Design and production of the valve used in Radioactive Liquid Disposal Facility

Nishimura, Arashi; Okada, Yuji; Sugaya, Naoto; Sonobe, Hiroshi; Kimura, Nobuaki; Kimura, Akihiro; Hanawa, Yoshio; Nemoto, Hiroyoshi

JAEA-Technology 2021-003, 51 Pages, 2021/05

JAEA-Technology-2021-003.pdf:5.55MB

In the Japan Materials Testing Reactor (JMTR), the leakage accidents of radioactive waste liquid were occurred from the tanks and pipes of the liquid waste disposal facility in the JMTR tank-yard building in JFY2014. In order to respond to the accident, obtain the approval of the JAEA to the design and construction method from JFY2016, the tanks and pipes were replaced from JFY2016 to 2019. In the replaced, the production of the tanks and pipes of the liquid waste disposal facility applied Japanese technical standards correspondingly. On the other hand, the valve did not fall under the category of Japanese technical standards. The manufacturing specifications when replacing the valve were decided based on the including the selecting the standards of production and inspection for valves, Fluid properties, experience in JMTR. The production proceeded while carrying out the decided inspection. The valves that passed all the inspections were installed together with the tanks and pipes of the liquid waste, and the finished inspection was performed as a systems. The construction was completed with those inspection passed. This report is summarized valve Design, production and installation.

Validation of repairing method for concrete wall of the JMTR tank-yard building

Sugaya, Naoto; Okada, Yuji; Nishimura, Arashi; Sonobe, Hiroshi; Kimura, Nobuaki; Kimura, Akihiro; Hanawa, Yoshio; Nemoto, Hiroyoshi

JAEA-Testing 2020-004, 67 Pages, 2020/08

JAEA-Testing-2020-004.pdf:8.17MB

In the Japan Materials Testing Reactor (JMTR), the leakage accidents of radioactive waste liquid were occurred from the tanks and pipes of the liquid waste disposal facility in the JMTR tank-yard building in JFY2014. In order to respond to the accident, the tanks and pipes were replaced from JFY2016 to 2019. On the other hand, a lot of cracks were occurred on the concreate wall of the tank-yard building when the frame structure supports were fixed to the concrete wall in the replacement work. Thus, it is necessary to repair the concreate wall of the tank-yard building. Especially, some cracks with swelling (cone-shaped fracture) were raised around some anchor bolts (the post-installed chemical anchor bolts) fixed the frame structure supports. The repairing method for the cone-shaped fracture of the concrete wall is standardized, but there was no reference value of tensile strength for the validation of the post-installed chemical anchor bolts after the repairing method. In this report, the repairing method was selected for the cone-shaped fracture on the concreate wall and the reference value of tensile strength for the validation of the post-installed chemical anchor bolts by this repairing method. The mock-ups for repairing cone-shaped fracture were fabricated by the selected repairing method and the tensile tests of the post-installed chemical anchor bolts were performed. From the results, the validation of the repairing method was obtained in this test and it was obvious the repairing of cone-shaped fracture is preferable method for the concreate wall of the JMTR tank-yard building.

Radiolysis of mixed solutions of Cl and Br and its effect on corrosion of a low-alloy steel

Hata, Kuniki; Inoue, Hiroyuki*; Kojima, Takao*; Kasahara, Shigeki; Hanawa, Satoshi; Ueno, Fumiyoshi; Tsukada, Takashi; Iwase, Akihiro*

Proceedings of Symposium on Water Chemistry and Corrosion in Nuclear Power Plants in Asia 2017 (AWC 2017) (USB Flash Drive), p.304 - 314, 2017/09

A model simulation of radiolysis of mixed solutions of NaCl and NaBr was carried out. The simulation result agreed well with the experimental result, and Br played an important role in determining the amounts of products from water radiolysis. The simulation result also showed that, in highly pure NaCl solutions, the steady-state concentration of a radolytic product, HO, was mainly controlled by three reactions (Cl + OH ClOH, ClOH Cl + OH, and ClOH + H Cl + HO), which indicated that accurate evaluation of the rate constants of these reactions was very important in improving the radiolysis simulation of solutions containing Cl. An immersion test using a low-alloy steel, SQV2A, in the mixed solutions was also carried out under irradiation. The corrosion rate increased or decreased depending on the pH or the concentrations of the halide ions in a similar way to the change in concentration of HO produced from water radiolysis, which is affected by the presence of Cl and Br. However, at high pH values (12), the corrosion rate was almost zero even though the concentration of HO was high. This could be attributed to enhancement of the passivity of test specimens at higher pH values.

Performance confirmation operation of water environment control facility

Magome, Hirokatsu; Okada, Yuji; Tomita, Kenji; Iida, Kazuhiro; Ando, Hitoshi; Yonekawa, Akihisa; Ueda, Haruyasu; Hanawa, Hiroshi; Kanno, Masaru; Sakuta, Yoshiyuki

JAEA-Technology 2015-025, 100 Pages, 2015/09

JAEA-Technology-2015-025.pdf:78.32MB

In Japan Atomic Energy Agency, in order to solve the problem in the long-term operation of a light water reactor, preparation which does the irradiation experiment of light-water reactor fuel and material was advanced. JMTR stopped after the 165th operation cycle in August 2006, and is advancing renewal of the irradiation facility towards re-operation. The material irradiation test facility was installed from 2008 fiscal year to 2012 fiscal year in JMTR. The material irradiation test facility is used for IASCC study, and that consists of mainly three equipments. This report is described performance operating test of the water environmental control facilities for IASCC study carried out 2013 fiscal year.

Installation of the water environment irradiation facility for the IASCC research under the BWR/PWR irradiation environment, 2

Magome, Hirokatsu; Okada, Yuji; Hanawa, Hiroshi; Sakuta, Yoshiyuki; Kanno, Masaru; Iida, Kazuhiro; Ando, Hitoshi; Yonekawa, Akihisa; Ueda, Haruyasu; Shibata, Mitsunobu

JAEA-Technology 2014-023, 267 Pages, 2014/07

JAEA-Technology-2014-023-01.pdf:103.68MB
JAEA-Technology-2014-023-02.pdf:71.92MB

In Japan Atomic Energy Agency, in order to solve the problem in the long-term operation of a light water reactor, preparation which does the irradiation experiment of light-water reactor fuel and material was advanced. JMTR stopped after the 165th operation cycle in August 2006, and is advancing renewal of the irradiation facility towards re-operation. The material irradiation test facility was installed from 2008 fiscal year to 2012 fiscal year in JMTR. This report summarizes manufacture and installation of the material irradiation test facility for IASCC research carried out from 2012 to 2014 in the follow-up report reported before (JAEA-Technology 2013-019).

Development of safety management system for works in radiation controlled area (Joint research)

Hiyama, Kazuhisa; Hanawa, Nobuhiro; Kurosawa, Akihiko; Eguchi, Shohei; Hori, Naohiko; Kusunoki, Tsuyoshi; Ueda, Hisao; Shimada, Hiroshi; Kanda, Hiroaki*; Saito, Isamu*

JAEA-Technology 2013-045, 32 Pages, 2014/02

JAEA-Technology-2013-045.pdf:5.83MB

This report summarizes regarding to develop of real-time multifunctional access control system which is able to manage worker's access control and exposure dose at real-time in the reactor building, besides worker's location and worker might be fall down by accident.

Development of new irradiation facility for BWR safety research

Okada, Yuji; Magome, Hirokatsu; Iida, Kazuhiro; Hanawa, Hiroshi; Omi, Masao

UTNL-R-0483, p.10_4_1 - 10_4_10, 2013/03

In JAEA(Japan Atomic Energy Agency), about the irradiation embrittlement of the reactor pressure vessel and the stress corrosion cracking of reactor core composition apparatus concerning the long-term use of the light water reactor (BWR), in order to check the influence of the temperature, pressure, and water quality, etc on BWR condition. The water environmental control facility which performs irradiation assisted stress corrosion-cracking (IASCC) evaluation under BWR irradiation environment was fabricated in JMTR. (Japan Materials Testing Reactor). This report is described the outline of manufacture of the water environmental control facility for doing an irradiation test using the saturation temperature capsule after JMTR re-operation.

Dismantlement technique of irradiation facilities in JMTR

Onuma, Yuichi; Okada, Yuji; Hanawa, Hiroshi; Tsuchiya, Kunihiko; Kanno, Masaru

JAEA-Review 2010-047, 27 Pages, 2010/11

JAEA-Review-2010-047.pdf:3.0MB

The Japan Materials Testing Reactor (JMTR) has been refurbished to re-operate from 2011. As a part of the establishment of new irradiation facilities, technology development for the dismantling and removing of irradiation facilities such as OWL-1 (Oarai Water Loop No.1), OWL-2 (Oarai Water Loop No.2) and IASCC (Irradiation Assisted Stress Corrosion Cracking) facility installed in the JMTR loop cubicles has been performed. By using developed methods, techniques for the dismantling and removing of the irradiation facilities were established.

Measured and simulated transport of 1.9 MeV laser-accelerated proton bunches through an integrated test beam line at 1 Hz

Nishiuchi, Mamiko; Sakaki, Hironao; Hori, Toshihiko; Bolton, P.; Ogura, Koichi; Sagisaka, Akito; Yogo, Akifumi; Mori, Michiaki; Orimo, Satoshi; Pirozhkov, A. S.; et al.

Physical Review Special Topics; Accelerators and Beams, 13(7), p.071304_1 - 071304_7, 2010/07

https://doi.org/10.1103/PhysRevSTAB.13.071304

A laser-driven repetition-rated 1.9 MeV proton beam line composed of permanent quadrupole magnets (PMQs), a radio frequency (rf) phase rotation cavity, and a tunable monochromator is developed to evaluate and to test the simulation of laser-accelerated proton beam transport through an integrated system for the first time. In addition, the proton spectral modulation and focusing behavior of the rf phase rotationcavity device is monitored with input from a PMQ triplet. In the 1.9 MeV region we observe very weakproton defocusing by the phase rotation cavity. The final transmitted bunch duration and transverse profile are well predicted by the PARMILA particle transport code. The transmitted proton beam duration of 6 ns corresponds to an energy spread near 5% for which the transport efficiency is simulated to be 10%. The predictive capability of PARMILA suggests that it can be useful in the design of future higher energy transport beam lines as part of an integrated laser-driven ion accelerator system.

Design study of the material irradiation facility for the SCC research under the LWR irradiation environment

Onuma, Yuichi; Tomita, Kenji; Okada, Yuji; Hanawa, Hiroshi

JAEA-Technology 2009-034, 79 Pages, 2009/07

JAEA-Technology-2009-034.pdf:11.23MB

Toward the re-operation of Japan Materials Testing Reactor on 2011 F.Y., the construction of new material irradiation facility for the stress corrosion cracking research under the LWR irradiation environment had been planed, and the design study of water control unit for BWR and water chemical study which supply the LWR simulated water to the material irradiation capsule were carried out on 2007 F.Y. The design study of new material irradiation facility was examined including the reflection of the operation experience and the reuse of components on old material irradiation facility. These examination results were summarized in this report.