MAAP code analysis for the in-vessel phase of Fukushima-Daiichi Nuclear Power Station Unit 1 and comparison of the results among Units 1 to 3

Sato, Ikken; Yoshikawa, Shinji; Yamashita, Takuya; Shimomura, Kenta; Cibula, M.*; Mizokami, Shinya*

Nuclear Engineering and Design, 422, p.113088_1 - 113088_24, 2024/06

https://doi.org/10.1016/j.nucengdes.2024.113088

Impact of the Ce states in the electronic structure of the intermediate-valence superconductor CeIr

Fujimori, Shinichi; Kawasaki, Ikuto; Takeda, Yukiharu; Yamagami, Hiroshi; Sasabe, Norimasa*; Sato, Yoshiki*; Shimizu, Yusei*; Nakamura, Ai*; Maruya, A.*; Homma, Yoshiya*; et al.

Electronic Structure (Internet), 5(4), p.045009_1 - 045009_7, 2023/11

https://doi.org/10.1088/2516-1075/ad0a3d

SUMRAY: R and Python codes for calculating cancer risk due to radiation exposure of a population

Sasaki, Michiya*; Furukawa, Kyoji*; Satoh, Daiki; Shimada, Kazumasa; Kudo, Shinichi*; Takagi, Shunji*; Takahara, Shogo; Kai, Michiaki*

Journal of Radiation Protection and Research, 48(2), p.90 - 99, 2023/06

https://doi.org/10.14407/jrpr.2022.00213

This paper reports on the calculation code that is the result of the activities of the "Task Group for Development of Cancer Risk Estimation Codes Associated with Radiation Exposure (FY2020-2021)" established by the Japan Health Physics Society. In order to promote research on the estimation of cancer risk associated with radiation exposure, the Task Group decided to disclose the source code, including the algorithm and parameters used in the calculations, and to release the code under a license that permits modification and redistribution of the code. The computational code was named SUMRAY and coded in two computer languages, that is R and Python. The code is capable of calculating the accumulated excess risk using Monte Carlo methods with a 95% confidence interval. The results of SUMRAY were compared with the results of the existing codes whose source code is not publicly available, under the same calculation conditions. From the results, it was found that they were in reasonable agreement within the confidence interval. It is expected that SUMRAY, an open-source software, will be used as a common basis for cancer risk estimation studies associated with radiation exposure.

Measurement of double-differential neutron yields for iron, lead, and bismuth induced by 107-MeV protons for research and development of accelerator-driven systems

Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta*; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.

EPJ Web of Conferences, 284, p.01023_1 - 01023_4, 2023/05

https://doi.org/10.1051/epjconf/202328401023

For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron, lead, and bismuth have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics. The measured TTNYs and DDXs were compared with calculations by the Monte Carlo transport code PHITS with its default physics model of INCL version 4.6 combined with GEM and those with the JENDL-4.0/HE nuclear data library.

MAAP code analysis focusing on the fuel debris condition in the lower head of the pressure vessel in Fukushima-Daiichi Nuclear Power Station Unit 2

Sato, Ikken; Yoshikawa, Shinji; Yamashita, Takuya; Cibula, M.*; Mizokami, Shinya*

Nuclear Engineering and Design, 404, p.112205_1 - 112205_21, 2023/04

https://doi.org/10.1016/j.nucengdes.2023.112205

Based on updated knowledge from plant-internal investigations, experiments and model simulations until now, the in-vessel phase of Fukushima-Daiichi Nuclear Power Station Unit 2 was analyzed using the MAAP code. In Unit 2, it is considered that the core material enthalpy was relatively low when it relocated to the lower plenum of the pressure vessel, then, cooled by the coolant and solidified there. Although the MAAP code tended to underestimate the degree of core-material oxidation during the relocation, this probable underestimation was compensated for by an existing study that was considered more reliable, so that more realistic debris conditions in the lower plenum could be obtained. Basic validity of the former prediction of the Unit 2 accident progression behavior was confirmed and detailed boundary condition for the later phase was provided. This boundary condition should be utilized for future studies addressing debris reheating process leading to lower head failure and debris relocation toward the pedestal.

Measurement of 107-MeV proton-induced double-differential neutron yields for iron for research and development of accelerator-driven systems

Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; Yashima, Hiroshi*; Nishio, Katsuhisa; et al.

JAEA-Conf 2022-001, p.129 - 133, 2022/11

https://doi.org/10.11484/jaea-conf-2022-001

For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors composed of the NE213 liquid organic scintillators and photomultiplier tubes, which were connected to a multi-channel digitizer mounted with a field-programmable gate array (FPGA), for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination applying the gate integration method to the FPGA. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics.

LIVE-J1 experiment on debris melting behavior toward understanding late in-vessel accident progression of the Fukushima Daiichi Nuclear Power Station

Madokoro, Hiroshi; Yamashita, Takuya; Sato, Ikken; Gaus-Liu, X.*; Cron, T.*; Fluhrer, B.*; Stngle, R.*; Wenz, T.*; Vervoortz, M.*; Mizokami, Shinya

Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 16 Pages, 2022/03

Stabilization treatment of Pu-bearing organic materials

Morishita, Kazuki; Sato, Takumi; Onishi, Takashi; Seki, Takayuki*; Sekine, Shinichi*; Okitsu, Yuichi*

JAEA-Technology 2021-024, 27 Pages, 2021/10

JAEA-Technology-2021-024.pdf:2.41MB

In the case of Plutonium (Pu)-bearing organic materials, organic materials are decomposed by alpha rays emitted mainly from Pu to generate hydrogen gas and other substances. Therefore, to safely store Pu-bearing organic materials for an extended period of time, organic materials must be eliminated. In addition, carbide and nitride fuels must be converted into oxides for safe storage in order to prevent the exothermal reaction of these fuels with oxygen/moisture in air. A survey of the literature on the stabilization treatment of Pu-bearing organic materials confirmed that organic materials can be decomposed and removed by heating at 950 C (1223.15 K) or greater in air. Furthermore, based on the calculated thermodynamic parameters of oxidation reaction of carbide and nitride fuels in air, it was estimated that these fuels would be oxidized in air at 950 C because the equilibrium oxygen partial pressure in the oxidation reaction at 950 C was lower than 2.110 Pa (oxygen partial pressure in air). Therefore, it was decided to stabilize Pu-bearing organic materials by heating at 950 C in air to remove the organic materials and oxidize the carbide and nitride fuels. As a mock-up test to remove the organic materials, thin sheets of epoxy resin were heated in air. The changes in appearance and weight before and after heating in air showed that organic materials can be removed. After the mock-up test, Pu-bearing organic materials were also stabilized by heating in the similar condition.

Time evolution calculation of muon catalysed fusion; Emission of recycling muons from a two-layer hydrogen film

Yamashita, Takuma*; Okutsu, Kenichi*; Kino, Yasushi*; Nakashima, Ryota*; Miyashita, Konan*; Yasuda, Kazuhiro*; Okada, Shinji*; Sato, Motoyasu*; Oka, Toshitaka; Kawamura, Naritoshi*; et al.

Fusion Engineering and Design, 169, p.112580_1 - 112580_5, 2021/08

https://doi.org/10.1016/j.fusengdes.2021.112580

A muon () having 207 times larger mass of electron and the same charge as the electron has been known to catalyze a nuclear fusion between deuteron (d) and triton (t). These two nuclei are bound by and form a muonic hydrogen molecular ion, dt. Due to the short inter-nuclear distance of dt, the nuclear fusion, d +t + n + 17.6 MeV, occurs inside the molecule. This reaction is called muon catalyzed fusion (CF). Recently, the interest on CF is renewed from the viewpoint of applications, such as a source of high-resolution muon beam and mono-energetic neutron beam. In this work, we report a time evolution calculation of CF in a two-layered hydrogen isotope target.

High temperature gas-cooled reactors

Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.

High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02

https://doi.org/10.1016/C2018-0-05383-9

As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.