Microstructural evolution of intermetallic phase precipitates in Cr-coated zirconium alloy cladding in high-temperature steam oxidation up to 1400C

Mohamad, A. B.; Nemoto, Yoshiyuki; Furumoto, Kenichiro*; Okada, Yuji*; Sato, Daiki*

Corrosion Science, 224, p.111540_1 - 111540_15, 2023/11

https://doi.org/10.1016/j.corsci.2023.111540

Intruder configurations in Ne at the transition into the island of inversion; Detailed structure study of Ne

Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.

Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08

https://doi.org/10.1016/j.physletb.2023.138038

Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.

Design and actual performance of J-PARC 3 GeV rapid cycling synchrotron for high-intensity operation

Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.

Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09

https://doi.org/10.1080/00223131.2022.2038301

In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.

Oxidation of silicon carbide in steam studied by laser heating

Pham, V. H.; Nagae, Yuji; Kurata, Masaki; Furumoto, Kenichiro*; Sato, Hisaki*; Ishibashi, Ryo*; Yamashita, Shinichiro

Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.670 - 674, 2019/09

Network system operation for J-PARC accelerators

Kamikubota, Norihiko*; Yamada, Shuei*; Sato, Kenichiro*; Kikuzawa, Nobuhiro; Yamamoto, Noboru*; Yoshida, Susumu*; Nemoto, Hiroyuki*

Proceedings of 16th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2017) (Internet), p.1470 - 1473, 2018/01

https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA047

no abstracts in English

Study on the seismic buckling evaluation method for Mod. 9Cr-1Mo steel cylindrical vessel

Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Kubo, Koji*; Sato, Kenichiro*; Wakai, Takashi; Shimomura, Kenta

Nihon Kikai Gakkai M&M 2017 Zairyo Rikigaku Kanfarensu Koen Rombunshu (Internet), p.591 - 595, 2017/10

no abstracts in English

Radiochemical analysis of rubble collected from Fukushima Daiichi Nuclear Power Station

Sato, Yoshiyuki; Tanaka, Kiwamu; Ueno, Takashi; Ishimori, Kenichiro; Kameo, Yutaka

Hoken Butsuri, 51(4), p.209 - 217, 2016/12

https://doi.org/10.5453/jhps.51.209

A large amount of contaminated rubbles were generated by the accident at the Fukushima Daiichi Nuclear Power Station (F1NPS). For safe decommissioning of F1NPS, it is important to evaluate the composition and concentration of radionuclides in the rubbles. In this paper, to characterize the rubbles collected at F1NPS in Unit-1, Unit-2 and Unit-3, radiochemical analysis was operated. As a result of radiochemical analysis, -ray-emitting nuclides Co, Cs and Eu, -ray-emitting nuclides H, C, Sr and Tc, and -particle-emitting nuclides Pu, Am and Cm were detected. In contrast, Nb and Eu concentrations were below the detection limit. Measured radioactive concentrations implied that H, C, Co and Sr concentrations depended on Cs concentration respectively. This analysis was characterized the radioactivity concentrations of the rubbles.

Strength of 316FR joints welded by Type 316FR/16-8-2 filler metals

Yamashita, Takuya; Nagae, Yuji; Sato, Kenichiro*; Yamamoto, Kenji*

Journal of Pressure Vessel Technology, 138(2), p.024501_1 - 024501_7, 2016/04

https://doi.org/10.1115/1.4031444

J-integral evaluation method for a through wall crack in thin-walled large diameter pipes made of Mod.9Cr-1Mo steel

Wakai, Takashi; Machida, Hideo*; Arakawa, Manabu*; Sato, Kenichiro*

Nihon Kikai Gakkai 2015-Nendo Nenji Taikai Koen Rombunshu (DVD-ROM), 5 Pages, 2015/09

http://ci.nii.ac.jp/naid/110010048265

This paper describes a J-integral evaluation procedure applicable to unstable failure analysis for a circumferential through wall crack in a pipe. Japan Sodium cooled Fast Reactor (JSFR) pipes are made of Mod.9Cr-1Mo steel. The fracture toughness of the material is inferior to that of conventional austenitic stainless steels. In addition, JSFR pipe has small thickness and large diameter and displacement controlled load is predominant. Therefore, the load balance in such piping system changes by crack extension and 2 parameter method using J-integral is applicable to unstable failure analysis for the pipes under such conditions. As a J-integral evaluation method for circumferential through wall crack in a cylinder, EPRI has proposed a fully plastic solution method. However, the geometry of JSFR pipe and material characteristics of Mod.9Cr-1Mo steel exceed the applicable range of EPRI's method. Therefore, a series of elastic, elastoplastic and plastic finite element analyses (FEA) were performed for a pipe with a circumferential through-wall crack to establish a J-integral evaluation method applicable to such conditions. J-integrals obtained from the FEA were resolved into elastic, local plastic and fully plastic components. Each component was expressed as a function of analytical parameter, such as pipe geometries, crack size, material characteristics and so on. As a result, a simplified J-integral evaluation method was proposed.

Creep-fatigue tests of double-end notched bar made of Mod.9Cr-1Mo steel

Shimomura, Kenta; Kato, Shoichi; Wakai, Takashi; Ando, Masanori; Hirose, Yuichi*; Sato, Kenichiro*

Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 9 Pages, 2015/05

This paper describes experimental and analytical works to confirm that the design standard for SFR components sufficiently covers possible failure mechanisms. Creep-fatigue damage evaluation method in JSME design standard for SFR components has been constructed based on experiments and/or numerical analyses of conventional austenitic stainless steels, such as 304SS. Since the material characteristics of Mod.9Cr-1Mo steel are substantially different from those of austenitic stainless steels, it is required to verify the applicability of the design standards to the SFR components made of Mod.9Cr-1Mo steel. A series of uni-axial creep-fatigue tests were conducted using double-ended notch bar specimens made of Mod.9Cr-1Mo steel under displacement controlled condition with 30 minute holding. The curvature radii of the specimens were 1.6mm, 11.2mm and 40.0mm. The specimen having 1.6mm notch and 11.2mm notch failed from outer surface but the specimen having 40.0mm notch showed obvious internal crack nucleation. In addition, though total duration time of the creep-fatigue test was only 2,000 hours, a lot of creep voids and inter granular crack growth were observed. To clarify the cause of such peculiar failure, some additional experiments were performed, as well as some numerical analyses. We could point out that such a peculiar failure aspect might result from corresponding stress distribution in the cross section. As a result of a series of investigations, possible causes of such peculiar failure could be narrowed down. A future investigation plan was proposed to clarify the most significant cause.