Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Konno, Chikara; Ota, Masayuki*; Kwon, Saerom*; Onishi, Seiki*; Yamano, Naoki*; Sato, Satoshi*
Journal of Nuclear Science and Technology, 60(9), p.1046 - 1069, 2023/09
Times Cited Count：4 Percentile：98.08(Nuclear Science & Technology)JENDL-5 was validated from a viewpoint of shielding applications under the Shielding Integral Test Working Group of the JENDL Committee. The following benchmark experiments were selected: JAEA/FNS in-situ experiments, Osaka Univ./OKTAVIAN TOF experiments, ORNL/JASPER sodium experiments, NIST iron experiment and QST/TIARA experiments. These experiments were analyzed with MCNP and nuclear data libraries (JENDL-5, JENDL-4.0 or JENDL-4.0/HE, ENDF/B-VIII.0 and JEFF-3.3). The analysis results demonstrate that JENDL-5 is comparable to or better than JENDL-4.0 or JENDL-4.0/HE, ENDF/B-VIII.0 and JEFF-3.3.
Machida, Masahiko; Yamada, Susumu; Kim, M.; Okumura, Masahiko; Miyamura, Hiroko; Shikaze, Yoshiaki; Sato, Tomoki*; Numata, Yoshiaki*; Tobita, Yasuhiro*; Yamaguchi, Takashi; et al.
RIST News, (69), p.2 - 18, 2023/09
The contamination of radioactive materials leaked from the reactor has resulted in numerous hot spots in the Fukushima Daiichi Nuclear Power Station (1F) building, posing obstacles to its decommissioning. In order to solve this problem, JAEA has conducted research and development of the digital technique for inverse estimation of radiation source distribution and countermeasures against the estimated source in virtual space for two years from 2021 based on the subsidy program "Project of Decommissioning and Contaminated Water Management" performed by the funds from the Ministry of Economy, Trade and Industry. In this article, we introduce the results of the project and the plan of the renewal project started in April 2023. For the former project, we report the derivative method for LASSO method considering the complex structure inside the building and the character of the source and show the result of the inverse estimation using the method in the real reactor building. Moreover, we explain the platform software "3D-ADRES-Indoor" which integrates these achievements. Finally, we introduce the plan of the latter project.
OKondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.
Nature, 620(7976), p.965 - 970, 2023/08
Times Cited Count：5 Percentile：92.64(Multidisciplinary Sciences)no abstracts in English
Nomoto, Yasunobu; Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; Noguchi, Hiroki; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 6 Pages, 2023/05
-edge for Ce in bauxites using transition-edge sensors; Implications for Ti-rich geological samplesLi, W.*; Yamada, Shinya*; Hashimoto, Tadashi; Okumura, Takuma*; Hayakawa, Ryota*; Nitta, Kiyofumi*; Sekizawa, Oki*; Suga, Hiroki*; Uruga, Tomoya*; Ichinohe, Yuto*; et al.
Analytica Chimica Acta, 1240, p.340755_1 - 340755_9, 2023/02
Times Cited Count：2 Percentile：31.9(Chemistry, Analytical)no abstracts in English
Nakayama, Hiromasa; Onodera, Naoyuki; Satoh, Daiki
Isotope News, (785), p.20 - 23, 2023/02
We developed the local-scale high-resolution atmospheric dispersion and dose assessment system (LHADDAS) for safety and consequence assessment of nuclear facilities and emergency response to nuclear accidents or deliberate releases of radioactive materials in built-up urban areas. This system comprises three parts, namely, preprocessing of input files, main calculation by a local-scale high-resolution atmospheric dispersion model using large-eddy simulation (LOHDIM-LES) or a real-time urban dispersion simulation model based on a lattice Boltzmann method (CityLBM), and postprocessing of dose calculation by a simulation code powered by lattice dose-response functions (SIBYL). LHADDAS has a broad utility and performs excellently in (1) simulating turbulent flows, plume dispersion, and dry deposition under realistic meteorological conditions; (2) simulating real-time tracer dispersion using a locally mesh-refined lattice Boltzmann method; and (3) estimating the air dose rates of radionuclides from air concentrations and surface deposition in consideration of the influence of individual buildings and structures. This system is promising for use in safety assessment of nuclear facilities (as an alternative to wind tunnel experiments), detailed pre/post-analyses of local-scale radioactive plume dispersion in case of nuclear accidents, and quick response to emergency situations resulting from deliberate release of radioactive materials by terrorist attacks in central urban district areas.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke; Abe, Yutaka*; Tsubakihara, Kosuke*; Okumura, Shin*; Ishizuka, Chikako*; Yoshida, Tadashi*; et al.
Journal of Nuclear Science and Technology, 60(1), p.1 - 60, 2023/01
Times Cited Count：64 Percentile：99.99(Nuclear Science & Technology)Kobayashi, Aine*; Toyama, Takeshi*; Nakamura, Takeshi*; Shobuda, Yoshihiro; Ishii, Koji*; Tomizawa, Masahito*; Takeuchi, Yasunao*; Sato, Yoichi*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.19 - 23, 2023/01
In the J-PARC main ring, density modulation due to longitudinal beam instability occurs during the debunching process of coasting beams. This leads to the generation of an electron cloud, which in turn causes transverse beam instabilities. The transverse beam instability causes beam loss and the electron cloud is assumed to cause vacuum degradation, both of which hinder the beam intensity enhancement, so it is essential to clarify the causes and countermeasures. In particular, the longitudinal impedance of several hundred MHz has been investigated as relevant, and measures to reduce the impedance of individual devices are underway. The Eddy-current type septum magnet, newly installed this year, was found to have a large impedance by simulation. Therefore, we are investigating a method to reduce the impedance by a flange loaded with SiC radio wave absorber, which can be applied to locations where there is no spatial margin to install a taper. In this report, we will discuss the characterization of SiC to be used in actual devices, impedance simulation reflecting the results of SiC evaluation, and evaluation of the effect of impedance countermeasures by impedance measurement using the wire method, and progress in evaluating the effect on the beam by beam simulation and beam study.
Ito, Daisuke*; Sato, Hirotaka*; Odaira, Naoya*; Saito, Yasushi*; Parker, J. D.*; Shinohara, Takenao; Kai, Tetsuya; Oikawa, Kenichi
Journal of Nuclear Materials, 569, p.153921_1 - 153921_6, 2022/10
Times Cited Count：1 Percentile：31.61(Materials Science, Multidisciplinary)Nakayama, Hiromasa; Onodera, Naoyuki; Satoh, Daiki; Nagai, Haruyasu; Hasegawa, Yuta; Idomura, Yasuhiro
Journal of Nuclear Science and Technology, 59(10), p.1314 - 1329, 2022/10
Times Cited Count：5 Percentile：84.97(Nuclear Science & Technology)We developed a local-scale high-resolution atmospheric dispersion and dose assessment system (LHADDAS) for safety and consequence assessment of nuclear facilities and emergency response to nuclear accidents or deliberate releases of radioactive materials in built-up urban areas. This system is composed of pre-processing of input files, main calculation by local-scale high-resolution atmospheric dispersion model using large-eddy simulation (LOHDIM-LES) and real-time urban dispersion simulation model based on a lattice Boltzmann method (CityLBM), and post-processing of dose-calculation by simulation code powered by lattice dose-response functions (SIBYL). LHADDAS has a broad utility and offers superior performance in (1) simulating turbulent flows, plume dispersion, and dry deposition under realistic meteorological conditions, (2) performing real-time tracer dispersion simulations using a locally mesh-refined lattice Boltzmann method, and (3) estimating air dose rates of radionuclides from air concentrations and surface deposition in consideration of the influence of individual buildings and structures. This system is promising for safety assessment of nuclear facilities as an alternative to wind tunnel experiments, detailed pre/post-analyses of a local-scale radioactive plume dispersion in case of nuclear accidents, and quick response to emergency situations resulting from deliberate release of radioactive materials by a terrorist attack in an urban central district area.
Ishii, Yui*; Yamamoto, Arisa*; Sato, Naoki*; Nambu, Yusuke*; Kawamura, Seiko; Murai, Naoki; Ohara, Koji*; Kawaguchi, Shogo*; Mori, Takao*; Mori, Shigeo*
Physical Review B, 106(13), p.134111_1 - 134111_7, 2022/10
Times Cited Count：0 Percentile：0(Materials Science, Multidisciplinary)Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count：6 Percentile：84.97(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Review 2022-016, 193 Pages, 2022/08
JAEA-Review-2022-016.pdf:42.06MB
Aiming to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR), Japan Atomic Energy Agency (JAEA) is planning a HTTR heat application test producing hydrogen with High Temperature Engineering Test Reactor (HTTR) achieved 950
C of the highest reactor outlet coolant temperature in the world. In the HTTR heat application test, it is required to establish its safety design realizing highly safe connection of a HTGR and a hydrogen production plant by the Nuclear Regulation Authority to obtain the permission of changes to reactor installation. However, installation of a system connecting the hydrogen production plant and a nuclear reactor, and its safety design has not been conducted so far in conventional nuclear power plant including HTTR in the world. A special committee on the HTTR heat application test, established under the HTGR Research and Development Center, considered a safety design philosophy for the HTTR heat application test based on an authorized safety design of HTTR in terms of conformity to the New Regulatory Requirements taking into account new considerable events as a result of the plant modification and connection of the hydrogen production plant. This report provides materials of the special committee such as technical reports, comments provided from committee members, response from JAEA for the comments and minutes of the committee.
At]NaAt and [
I]NaI in an NIS-expressing thyroid cancer mouse modelWatabe, Tadashi*; Liu, Y.*; Kaneda, Kazuko*; Sato, Tatsuhiko; Shirakami, Yoshifumi*; Oe, Kazuhiro*; Toyoshima, Atsushi*; Shimosegawa, Eku*; Wang, Y.*; Haba, Hiromitsu*; et al.
International Journal of Molecular Sciences (Internet), 23(16), p.9434_1 - 9434_11, 2022/08
Times Cited Count：7 Percentile：78.48(Biochemistry & Molecular Biology)In this study, we compare the therapeutic effect between [At]NaAt and [I]NaI. In vitro analysis of double-stranded DNA break (DSB) and colony formation assay were performed using K1-NIS cells. [At]NaAt induced higher numbers of DSBs and had a reduced colony formation than [I]NaI. In K1-NIS mice, dose-dependent therapeutic effects were observed in both [At]NaAt and [I]NaI. The superior therapeutic effect of [At]NaAt suggests the promising clinical applicability of targeted alpha therapy using [At]NaAt in patients with differentiated thyroid cancer refractory to standard [I]NaI treatment.
Aoki, Takeshi; Shimizu, Atsushi; Iigaki, Kazuhiko; Okita, Shoichiro; Hasegawa, Takeshi; Mizuta, Naoki; Sato, Hiroyuki; Sakaba, Nariaki
JAEA-Technology 2022-011, 60 Pages, 2022/07
JAEA-Technology-2022-011.pdf:2.08MB
Japan Atomic Energy Agency is planning a High Temperature Engineering Test Reactor (HTTR) heat application test producing hydrogen with the HTTR which achieved the highest reactor outlet coolant temperature of 950C in the world to realize a massive, cost-effective and carbon-free hydrogen production technology utilizing a high temperature gas cooled reactor (HTGR). In the HTTR heat application test, it is required to establish its safety design for coupling a hydrogen production plant to HTGR through the licensing by the Nuclear Regulation Authority (NRA). A draft of a safety design philosophy for the HTTR heat application test facility was considered taking into account postulated events due to the plant modification and coupling of the hydrogen production plant based on the HTTR safety design which was authorized through the safety review of the NRA against New Regulatory Requirements. The safety design philosophy was examined to apply proven conventional chemical plant standards to the hydrogen production plant for ensuring public safety against disasters caused by high pressure gases. This report presents a result of a consideration on safety design philosophies regarding the reasonability and condition to apply the High Pressure Gas Safety Act for the hydrogen production plant, safety classifications, seismic design classification, identification of important safety system.
Kasahara, Naoto*; Yamano, Hidemasa; Nakamura, Izumi*; Demachi, Kazuyuki*; Sato, Takuya*; Ichimiya, Masakazu*
Transactions of 26th International Conference on Structural Mechanics in Reactor Technology (SMiRT-26) (Internet), 8 Pages, 2022/07
Utilizing fracture control, we are developing a technology to suppress the expansion of damage caused by an event that exceeds the design assumption. We made a plan to develop three issues; (1) Technology for mitigating failure consequence at extremely high temperatures, (2) Technology for mitigating failure consequence against excessive earthquakes, and (3) Methodology for improving reactor structure resilience.
Iwamoto, Yosuke; Hashimoto, Shintaro; Sato, Tatsuhiko; Matsuda, Norihiro; Kunieda, Satoshi; 
elik, Y.*; Furutachi, Naoya*; Niita, Koji*
Journal of Nuclear Science and Technology, 59(5), p.665 - 675, 2022/05
Times Cited Count：8 Percentile：81.24(Nuclear Science & Technology)A benchmark study of PHITS3.24 has been conducted using neutron-shielding experiments listed in the Shielding Integral Benchmark Archive and Database. Five neutron sources were selected, which are generated from (1) 43- and 68-MeV proton-induced reaction on a thin lithium target, (2) 52-MeV proton-induced reaction on a thick graphite target, (3) 590-MeV proton-induced reaction on a thick lead target, (4) 500-MeV proton-induced reaction on a thick tungsten target, and (5) 800-MeV proton-induced reaction on a thick tantalum target. For all cases, overall agreements in the results are satisfactory when using the JENDL-4.0/HE to simulate neutron- and proton-induced reactions up to 200 MeV. However, discrepancies using PHITS default settings are observed in the results. For an accurate neutron-shielding design for accelerator facilities, using JENDL-4.0/HE in the particle and heavy-ion transport code system calculation is favorable.
Sr dissolved solution on corrosion potential of type 316L stainless steelAoyama, Takahito; Kato, Chiaki; Sato, Tomonori; Sano, Naruto; Yamashita, Naoki; Ueno, Fumiyoshi
Zairyo To Kankyo, 71(4), p.110 - 115, 2022/04
no abstracts in English
-iron investigated using in situ high-voltage electron microscopyAbe, Yosuke; Sato, Yuki*; Hashimoto, Naoyuki*
Philosophical Magazine, 102(12), p.1173 - 1193, 2022/00
Times Cited Count：2 Percentile：34.67(Materials Science, Multidisciplinary)We measured the growth rate of self-interstitial atom (SIA) clusters in electron-irradiated -iron at 275-320 K using in situ high-voltage electron microscopy. To improve the statistical accuracy of the measurement, we used photographic films and video data. This enabled analysis of a considerable amount of data by extracting several SIA clusters and tracking their size growth using image processing techniques. By fitting the temperature-dependent cluster growth rate to the Arrhenius relations derived using rate theory analysis, we obtained vacancy migration energy of 
eV. In addition, the effects of impurities leading to decrease in the cluster growth rate were briefly discussed.
