Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Watanabe, Tomoaki; Suyama, Kenya; Tada, Kenichi; Ferrer, R. M.*; Hykes, J.*; Wemple, C. A.*
Nuclear Science and Engineering, 10 Pages, 2024/00
Times Cited Count：0 Percentile：0.18(Nuclear Science & Technology)A new nuclear data library for the advanced lattice physics code CASMO5 has been prepared based on JENDL-5. In JENDL-5, many essential nuclides for conventional LWR analysis have also been modified based on state-of-the-art evaluations. The new JENDL-5-based CASMO5 library was prepared by replacing as much of the nuclear data of the current CASMO5 ENDF/B-VII.1-based library as possible with JENDL-5. This study verified and validated the new library. Verifications were performed based on the OECD/NEA burnup credit criticality safety benchmark phase III-C, and the calculated k
and fuel compositions of the BWR fuel assembly were compared with reported benchmark results. Comparison with the MCNP6.2 result was also performed using the same benchmark model. In addition, the TCA critical experiment and Takahama-3 post-irradiation experiment were used for validation. The results indicate that the new library performs well and is comparable to the ENDF/B-VII.1-based library in predictions of reactivity and fuel compositions for LWR systems.
Tada, Kenichi; Endo, Tomohiro*
Journal of Nuclear Science and Technology, 60(11), p.1397 - 1405, 2023/11
Times Cited Count：1 Percentile：72.91(Nuclear Science & Technology)The probability table method is a well-known method for addressing self-shielding effects in the unresolved resonance region. A long computational time is required to generate the probability table. The effective way to reduce the generation time of the probability table is the reduction of the number of ladders. The purpose of this study is the estimation of the optimal number of ladders using the statistical uncertainty in the probability table. To this end, the statistical uncertainty quantification method of the probability table was developed and the convergence behavior of the statistical uncertainty was investigated. The product of the probability table and the average cross section was considered the target of the statistical uncertainty. The convergence rate was affected by the average level spacing and reduced neutron width. The generation time of the probability table was less than half when the input parameter was changed from the number of ladders to the tolerance value.
Watanabe, Tomoaki; Tada, Kenichi; Endo, Tomohiro*; Yamamoto, Akio*
Journal of Nuclear Science and Technology, 60(11), p.1386 - 1396, 2023/11
Times Cited Count：3 Percentile：95.99(Nuclear Science & Technology)The burnup calculations for estimating the nuclide composition of the spent fuel are highly dependent on nuclear data. Many nuclides in the latest version of the Japanese Evaluated Nuclear Data Library JENDL-5 were modified from JENDL-4.0 and the modification affects the burnup calculations. This study confirmed the validity of JENDL-5 in the burnup calculations. The PIE data of Takahama-3 was used for the validation. The effect of modifications of the parameters, e.g., cross sections and fission yields, from JENDL-4.0 to JENDL-5 on the nuclide compositions was quantitatively investigated. The calculation results showed that JENDL-5 has a similar performance to JENDL-4.0. The calculation results also revealed that the modifications of the cross sections of actinide nuclides, fission yields, and thermal scattering low data of hydrogen in H
O affected the nuclide compositions of PWR spent fuels.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kimura, Atsushi; Tada, Kenichi; Yokoyama, Kenji
Kaku Deta Nyusu (Internet), (136), 6 Pages, 2023/10
no abstracts in English
Tada, Kenichi
Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 8 Pages, 2023/10
The number of energy grids of the thermal neutron scattering law data has a large impact on the data size of a cross section file of continuous energy Monte Carlo calculation codes. The optimization of the number of energy grids is an effective way to reduce the data size. This study developed the linearization method of the thermal neutron scattering cross section to optimize the number of energy grids and the linearization function was implemented in the nuclear data processing code FRENDY. The linearization process which is used in the resonance reconstruction and the Doppler broadening was adopted. The criticality benchmarks which use ZrH as the moderator were calculated to estimate the impact of the difference of the energy grids on neutronics calculations. The calculation results indicate that the linearization of the thermal neutron scattering cross section improves the prediction accuracy of neutronics calculations.
Watanabe, Tomoaki; Tada, Kenichi; Endo, Tomohiro*; Yamamoto, Akio*
Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 10 Pages, 2023/10
The latest Japanese nuclear data library, JENDL-5, was released in December 2021. In JENDL-5, nuclear reaction cross sections for Gd-155 and Gd-157 were modified in addition to many heavy nuclides such as U-235. Fission yields and decay data, which are essential to characterize burnup fuels, were completely revised. This study investigated the effects of the nuclear data revisions from JENDL-4.0 to JENDL-5 on the neutronic characteristics of burnup fuels to validate JENDL-5. Burnup calculations of the 9x9 STEP-3 BWR fuel assembly based on the OECD/NEA Phase III-C benchmark were performed using JENDL-4.0 and JENDL-5. As a result, the k for JENDL-5 was smaller than that of JENDL-4.0 throughout the burnup, with a large difference of about 600 pcm at 12 GWd/t, around the peak of the k. Above 20 GWd/t, the difference in k increases with increasing burnup value, reaching nearly 600 pcm at 50 GWd/t. In addition, this study investigates which nuclear data contribute significantly to the difference in k by performing burnup calculations with replacing nuclear data of individual nuclides from JENDL-4.0 to JENDL-5.
Tada, Kenichi; Kondo, Ryoichi; Endo, Tomohiro*; Yamamoto, Akio*
Journal of Nuclear Science and Technology, 60(6), p.624 - 631, 2023/06
Times Cited Count：2 Percentile：53.91(Nuclear Science & Technology)The sensitivity analysis and the uncertainty quantification have an important role in improving the evaluated nuclear data library. The current computational performance enables us to the sensitivity analysis and uncertainty quantification using the continuous energy Monte Carlo calculation code. The ACE file perturbation tool was developed for these calculations using modules of FRENDY. This tool perturbs the microscopic cross section, the number of neutrons per fission, and the fission spectrum. The uncertainty quantification using the random sampling method is also available if the user prepares the covariance matrix. The uncertainty of the k-effective using the perturbation tool was compared to the current sensitivity analysis codes SCALE/TSUNAMI and MCNP/KSEN. The comparison results indicated that the random sampling method using this tool accurately estimates the uncertainty of k-effective.
Tada, Kenichi
Kaku Deta Nyusu (Internet), (135), p.1 - 10, 2023/06
This article summarizes presentations at the IAEA technical meeting on nuclear data processing. In this technical meeting, the current development status of nuclear data processing codes and comparisons of the processing results using these codes were presented.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke; Kimura, Atsushi; Nakamura, Shoji; Endo, Shunsuke; Nagaya, Yasunobu; Tada, Kenichi; et al.
EPJ Web of Conferences, 284, p.14001_1 - 14001_7, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)Tada, Kenichi; Endo, Tomohiro*
EPJ Web of Conferences, 284, p.14013_1 - 14013_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)The self-shielding effect in the unresolved resonance region has a large impact on the fast- and intermediate-spectrum reactors. The probability table method is widely used for continuous-energy Monte Carlo calculation codes to treat the effect. In this method, a table provides the probability distribution of the cross-section for a nuclide in the given energy grid points. The table is generated by averaging with a lot of "ladders" which represent pseudo resonance structures. Though many nuclear data processing codes require the number of ladders as an input parameter to generate the probability table, an optimal number of ladders has not been investigated. Our previous study revealed that the suitable number of ladders depends on the nuclide and its resonance parameters. This result indicates that it is very difficult for users to find the optimal number of ladders. We developed the calculation method of the statistical uncertainty for the probability table generation.
Tada, Kenichi; Nagaya, Yasunobu; Taninaka, Hiroshi; Yokoyama, Kenji; Okita, Shoichiro; Oizumi, Akito; Fukushima, Masahiro; Nakayama, Shinsuke
Journal of Nuclear Science and Technology, 21 Pages, 2023/04
Times Cited Count：6 Percentile：98.92(Nuclear Science & Technology)The new version of the Japanese evaluated nuclear data library, JENDL-5, was released in December 2021. This paper demonstrates the validation of JENDL-5 for fission reactor applications. Benchmark calculations are performed with the continuous-energy Monte Carlo codes MVP and MCNP and the deterministic code system MARBLE. The benchmark calculation results indicate that the performance of JENDL-5 for fission reactor applications is better than that of the former library JENDL-4.0.
Tada, Kenichi
Robutsuri No Kenkyu (Internet), (75), 13 Pages, 2023/03
In addition to nuclear data processing, FRENDY has various functions such as editing nuclear data and plotting cross section data. This document introduces these functions.
Tada, Kenichi
Shahei Kaiseki No V&V Gaidorain Sakutei Ni Mukete, p.11 - 16, 2023/03
An overview of the nuclear data processing code FRENDY is introduced for shielding calculation code users who are not familiar with FRENDY. This paper explains the nuclear data processing flow in FRENDY, the purpose of use, input examples, verification and validation reports, and so on.
Tada, Kenichi; Yamamoto, Akio*; Kunieda, Satoshi; Nagaya, Yasunobu
JAEA-Data/Code 2022-009, 208 Pages, 2023/02
JAEA-Data-Code-2022-009.pdf:3.87MB
The nuclear data processing code has an important role to connect evaluated nuclear data libraries and neutronics calculation codes. Japan Atomic Energy Agency (JAEA) has developed the nuclear data processing code FRENDY since 2013 to generate cross section files from evaluated nuclear data libraries, such as JENDL, ENDF/B, JEFF, and TENDL. The first version of FRENDY was released in 2019. FRENDY version 1 generates ACE files which are used for continuous energy Monte Carlo codes such as PHITS, Serpent, and MCNP. FRENDY version 2 generates multi-group neutron cross-section files from ACE files. The other major improvements are as follows: (1) uncertainty quantification for the probability tables of the unresolved resonance cross-section; (2) perturbation of the ACE file for the uncertainty quantification using a continuous Monte Carlo code; (3) modification of the ENDF-6 formatted nuclear data file. This report describes an overview of the nuclear data processing methods and input instructions for FRENDY.
Chiba, Go*; Yamamoto, Akio*; Tada, Kenichi
Journal of Nuclear Science and Technology, 60(2), p.132 - 139, 2023/02
Times Cited Count：2 Percentile：53.91(Nuclear Science & Technology)A new multi-group neutronics analysis sequence ACE-FRENDY-CBZ is proposed. This sequence is free from uses of any application libraries; with the ACE files as the starting point, multi-group cross section data of media comprising a target system are calculated with the FRENDY code, and multi-group neutron transport calculations are performed with modules of the CBZ code system. The ACE-FRENDY-CBZ sequence was tested against the eight fast neutron systems, and good agreement with the reference Monte Carlo results was obtained within 30 pcm differences in the bare systems and the thorium-reflected system, and approximately 100 pcm differences in the uranium-reflected systems. The use of the current-weighted total cross sections in the multi-group neutron transport calculations had non-negligible impacts over 100 pcm on k-eff, and the calculations with the current-weighted total cross sections systematically underestimated k-eff in the uranium-reflected systems.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke; Abe, Yutaka*; Tsubakihara, Kosuke*; Okumura, Shin*; Ishizuka, Chikako*; Yoshida, Tadashi*; et al.
Journal of Nuclear Science and Technology, 60(1), p.1 - 60, 2023/01
Times Cited Count：64 Percentile：99.99(Nuclear Science & Technology)Tada, Kenichi; Yamamoto, Akio*; Kunieda, Satoshi; Konno, Chikara; Kondo, Ryoichi; Endo, Tomohiro*; Chiba, Go*; Ono, Michitaka*; Tojo, Masayuki*
Journal of Nuclear Science and Technology, 10 Pages, 2023/00
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Nuclear data processing code is important to connect evaluated nuclear data libraries and radiation transport codes. The nuclear data processing code FRENDY version 1 was released in 2019 to generate ACE formatted cross section files with simple input data. After we released FRENDY version 1, many functions were developed, e.g., neutron multi-group cross section generation, explicit consideration of the resonance interference effect among different nuclides in a material, consideration of the resonance upscattering, ACE file perturbation, and modification of ENDF-6 formatted file. FRENDY version 2 was released including these new functions. It generates GENDF and MATXS formatted neutron multi-group cross section files from an ACE formatted cross section file or an evaluated nuclear data file. This paper explains the features of the new functions implemented in FRENDY version 2 and the verification of the neutron multigroup cross section generation function of this code.
Yamamoto, Akio*; Endo, Tomohiro*; Chiba, Go*; Tada, Kenichi
Nuclear Science and Engineering, 196(11), p.1267 - 1279, 2022/11
Times Cited Count：1 Percentile：31.61(Nuclear Science & Technology)The resonance upscattering effect (the thermal agitation effect) is incorporated in the generation capability of multi-group neutron cross sections of the FRENDY nuclear data processing system. The resonance upscattering effect is considered by (1) the variation of self-shielding factors (effective cross sections) due to the change in ultra-fine group spectrum and (2) the variation of group-to-group elastic scattering cross sections. In the verification calculations, impacts on the ultra-fine group spectrum, effective cross sections, and neutronics characteristics (the Doppler effect) are confirmed. The effect of energy group structure and the treatments of resonance upscattering on the Doppler effect through the variation of effective cross sections and the elastic scattering matrix are studied. The results indicate that the FRENDY can provide appropriate multi-group cross sections considering the resonance upscattering effect.
Konno, Chikara; Tada, Kenichi; Kwon, Saerom*
Proceedings of 14th International Conference on Radiation Shielding and 21st Topical Meeting of the Radiation Protection and Shielding Division (ICRS-14/RPSD 2022) (Internet), p.440 - 443, 2022/11
Neutron spectra inside a sphere of 1 m in radius, made of one natural isotope with unresolved resonance data, with an isotropic neutron source of 20 MeV at the center were calculated with the ANISN code and JENDL-4.0 MATXS file MATXSLIB-J40. Then unphysical neutron spectra produced in unresolved resonance data processing with the NJOY code were obtained. We examined its reasons and specified that unrealistic cross sections in dips between resonances caused the unphysical neutron spectra. We also demonstrated that this problem was solved by modifying NJOY.
Kamiya, Tomohiro; Ono, Ayako; Tada, Kenichi; Akie, Hiroshi; Nagaya, Yasunobu; Yoshida, Hiroyuki; Kawanishi, Tomohiro
Proceedings of 29th International Conference on Nuclear Engineering (ICONE 29) (Internet), 8 Pages, 2022/11
JAEA started to develop the advanced reactor analysis code JAMPAN (JAEA advanced multi-physics analysis platform for nuclear systems). The current version of JAMPAN handles the continuous energy Monte Carlo code MVP and the detailed thermal-hydraulics analysis code for multiphase and multicomponent JUPITER. JAMPAN is designed to consider the extensibility and it does not depend on the analysis codes. All calculations in JAMAPAN are not directly connected. JAMPAN has data containers, and all input and output data of each analysis code are set in these data containers. JAMPAN will easily exchange the calculation codes and add the other calculations, e.g., structure calculation and irradiation calculation since the input and the output format of each code has no impact on the other calculation codes. The 4 by 4 pin-cell geometry was used as the demonstration calculation of JAMPAN and the physically reasonable calculation results were obtained.
