in fusion reactor

Oya, Kaoru*; Inai, Kensuke*; Shimizu, Katsuhiro; Takizuka, Tomonori; Kawashima, Hisato; Hoshino, Kazuo; Hatayama, Akiyoshi*; Toma, Mitsunori*; Tomita, Yukihiro*; Kawamura, Gakushi*; et al.

Purazuma, Kaku Yugo Gakkai-Shi, 85(10), p.695 - 703, 2009/10

https://ci.nii.ac.jp/naid/110007468381

no abstracts in English

Current status of the control system for J-PARC accelerator complex

Yoshikawa, Hiroshi; Sakaki, Hironao; Sako, Hiroyuki; Takahashi, Hiroki; Shen, G.; Kato, Yuko; Ito, Yuichi; Ikeda, Hiroshi*; Ishiyama, Tatsuya*; Tsuchiya, Hitoshi*; et al.

Proceedings of International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS '07) (CD-ROM), p.62 - 64, 2007/10

J-PARC is a large scale facility of the proton accelerators for the multi-purpose of scientific researches in Japan. This facility consists of three accelerators and three experimental stations. Now, J-PARC is under construction, and LINAC is operated for one year, 3GeV synchrotron has just started the commissioning in this October the 1st. The completion of this facility will be next summer. The control system of accelerators established fundamental performance for the initial commissioning. The most important requirement to the control system of this facility is to minimize the activation of accelerator devices. In this paper, we show that the performances of each layer of this control system have been achieved in the initial stage.

Overview of the national centralized tokamak programme

Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.

Nuclear Fusion, 46(3), p.S29 - S38, 2006/03

https://doi.org/10.1088/0029-5515/46/3/S05

The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.

Design study of national centralized tokamak facility for the demonstration of steady state high- plasma operation

Tamai, Hiroshi; Akiba, Masato; Azechi, Hiroshi*; Fujita, Takaaki; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; Hosogane, Nobuyuki; Ichimura, Makoto*; et al.

Nuclear Fusion, 45(12), p.1676 - 1683, 2005/12

https://doi.org/10.1088/0029-5515/45/12/023

Design studies are shown on the National Centralized Tokamak facility. The machine design is carried out to investigate the capability for the flexibility in aspect ratio and shape controllability for the demonstration of the high-beta steady state operation with nation-wide collaboration, in parallel with ITER towards DEMO. Two designs are proposed and assessed with respect to the physics requirements such as confinement, stability, current drive, divertor, and energetic particle confinement. The operation range in the aspect ratio and the plasma shape is widely enhanced in consistent with the sufficient divertor pumping. Evaluations of the plasma performance towards the determination of machine design are presented.