Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta*; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
EPJ Web of Conferences, 284, p.01023_1 - 01023_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron, lead, and bismuth have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics. The measured TTNYs and DDXs were compared with calculations by the Monte Carlo transport code PHITS with its default physics model of INCL version 4.6 combined with GEM and those with the JENDL-4.0/HE nuclear data library.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
Journal of Nuclear Science and Technology, 60(4), p.435 - 449, 2023/04
Times Cited Count：3 Percentile：68.71(Nuclear Science & Technology)Double-differential thick target neutron yields (TTNYs) for Fe, Pb, and Bi targets induced by 107-MeV protons were measured using the fixed-field alternating gradient accelerator at Kyoto University for research and development of accelerator-driven systems (ADSs) and fundamental ADS reactor physics research at the Kyoto University Critical Assembly (KUCA). Note that TTNYs were obtained with the time-of-flight method using a neutron detector system comprising eight neutron detectors; each detector has a small NE213 liquid organic scintillator and photomultiplier tube. The TTNYs obtained were compared with calculation results using Monte Carlo-based spallation models (i.e., INCL4.6/GEM, Bertini/GEM, JQMD/GEM, and JQMD/SMM/GEM) and the evaluated high-energy nuclear data library, i.e., JENDL-4.0/HE, implemented in the particle and heavy iontransport code system (PHITS). All models, including JENDL-4.0/HE, failed to predict high-energy peaks at a detector angle of 5
. Comparing the energy- and angle-integrated spallation neutron yields at energies of 
20 MeV estimated using the measured TTNYs and the PHITS indicated that INCL4.6/GEM would be suitable for the Monte Carlo transport simulation of ADS reactor physics experiments at the KUCA.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; Yashima, Hiroshi*; Nishio, Katsuhisa; et al.
JAEA-Conf 2022-001, p.129 - 133, 2022/11
For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors composed of the NE213 liquid organic scintillators and photomultiplier tubes, which were connected to a multi-channel digitizer mounted with a field-programmable gate array (FPGA), for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination applying the gate integration method to the FPGA. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics.
Ni and Zr at 0.4, 1.3, 2.2, and 3.0 GeVTakeshita, Hayato*; Meigo, Shinichiro; Matsuda, Hiroki*; Iwamoto, Hiroki; Nakano, Keita; Watanabe, Yukinobu*; Maekawa, Fujio
Nuclear Instruments and Methods in Physics Research B, 527, p.17 - 27, 2022/09
Times Cited Count：2 Percentile：53.91(Instruments & Instrumentation)To improve accuracy of nuclear design of accelerator driven nuclear transmutation systems and so on, nuclide production cross sections on Ni and Zr were measured for GeV energy protons. The measured results were compared with PHITS calculations, JENDL/HE-2007 and so on.
K
(Zn
Mn
)
As studied by X-ray magnetic circular dichroism and resonant inelastic X-ray scatteringSuzuki, Hakuto*; Zhao, G.*; Okamoto, Jun*; Sakamoto, Shoya*; Chen, Z.-Y.*; Nonaka, Yosuke*; Shibata, Goro; Zhao, K.*; Chen, B.*; Wu, W.-B.*; et al.
Journal of the Physical Society of Japan, 91(6), p.064710_1 - 064710_5, 2022/06
Times Cited Count：0 Percentile：0(Physics, Multidisciplinary)Nakano, Keita; Iwamoto, Hiroki; Nishihara, Kenji; Meigo, Shinichiro; Sugawara, Takanori; Iwamoto, Yosuke; Takeshita, Hayato*; Maekawa, Fujio
JAEA-Research 2021-018, 41 Pages, 2022/03
JAEA-Research-2021-018.pdf:2.93MB
Neutronic analysis of beam window of the Accelerator-Driven System (ADS) proposed by Japan Atomic Energy Agency (JAEA) has been conducted using PHITS and DCHAIN-PHITS codes. We investigate gas production of hydrogen and helium isotopes in the beam window, displacement per atom of beam window material, and heat generation in the beam window. In addition, distributions of produced nuclides, heat density, and activity are derived. It was found that at the maximum 12500 appm H production, 1800 appm He production, and damage of 62.1 DPA occurred in the beam window by the ADS operation. On the other hand, the maximum heat generation in the beam window was 374 W/cm
. In the analysis of LBE, 
Bi and 
Po were found to be the dominant nuclides in decay heat and radioactivity. Furthermore, the heat generation in the LBE by the proton beam was maximum around 5 cm downstream of the beam window, which was 945 W/cm.
Nakano, Keita; Matsuda, Hiroki*; Meigo, Shinichiro; Iwamoto, Hiroki; Takeshita, Hayato*; Maekawa, Fujio
JAEA-Research 2021-014, 25 Pages, 2022/03
JAEA-Research-2021-014.pdf:2.1MB
For the development of accelerator-driven transmutation system (ADS), measurement of nuclide production cross-sections in proton-induced reactions on 
Be, C, 
Al, 
Sc, and V have been performed. The measured data are compared with the calculations by the latest nuclear reaction models and with the nuclear data library to investigate the reproducibilities.
Lu target irradiated with 0.4-, 1.3-, 2.2-, and 3.0-GeV protonsTakeshita, Hayato; Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Hiroki; Nakano, Keita; Watanabe, Yukinobu*; Maekawa, Fujio
JAEA-Conf 2021-001, p.207 - 212, 2022/03
Prediction of nuclide production of spallation products by high-energy proton injection plays a fundamental and important role in shielding design of high-intensity proton accelerator facilities such as accelerator driven nuclear transmutation system (ADS). Since the prediction accuracy of the nuclear reaction models used in the production quantity prediction simulation is insufficient, it is necessary to improve the nuclear reaction models. We have measured nuclide production cross sections for various target materials with the aim of acquiring experimental data and improving nuclear reaction models. In this study, 1.3-, 2.2- and 3.0-GeV proton beams were irradiated to Lu target, and nuclide production cross-section data were acquired by the activation method. The measured data were compared with several nuclear reaction models used in Monte Carlo particle transport calculation codes to grasp the current prediction accuracy and to study how the nuclear reaction model could be improved.
Takeshita, Hayato*; Meigo, Shinichiro; Matsuda, Hiroki*; Iwamoto, Hiroki; Nakano, Keita; Watanabe, Yukinobu*; Maekawa, Fujio
Nuclear Instruments and Methods in Physics Research B, 511, p.30 - 41, 2022/01
Times Cited Count：5 Percentile：65.59(Instruments & Instrumentation)Nuclide production cross sections for proton-induced reactions on Mn and Co at incident energies of 1.3, 2.2, and 3.0 GeV were measured by the activation method at the J-PARC. In total, 143 production cross sections of reaction products were obtained. Among them, the cross sections of 
Mn(p,X)
S and Mn(p,X)
Ar were measured for the first time. The stable proton beam and well established beam monitoring system contributed to the reduction of the systematic uncertainties to typically less than 5%, which was better than those of the previous data. To examine the prediction capabilities of spallation reaction models and evaluated data library, the measured data were compared with the spallation reaction models in PHITS (INCL4.6/GEM, etc.), INCL++/ABLA07, and the JENDL/HE-2007 library. The comparison of the mean square deviation factors indicated that both INCL4.6/GEM and JENDL/HE-2007 showed better agreement with the measured data than the others.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
JPS Conference Proceedings (Internet), 33, p.011050_1 - 011050_6, 2021/03
R&D of the beam window is crucial in the ADS, which serves as a partition between the accelerator and the target region. Although the displacement per atom (DPA) is used to evaluate the damage on the window, experimental data on the displacement cross section is scarce in the energy region above 20 MeV. We started to measure the displacement cross section for the protons in the energy region between 0.4 to 3 GeV. The displacement cross section can be derived by resistivity change divided by the proton flux and the resistivity change per Frankel pair on cryo-cooled sample to maintain damage. Experiments were conducted at the 3 GeV proton synchrotron at the J-PARC Center, and aluminum and copper was used as samples. As a result of comparison between the present experiment and the calculation of the NRT model, which is widely used for calculation of the displacement cross section, it was found that the calculation of the NRT model overestimated the experiment by about 3 times.
Takeshita, Hayato; Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Hiroki; Maekawa, Fujio; Watanabe, Yukinobu*
JPS Conference Proceedings (Internet), 33, p.011045_1 - 011045_6, 2021/03
To improve accuracy of nuclear design of accelerator driven nuclear transmutation systems, nuclide production cross sections on Ni and Zr, which were candidate materials to be used in ADS, were measured for GeV energy protons. The measured results were compared with PHITS calculations and JENDL/HE-2007.
Fe for 0.4-3.0 GeV protons in J-PARCMatsuda, Hiroki; Takeshita, Hayato*; Meigo, Shinichiro; Maekawa, Fujio; Iwamoto, Hiroki
JPS Conference Proceedings (Internet), 33, p.011047_1 - 011047_6, 2021/03
Accurate nuclide production cross-section data are required for the design of Accelerator-Driven nuclear transmutation System (ADS) such as the design of radioactive waste disposal, design of remote-handling procedure of highly activated components, and evaluation of exposure doses of rad-workers. Although much efforts have been devoted to nuclide production cross-section measurements so far, uncertainties of the measured data are sometimes large as several tens percentage, and there is no experimental data in the GeV energy region even for some of important nuclides. In this study, proton induced nuclide production cross-section of iron, which is the most important constituent element of steel, was measured. The present experiment was compared with calculations by the PHITS code with several physics models including Bertini and INCL4.6 and evaluated nuclear data JENDL-HE/2007. The most significant discrepancy found in this study was the production cross sections via the (p,xn) reaction. It was suggested that further improvements, such as the in-medium effect on the nucleon-nucleon scattering and the Pauli blocking, were required in the intra-nuclear cascade models used in this study.
for a mercury target induced by 3-GeV protonsMatsuda, Hiroki; Iwamoto, Hiroki; Meigo, Shinichiro; Takeshita, Hayato*; Maekawa, Fujio
Nuclear Instruments and Methods in Physics Research B, 483, p.33 - 40, 2020/11
Times Cited Count：3 Percentile：36.4(Instruments & Instrumentation)A thick target neutron yield for a mercury target at an angle of 180 from the incident beam direction is measured with the time-of-flight method using a 3-GeV proton beam at the Japan Proton Accelerator Research Complex (J-PARC). Comparing the experimental result with a Monte Carlo particle transport simulation by the Particle and Heavy Ion Transport code System (PHITS) shows that there are apparent discrepancies. We find that this trend is consistent with an experimental result of neutron-induced re- action rates obtained using indium and niobium activation foils. Comparing proton-induced neutron-production double-differential cross-sections for a lead target at backward directions between the PHITS calculation and experimental data suggests that the dis- crepancies for our experiments would be linked to the neutron production calculation around 3 GeV by the PHITS spallation model and/or the calculation of nonelastic cross-sections around 3 GeV in the particle transport simulation.
Matsuda, Hiroki; Meigo, Shinichiro; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
Journal of Nuclear Science and Technology, 57(10), p.1141 - 1151, 2020/10
Times Cited Count：9 Percentile：75.92(Nuclear Science & Technology)To estimate the structural damages of materials in accelerator facilities, displacement per atom (dpa) is widely employed as a damage index, calculated based on the displacement cross-section obtained using a calculation model. Although dpa is applied as standard, the experimental data of the displacement cross-section for a proton in the energy region above 20 MeV are scarce. Among the calculation models, difference of about factor 8 exist, so that the experimental data of the cross-section are crucial to validate the model. To obtain the displacement cross-section, we conducted experiments at J-PARC. The displacement cross-section of copper and iron was successfully obtained for a proton projectile with the kinetic energies, 0.4 - 3 GeV. The results were compared with those obtained using the widely utilized Norgertt-Robinson-Torrens (NRT) model and the athermal-recombination-corrected (arc) model based on molecular dynamics. It was found that the NRT model overestimates the present displacement cross-section by 3.5 times. The calculation results obtained using with the arc model based on the Nordlund parameter show remarkable agreement with the experimental data. It can be concluded that the arc model must be employed for the dpa calculation for the damage estimation of copper and iron.
Matsuda, Hiroki; Meigo, Shinichiro; Iwamoto, Hiroki; Maekawa, Fujio
EPJ Web of Conferences, 239, p.06004_1 - 06004_4, 2020/09
Times Cited Count：1 Percentile：72.93(Nuclear Science & Technology)For the Accelerator-Driven nuclear transmutation System (ADS), nuclide production yield estimation in the lead-bismuth target is important to manage the target. However, experimental data of nuclide production yield by spallation and high-energy fission reactions are scarce. In order to obtain the experimental data, we experimented in J-PARC using Pb and 
Bi samples. The samples were irradiated with protons at various kinematic energy points between 0.4 and 3.0 GeV. After the irradiation, the nuclide production cross section over 
Be to 
Re was obtained by spectroscopic measurement of decay gamma-rays from the samples with HPGe detectors. The present experimental results were compared with the evaluated data (JENDL-HE/2007) and the calculation with the PHITS code and the INCL++ code. The present experiment data showed consistency with other experimental data with better accuracy than other ones. In reactions to produce light nuclides, JENDL and calculation with the PHITS and INCL++ for Be production agreed with the data.
Na production, however, underestimated about 1/10 times. For middle to heavy nuclide productions cases, both calculations agreed with the experiment by a factor of two. JENDL showed lower energy having a maximum value of excitation function maximal value than the experimental data.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
EPJ Web of Conferences, 239, p.06006_1 - 06006_4, 2020/09
Times Cited Count：0 Percentile：0.1(Nuclear Science & Technology)R&D of the beam window is crucial in the ADS, which serves as a partition between the accelerator and the target region. Although the displacement per atom (DPA) is used to evaluate the damage on the window, experimental data on the displacement cross section is scarce in the energy region above 20 MeV. We started to measure the displacement cross section for the protons in the energy region between 0.4 to 3 GeV. The displacement cross section can be derived by resistivity change divided by the proton flux and the resistivity change per Frankel pair on cryo-cooled sample to maintain damage. Experiments were conducted at the 3 GeV proton synchrotron at the J-PARC Center, and copper was used as samples. As a result of comparison between the present experiment and the calculation of the NRT model, which is widely used for calculation of the displacement cross section, it was found that the calculation of the NRT model overestimated the experiment by about 3 times.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
JPS Conference Proceedings (Internet), 28, p.061004_1 - 061004_6, 2020/02
no abstracts in English
Miyahara, Shinya*; Ohdaira, Naoya*; Arita, Yuji*; Maekawa, Fujio; Matsuda, Hiroki; Sasa, Toshinobu; Meigo, Shinichiro
Nuclear Engineering and Design, 352, p.110192_1 - 110192_8, 2019/10
Times Cited Count：5 Percentile：48.99(Nuclear Science & Technology)Lead-Bismuth Eutectic (LBE) is used as a spallation neutron target and coolant materials of Accelerator Driven System (ADS), and many kinds of elements are produced as spallation products. It is important to evaluate the release and transport behavior of the spallation products in the LBE. The inventories and the physicochemical composition of the spallation products produced in LBE have been investigated for an LBE loop in the ADS Target Test Facility (TEF-T) in J-PARC. The inventories of the spallation products in the LBE were estimated using the PHITS code. The physicochemical composition of the spallation products in the LBE was calculated using the Thermo-Calc code under the conditions of the operation temperatures of LBE from 350C to 500C and the oxygen concentrations in LBE from 10 ppb to 1 ppm. The calculation showed that the 5 elements of Rb, Tl, Tc, Os, Ir, Pt, Au and Hg were soluble in LBE under the all given conditions and any kinds of compound were not formed in LBE. It was suggested that the oxides of Ce, Sr, Zr and Y were stable as CeO
, SrO, ZrO and YO
in the LBE.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Iwamoto, Hiroki; Hasegawa, Shoichi; Maekawa, Fujio; Yoshida, Makoto*; Ishida, Taku*; Makimura, Shunsuke*; Nakamoto, Tatsushi*
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.499 - 501, 2018/06
no abstracts in English
Iwamoto, Hiroki; Maekawa, Fujio; Matsuda, Hiroki; Meigo, Shinichiro
JAEA-Technology 2017-029, 39 Pages, 2018/01
JAEA-Technology-2017-029.pdf:2.68MB
Under an assumption that an incident of lead-bismuth eutectic (LBE) leak from an LBE circulation system occurred during a 250-kW beam operation, an estimation of radiation dose at the site boundary for the ADS Target Test Facility (TEF-T) in Transmutation Experimental Facility (TEF) of J-PARC was conducted using various conservative assumptions. As a result, the radiation dose at the site boundary was estimated to be about 660 
Sv, which were dominated by mercury, noble gas, and iodine produced as spallation products from the LBE. Even though the incident scenario was made conservatively, it was shown that the estimated total dose was lower than the annual radiation dose due to natural sources, and the TEF-T has sufficient safety margin for the leak of radioactivity.
