Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
CMohamad, A. B.; Nemoto, Yoshiyuki; Furumoto, Kenichiro*; Okada, Yuji*; Sato, Daiki*
Corrosion Science, 224, p.111540_1 - 111540_15, 2023/11
Times Cited Count：0 Percentile：0(Materials Science, Multidisciplinary)Nagai, Haruyasu; Furuta, Yoshihiro*; Nakayama, Hiromasa; Satoh, Daiki
Journal of Nuclear Science and Technology, 60(11), p.1345 - 1360, 2023/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)A novel monitoring method for the quantitative visualization of 3D distribution of a radioactive plume and source term estimation of released radionuclides is proposed and its feasibility is demonstrated by preliminary test. The proposed method is the combination of gamma-ray imaging spectroscopy with the Electron Tracking Compton Camera (ETCC) and real-time high-resolution atmospheric dispersion simulation based on 3D wind observation with Doppler lidar. The 3D distribution of a specific radionuclide in a target radioactive plume is inversely reconstructed from line gamma-ray images from each radionuclide by several ETCCs located around the target by harmonizing with the air concentration distribution pattern of the plume predicted by real-time atmospheric dispersion simulation. A prototype of the analysis method was developed, showing a sufficient performance in several test cases using hypothetical data generated by numerical simulations of atmospheric dispersion and radiation transport.
Pb and 
Bi in proton-induced reactions near 100 MeVIwamoto, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Yashima, Hiroshi*; Nishio, Katsuhisa; Sugihara, Kenta*; 
elik, Y.*; et al.
Nuclear Instruments and Methods in Physics Research B, 544, p.165107_1 - 165107_15, 2023/11
Times Cited Count：0 Percentile：0.02(Instruments & Instrumentation)The lack of double-differential cross-section (DDX) data for neutron production below the incident proton energy of 200 MeV hinders the validation of spallation models in technical applications, such as research and development of accelerator-driven systems (ADSs). The present study aims to obtain experimental DDX data for ADS spallation target materials in this energy region and identify issues related to the spallation models by comparing them with the analytical predictions. The DDXs for the (
) reactions of Pb and Bi in the 100-MeV region were measured over an angular range of 30 to 150 using the time-of-flight method. The measurements were conducted at Kyoto University utilizing the FFAG accelerator. The DDXs obtained were compared with calculation results from Monte Carlo-based spallation models and the evaluated nuclear data library, JENDL-5. Comparison between the measured DDX and analytical values based on the spallation models and evaluated nuclear data library indicated that, in general, the CEM03.03 model demonstrated the closest match to the experimental values. Additionally, the comparison highlighted several issues that need to be addressed in order to improve the reproducibility of the proton-induced neutron-production DDX in the 100 MeV region by these spallation models and evaluated nuclear data library.
Nakayama, Hiromasa; Satoh, Daiki
Nihon Genshiryoku Gakkai-Shi ATOMO
, 65(10), p.621 - 624, 2023/10
We developed a local-scale high-resolution atmospheric dispersion and dose assessment system (LHADDAS) for safety and consequence assessment of nuclear facilities and emergency response to nuclear accidents or deliberate releases of radioactive materials in built-up urban areas. This system comprises three parts: preprocessing of input files, and main calculation by a local-scale high-resolution atmospheric dispersion model using large-eddy simulation (LOHDIM-LES) and a real-time urban dispersion simulation model based on a lattice Boltzmann method (CityLBM), and postprocessing of dose calculation by a simulation code powered by lattice dose-response functions (SIBYL). We introduce front line of countermeasures against radiation terrorism in urban area as an example.
Sasaki, Michiya*; Furukawa, Kyoji*; Satoh, Daiki; Shimada, Kazumasa; Kudo, Shinichi*; Takagi, Shunji*; Takahara, Shogo; Kai, Michiaki*
Journal of Radiation Protection and Research, 48(2), p.90 - 99, 2023/06
This paper reports on the calculation code that is the result of the activities of the "Task Group for Development of Cancer Risk Estimation Codes Associated with Radiation Exposure (FY2020-2021)" established by the Japan Health Physics Society. In order to promote research on the estimation of cancer risk associated with radiation exposure, the Task Group decided to disclose the source code, including the algorithm and parameters used in the calculations, and to release the code under a license that permits modification and redistribution of the code. The computational code was named SUMRAY and coded in two computer languages, that is R and Python. The code is capable of calculating the accumulated excess risk using Monte Carlo methods with a 95% confidence interval. The results of SUMRAY were compared with the results of the existing codes whose source code is not publicly available, under the same calculation conditions. From the results, it was found that they were in reasonable agreement within the confidence interval. It is expected that SUMRAY, an open-source software, will be used as a common basis for cancer risk estimation studies associated with radiation exposure.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta*; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
EPJ Web of Conferences, 284, p.01023_1 - 01023_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron, lead, and bismuth have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics. The measured TTNYs and DDXs were compared with calculations by the Monte Carlo transport code PHITS with its default physics model of INCL version 4.6 combined with GEM and those with the JENDL-4.0/HE nuclear data library.
Watanabe, Yukinobu*; Sadamatsu, Hiroki*; Araki, Shohei; Nakano, Keita; Kawase, Shoichiro*; Kin, Tadahiro*; Iwamoto, Yosuke; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; et al.
EPJ Web of Conferences, 284, p.01041_1 - 01041_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)Intensive fast neutron sources using deuteron accelerators have been proposed for the study of medical RI production, radiation damage for fusion reactor materials, nuclear transmutation of radioactive waste, and so on. Neutron production data from various materials bombarded by deuterons are required for the design of such neutron sources. In the present work, we have conducted a systematic measurement of double-differential neutron production cross sections (DDXs) for a wide atomic number range of targets (Li, Be, C, Al, Cu, Nb, In, Ta, and Au) at an incident energy of 200 MeV in the Research Center for Nuclear Physics (RCNP), Osaka University. A deuteron beam accelerated to 200 MeV was transported to the neutron experimental hall and focused on a thin target foil. Emitted neutrons from the target were detected by two different-size EJ301 liquid organic scintillators located at two distances of 7 m and 20 m, respectively. The neutron DDXs were measured at six angles from 0 to 25). The neutron energy was determined by a conventional time-of-flight (TOF) method. The measured DDXs were compared with theoretical model calculations by the DEUteron-induced Reaction Analysis Code System (DEURACS) and PHITS. The result indicated that the DEURACS calculation provides better agreement with the measured DDXs than the PHITS calculation.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
Journal of Nuclear Science and Technology, 60(4), p.435 - 449, 2023/04
Times Cited Count：3 Percentile：68.71(Nuclear Science & Technology)Double-differential thick target neutron yields (TTNYs) for Fe, Pb, and Bi targets induced by 107-MeV protons were measured using the fixed-field alternating gradient accelerator at Kyoto University for research and development of accelerator-driven systems (ADSs) and fundamental ADS reactor physics research at the Kyoto University Critical Assembly (KUCA). Note that TTNYs were obtained with the time-of-flight method using a neutron detector system comprising eight neutron detectors; each detector has a small NE213 liquid organic scintillator and photomultiplier tube. The TTNYs obtained were compared with calculation results using Monte Carlo-based spallation models (i.e., INCL4.6/GEM, Bertini/GEM, JQMD/GEM, and JQMD/SMM/GEM) and the evaluated high-energy nuclear data library, i.e., JENDL-4.0/HE, implemented in the particle and heavy iontransport code system (PHITS). All models, including JENDL-4.0/HE, failed to predict high-energy peaks at a detector angle of 5. Comparing the energy- and angle-integrated spallation neutron yields at energies of 
20 MeV estimated using the measured TTNYs and the PHITS indicated that INCL4.6/GEM would be suitable for the Monte Carlo transport simulation of ADS reactor physics experiments at the KUCA.
Futagawa, Kazuo; Kashimura, Keita; Sato, Daiki*; Kawasaki, Masatsugu
JAEA-Data/Code 2022-011, 75 Pages, 2023/03
JAEA-Data-Code-2022-011.pdf:1.49MB
These statistical results are based on the meteorological data observed at the Nuclear Science Research Institute in Japan Atomic Energy Agency and statistically processed according to "The guideline of meteorological statistics for the safety analysis of nuclear power reactor" (Nuclear Safety Commission on January 28, 1982; revised on March 29, 2001). The statistics are based on 5 years of meteorological data, from January 2017 to December 2021. These are statistical results of wind direction, wind speed, atmospheric stability, etc., which are used for dose assessment of the general public due to radioactive materials discharged into the atmosphere from nuclear reactor facilities.
Nakayama, Hiromasa; Onodera, Naoyuki; Satoh, Daiki
Isotope News, (785), p.20 - 23, 2023/02
We developed the local-scale high-resolution atmospheric dispersion and dose assessment system (LHADDAS) for safety and consequence assessment of nuclear facilities and emergency response to nuclear accidents or deliberate releases of radioactive materials in built-up urban areas. This system comprises three parts, namely, preprocessing of input files, main calculation by a local-scale high-resolution atmospheric dispersion model using large-eddy simulation (LOHDIM-LES) or a real-time urban dispersion simulation model based on a lattice Boltzmann method (CityLBM), and postprocessing of dose calculation by a simulation code powered by lattice dose-response functions (SIBYL). LHADDAS has a broad utility and performs excellently in (1) simulating turbulent flows, plume dispersion, and dry deposition under realistic meteorological conditions; (2) simulating real-time tracer dispersion using a locally mesh-refined lattice Boltzmann method; and (3) estimating the air dose rates of radionuclides from air concentrations and surface deposition in consideration of the influence of individual buildings and structures. This system is promising for use in safety assessment of nuclear facilities (as an alternative to wind tunnel experiments), detailed pre/post-analyses of local-scale radioactive plume dispersion in case of nuclear accidents, and quick response to emergency situations resulting from deliberate release of radioactive materials by terrorist attacks in central urban district areas.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke; Abe, Yutaka*; Tsubakihara, Kosuke*; Okumura, Shin*; Ishizuka, Chikako*; Yoshida, Tadashi*; et al.
Journal of Nuclear Science and Technology, 60(1), p.1 - 60, 2023/01
Times Cited Count：64 Percentile：99.99(Nuclear Science & Technology)Di Palma, A.; Adamo, P.*; Dohi, Terumi; Fujiwara, Kenso; Hagiwara, Hiroki; Kitamura, Akihiro; Sakoda, Akihiro; Sato, Kazuhiko; Iijima, Kazuki
Chemosphere, 308, Part 1, p.136179_1 - 136179_13, 2022/12
Times Cited Count：1 Percentile：14.8(Environmental Sciences)The present study shows the use of mosses transplanted in bags, called as moss bags, as biosensors of airborne radioactive dusts in the environment of the evacuated zone of Fukushima. A standardized protocol was applied and three moss species were used. Background sites of Okayama Prefecture were used for comparison. In the Fukushima area, the moss bags were able to accumulate radiocaesium in all exposure sites and periods, with Sphagnum palustre moss acting as the most performant moss. The radiocaesium activity concentrations dectected in mosses were in strong agreement with the Cs deposition levels and decontamination status of each exposure site. The accumulation of soil-derived radiocaesium by moss bags was supported by autoradiography and electron microscopy analyses. The linear dependency of Cs accumulation with the exposure time allowed a radiocaesium quantitative assessment.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; Yashima, Hiroshi*; Nishio, Katsuhisa; et al.
JAEA-Conf 2022-001, p.129 - 133, 2022/11
For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors composed of the NE213 liquid organic scintillators and photomultiplier tubes, which were connected to a multi-channel digitizer mounted with a field-programmable gate array (FPGA), for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination applying the gate integration method to the FPGA. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics.
Nakayama, Hiromasa; Onodera, Naoyuki; Satoh, Daiki; Nagai, Haruyasu; Hasegawa, Yuta; Idomura, Yasuhiro
Journal of Nuclear Science and Technology, 59(10), p.1314 - 1329, 2022/10
Times Cited Count：5 Percentile：84.97(Nuclear Science & Technology)We developed a local-scale high-resolution atmospheric dispersion and dose assessment system (LHADDAS) for safety and consequence assessment of nuclear facilities and emergency response to nuclear accidents or deliberate releases of radioactive materials in built-up urban areas. This system is composed of pre-processing of input files, main calculation by local-scale high-resolution atmospheric dispersion model using large-eddy simulation (LOHDIM-LES) and real-time urban dispersion simulation model based on a lattice Boltzmann method (CityLBM), and post-processing of dose-calculation by simulation code powered by lattice dose-response functions (SIBYL). LHADDAS has a broad utility and offers superior performance in (1) simulating turbulent flows, plume dispersion, and dry deposition under realistic meteorological conditions, (2) performing real-time tracer dispersion simulations using a locally mesh-refined lattice Boltzmann method, and (3) estimating air dose rates of radionuclides from air concentrations and surface deposition in consideration of the influence of individual buildings and structures. This system is promising for safety assessment of nuclear facilities as an alternative to wind tunnel experiments, detailed pre/post-analyses of a local-scale radioactive plume dispersion in case of nuclear accidents, and quick response to emergency situations resulting from deliberate release of radioactive materials by a terrorist attack in an urban central district area.
Satoh, Daiki; Sato, Tatsuhiko
Journal of Nuclear Science and Technology, 59(8), p.1047 - 1060, 2022/08
Times Cited Count：5 Percentile：84.97(Nuclear Science & Technology)In this research, we simulated the neutron-response functions and detection efficiencies of a liquid organic scintillator using the particle and heavy-ion transport code system (PHITS). We incorporated the algorithm and database of the neutron-response simulation code SCINFUL-QMD into PHITS. Then, we updated the total, elastic, and inelastic cross-section data of the hydrogen and carbon nuclei for neutrons and developed a new scorer to analyze the light outputs from a scintillator. The calculation results of the neutron-response functions and the detection efficiencies were compared with results of SCINFUL-QMD, the previous PHITS with the new scorer, and the reported measurements. It was found that the improved PHITS successfully reproduced the results calculated by SCINFUL-QMD, except for around 150 MeV where a discontinuity of detection-efficiency curve was observed in the SCINFUL-QMD values. Our results showed better agreement with the measured data than the results of the previous PHITS. The uncertainties of the detection efficiencies calculated by PHITS using the present extensions were estimated to be approximately 15% for neutrons in the energy region below 100 MeV.
Komatsu, Yuya*; Shimizu, Ryota*; Sato, Ryuhei*; Wilde, M.*; Nishio, Kazunori*; Katase, Takayoshi*; Matsumura, Daiju; Saito, Hiroyuki*; Miyauchi, Masahiro*; Adelman, J. R.*; et al.
Chemistry of Materials, 34(8), p.3616 - 3623, 2022/04
Times Cited Count：9 Percentile：75.5(Chemistry, Physical)Uehara, Akihiro*; Shuhui, X.*; Sato, Ryotaro*; Matsumura, Daiju; Tsuji, Takuya; Yakumaru, Haruko*; Shiro, Ayumi*; Saito, Hiroyuki*; Tanaka, Izumi*; Ishihara, Hiroshi*; et al.
Advances in X-Ray Chemical Analysis, Japan, 53, p.223 - 229, 2022/03
no abstracts in English
Nakayama, Hiromasa; Satoh, Daiki; Nagai, Haruyasu; Terada, Hiroaki
Journal of Nuclear Science and Technology, 58(9), p.949 - 969, 2021/09
Times Cited Count：7 Percentile：77.21(Nuclear Science & Technology)We introduced a detailed dose calculation method considering building shielding effects into LOcal-scale High-resolution atmospheric DIspersion Model using LES (LOHDIM-LES). To estimate quickly and accurately dose distributions considering shielding effects of buildings, we employed the calculation method using dose-response matrices which were evaluated by photon transport simulations with Particle and Heavy-Ion Transport code System (PHITS). Compared to the air dose rate data obtained from monitoring posts in an actual nuclear facility, it was shown that the calculated dose rate is reasonably simulated well. It is concluded that LOHDIM-LES equipped with the calculation method using dose-response matrices can reasonably estimate the air dose rates considering shielding effects of individual buildings and structures.
Iwamoto, Yosuke; Yoshida, Makoto*; Matsuda, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Yashima, Hiroshi*; Yabuuchi, Atsushi*; Shima, Tatsushi*
Materials Science Forum, 1024, p.95 - 101, 2021/03
To predict the lifetime of target materials in high-energy radiation environments at spallation neutron sources, radiation transport codes such as PHITS are used to calculate the displacements per atom (DPA) value. In this work, to validate calculated DPA values of tungsten, we implemented 0.25-mm-diameter wire sample of tungsten in a proton irradiation device with a Gifford-McMahon cryocooler and measured the defect-induced electrical resistivity changes related to the displacement cross section using 389-MeV protons at 10 K. As well as our previous results for aluminum and copper, calculated results with defect production efficiencies provided good agreements with experimental data. Based on measurements of recovery of the defects through annealing, about 85% of the damage remained at 60 K, and the same tendency is observed in other experimental result for reactor neutron irradiation.
Petoussi-Henss, N.*; Satoh, Daiki; Schlattl, H.*; Zankl, M.*; Spielman, V.*
Radiation and Environmental Biophysics, 60(1), p.93 - 113, 2021/03
Times Cited Count：2 Percentile：26.61(Biology)In this study, the nuclide-specific organ dose coefficients of pregnant female and its fetus for environmental external exposures have been evaluated. The radiation sources were uniformly put in the soil at the depth of 0.5 g cm
or in the atmosphere. The environmental radiation fields for the soil contamination were analyzed by using the radiation transport code PHITS, and the fields for the air submersion were taken from the existing data analyzed by the YURI code. The numerical models of the pregnant female and its fetus were put in the environmental radiation fields, and the radiation transport simulations were performed using the EGS code to obtain the organ absorbed doses. From the simulation results, it was found that the radionuclide-specific uterus doses of the pregnant female agreed with the total body doses of the fetus within 6%, except for some radionuclides which emit the low-energy photons below 50 keV. Using the organ dose coefficients evaluated in the present study, the doses of the pregnant female and its fetus can be estimated easily from the data of activity concentration of the radionuclides distributed in the environment.
