Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Otsuka, Satoshi; Tanno, Takashi; Oka, Hiroshi; Yano, Yasuhide; Tachi, Yoshiaki; Kaito, Takeji; Hashidate, Ryuta; Kato, Shoichi; Furukawa, Tomohiro; Ito, Chikara; et al.
2018 GIF Symposium Proceedings (Internet), p.305 - 314, 2020/05
Oxide Dispersion Strengthened (ODS) steel has been developed worldwide as a high-strength and radiation-tolerant steel used for advanced nuclear system. Japan Atomic Energy Agency (JAEA) has been developing ODS steel as the primary candidate material of Sodium cooled Fast Reactor (SFR) high burn-up fuel cladding tube. Application of high burn-up fuel to SFR core can contribute to improvement of economical performance of SFR in conjunction with volume and hazardousness reduction of radioactive waste. This paper described the current status and future prospects of ODS tempered martensitic steel development in JAEA for SFR fuel application.
Takei, Hayanori; Furukawa, Kazuro*; Yano, Yoshiharu*; Ogawa, Yujiro*
Journal of Nuclear Science and Technology, 55(9), p.996 - 1008, 2018/09
Times Cited Count：2 Percentile：20.93(Nuclear Science & Technology)Experiences with existing high-power proton accelerators indicate that frequent beam trips are inevitable. One of the reasons for such frequent beam trips is the accidental interruption to protect accelerators against fatal failures. Generally, the failure frequency for the general machinery can be evaluated based on a reliability database for its components. On the other hand, the beam-trip frequency for the accidental interruption was not evaluated based on the reliability database because it has not yet been established. A principal reason for the lack of this reliability database is the inconsistency of data collection and analysis methods among laboratories. For example, there are at least three methods to estimate Mean Time Between accidental Interruptions (MTBI) for klystron systems. In the present study, the MTBI of the klystron systems of an electron/positron injector linac at the High Energy Accelerator Research Organization (KEK) was evaluated based on the reliability engineering method, in order to build the reliability database using the unified data collection and analysis method. As the result, the mean values of the MTBI by the traditional three methods were evaluated as 30.9, 32.0, and 50.4 hours. On the other hand, that by the reliability engineering method was evaluated as 57.3 hours, i.e., more than 1.14 times of the traditional results. Although these results are obviously different from traditional results, it appears that the present estimation based on the reliability engineering method is suitable for the MTBI of accelerator components as typified by the klystron system.
sp.Biswas, K.; Mori, Takeshi*; Kogawara, Satoshi*; Narumi, Issei; Ono, Yutaka
JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 100, 2013/01
Sonoda, Tetsu*; Wada, Michiharu*; Tomita, Hideki*; Sakamoto, Chika*; Takatsuka, Takaaki*; Furukawa, Takeshi*; Iimura, Hideki; Ito, Yuta*; Kubo, Toshiyuki*; Matsuo, Yukari*; et al.
Nuclear Instruments and Methods in Physics Research B, 295, p.1 - 10, 2013/01
Times Cited Count：21 Percentile：83.85(Instruments & Instrumentation)no abstracts in English
Wakai, Eiichi; Kondo, Hiroo; Sugimoto, Masayoshi; Fukada, Satoshi*; Yagi, Juro*; Ida, Mizuho; Kanemura, Takuji; Furukawa, Tomohiro; Hirakawa, Yasushi; Watanabe, Kazuyoshi; et al.
Purazuma, Kaku Yugo Gakkai-Shi, 88(12), p.691 - 705, 2012/12
no abstracts in English
L. var. 
Koehne)Biswas, K.; Mori, Takeshi*; Kogawara, Satoshi*; Hase, Yoshihiro; Narumi, Issei; Ono, Yutaka
American Journal of Plant Sciences, 3(9), p.1181 - 1186, 2012/09
Sakanaka, Shogo*; Akemoto, Mitsuo*; Aoto, Tomohiro*; Arakawa, Dai*; Asaoka, Seiji*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05
Future synchrotron light source using a 5-GeV energy recovery linac (ERL) is under proposal by our Japanese collaboration team, and we are conducting R&D efforts for that. We are developing high-brightness DC photocathode guns, two types of cryomodules for both injector and main superconducting (SC) linacs, and 1.3 GHz high CW-power RF sources. We are also constructing the Compact ERL (cERL) for demonstrating the recirculation of low-emittance, high-current beams using above-mentioned critical technologies.
Park, J.-H.*; Wakahara, Akihiro*; Okada, Hiroshi*; Furukawa, Yuzo*; Kim, Y.-T.*; Chang, H.-J.*; Song, J.*; Shin, S.*; Lee, J.-H.*; Sato, Shinichiro; et al.
Japanese Journal of Applied Physics, 49(3), p.032401_1 - 032401_5, 2010/03
Times Cited Count：1 Percentile：5.52(Physics, Applied)Takei, Hayanori; Nishihara, Kenji; Tsujimoto, Kazufumi; Furukawa, Kazuro*; Yano, Yoshiharu*; Ogawa, Yujiro*; Oigawa, Hiroyuki
JAEA-Research 2009-023, 114 Pages, 2009/09
JAEA-Research-2009-023.pdf:8.86MB
Frequent beam trips as experienced in existing high power proton accelerators may cause thermal fatigue problems in ADS components which may lead to degradation of their structural integrity and reduction of their lifetime. Thermal transient analyses were performed to investigate the effects of beam trips on the reactor components. Our results indicated that the acceptable frequency of beam trips ranged from 50 to 
times per year depending on the beam trip duration. In order to consider measures to reduce the frequency of beam trips on the high power accelerator for ADS, we compared the acceptable frequency of beam trips with the operation data of existing accelerators. The result of this comparison showed that the beam trip frequency for durations of 10 seconds or less was within the acceptable level, while that exceeding five minutes should be reduced to about 1/30 to satisfy the thermal stress conditions.
Okada, Hiroshi*; Takemoto, Kazumasa*; Oikawa, Fumitake*; Furukawa, Yuzo*; Wakahara, Akihiro*; Sato, Shinichiro; Oshima, Takeshi
Physica Status Solidi (C), 6(Suppl.2), p.S631 - S634, 2009/05
Light emitting field effect transistor (FET) based-on AlGaN/GaN high electron mobility transistor (HEMT) structure with spatially selective doping of rare-earth ions (REIs) as a luminescence center in the channel is proposed and investigated. Fabricated device showed excellent I-V characteristics as a transistor with gate control. By applying a drain bias of 20 V, red emission suggesting a luminescence from Eu ion was clearly observed. Applying a negative bias to the Schottky gate decreased the luminescence intensity.
Takei, Hayanori; Nishihara, Kenji; Tsujimoto, Kazufumi; Furukawa, Kazuro*; Yano, Yoshiharu*; Ogawa, Yujiro*; Oigawa, Hiroyuki
Proceedings of International Topical Meeting on Nuclear Research Applications and Utilization of Accelerators (CD-ROM), 9 Pages, 2009/05
Frequent beam trips as experienced in existing high power proton accelerators may cause thermal fatigue problems in ADS components which may lead to degradation of their structural integrity and reduction of their lifetime. Thermal transient analyses were performed to investigate the effects of beam trips on the reactor components, with the objective of formulating ADS design that had higher engineering possibilities and determining the requirements for accelerator reliability. These analyses were made on the thermal responses of four parts of the reactor components; the beam window, the cladding tube, the inner barrel and the reactor vessel. Our results indicated that the acceptable frequency of beam trips ranged from 43 to 
times per year depending on the beam trip duration to keep the plant availability 70%. In order to consider measures to reduce the frequency of beam trips on the high power accelerator for ADS, we compared the acceptable frequency of beam trips with the operation data of existing accelerators. The result of this comparison showed that the beam trip frequency for durations of 10 seconds or less was within the acceptable level, while that exceeding five minutes should be reduced to about 1/35 to satisfy the plant availability conditions.
Sakanaka, Shogo*; Ago, Tomonori*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; Harada, Kentaro*; Hiramatsu, Shigenori*; Honda, Toru*; et al.
Proceedings of 11th European Particle Accelerator Conference (EPAC '08) (CD-ROM), p.205 - 207, 2008/06
Future synchrotron light sources based on the energy-recovery linacs (ERLs) are expected to be capable of producing super-brilliant and/or ultra-short pulses of synchrotron radiation. Our Japanese collaboration team is making efforts for realizing an ERL-based hard X-ray source. We report recent progress in our R&D efforts.
Takei, Hayanori; Tsujimoto, Kazufumi; Ouchi, Nobuo; Oigawa, Hiroyuki; Mizumoto, Motoharu*; Furukawa, Kazuro*; Ogawa, Yujiro*; Yano, Yoshiharu*
Proceedings of 5th International Workshop on the Utilisation and Reliability of High Power Proton Accelerators (HPPA-5), p.181 - 194, 2008/04
Frequent beam trips as experienced in existing high power proton accelerators may cause thermal fatigue problems in ADS components. Thermal transient analyses were performed to investigate the effects of beam trips on the reactor components. Our results indicate that the acceptable frequency of beam trips ranges from 50 to 25,000 times per year, depending on the beam trip duration. In order to measure the effect of reducing beam trips on the high power accelerator for ADS, we compared the difference between the acceptable frequency for beam trips and the operation data of existing accelerators. The result of this comparison shows that for typical conditions the beam trip frequency for durations of 10 seconds or less is within the acceptable level, while that exceeding 10 seconds should be reduced by about 1/30 to satisfy the thermal stress conditions.
Li(
, n)
B reactionIshiyama, Hironobu*; Hashimoto, Takashi; Ishikawa, Tomoko*; Watanabe, Yutaka*; Das, S. K.*; Miyatake, Hiroari; Mizoi, Yutaka*; Fukuda, Tomokazu*; Tanaka, Masahiko*; Fuchi, Yoshihide*; et al.
Physics Letters B, 640(3), p.82 - 85, 2006/09
Times Cited Count：33 Percentile：84.97(Astronomy & Astrophysics)The excitation function of the 
Li(,n)B reaction was measured while identifying the final state event by event in the region of E
= 0.7 - 2.6 MeV using a highly efficient detector system and a low-energy Li beam. The results are much improved both in statistics and precisions, and show smaller cross sections than those of previous measurements by a factor of more than 2 in the low-energy region of E
1.5 MeV. A resonance-like structure is found at around E = 0.85 MeV.
Li(,n)B reaction for astrophysical interestDas, S. K.*; Fukuda, Tomokazu*; Mizoi, Yutaka*; Ishiyama, Hironobu*; Miyatake, Hiroari*; Watanabe, Yutaka*; Hirayama, Yoshikazu*; Tanaka, Masahiko*; Yoshikawa, Nobuharu*; Jeong, S.-C.*; et al.
AIP Conference Proceedings 847, p.374 - 376, 2006/07
no abstracts in English
Hashimoto, Takashi; Ishiyama, Hironobu*; Ishikawa, Tomoko*; Kawamura, Takashi*; Nakai, Koji*; Watanabe, Yutaka*; Miyatake, Hiroari; Tanaka, Masahiko*; Fuchi, Yoshihide*; Yoshikawa, Nobuharu*; et al.
Nuclear Instruments and Methods in Physics Research A, 556(1), p.339 - 349, 2006/01
Times Cited Count：33 Percentile：89.07(Instruments & Instrumentation)A new type of three dimensional tracking and proportional gas counter has been developed. Adopting a gating-grid system, performance of the detector becomes stable under the injection rate of charged particles less than 4
10
pps. It is a useful detection system for astrophysical experiments using radioactive nuclear beams, since the efficiency is so high as 100 %.
; ;
Journal of Nuclear Materials, 43(3), p.321 - 329, 1972/00
Times Cited Count：2no abstracts in English
; ; ; ;
Journal of Nuclear Materials, 40, p.213 - 220, 1971/00
Times Cited Count：7no abstracts in English
Takei, Hayanori; Tsujimoto, Kazufumi; Oigawa, Hiroyuki; Mizumoto, Motoharu*; Ogawa, Yujiro*; Furukawa, Kazuro*; Yano, Yoshiharu*
no journal, ,
no abstracts in English
Okada, Hiroshi*; Takemoto, Kazumasa*; Shimojo, Takashi*; Hata, Takayuki*; Furukawa, Yuzo*; Wakahara, Akihiro*; Sato, Shinichiro; Oshima, Takeshi
no journal, ,
no abstracts in English
